tft_espi and ShiftRegister74HC595.h Solved.

[fungreenfox]

When using both ShiftRegister74HC595.h and TFT_eSPI, the ShiftRegister74HC595.h doesn't send its commands out to the IC.
How to get this to work aside?

[fungreenfox]

I might have solved this. ShiftRegister74H595.h and TFT_eSPI for ili9488
//all pins defined for the shiftregister are output, and pinmode is set from the library.
// Define Connections to 74HC595
#include <ShiftRegister74HC595.h>
// ST_CP pin 14
const int latchPin = 14;
// SH_CP pin 11
const int clockPin = 16;//using RX pin instead of the suggested pin 23
// DS pin 14
const int serialDataPin = 12;
const int numberOfShiftRegisters = 1; // number of shift registers attached in series
ShiftRegister74HC595 sr(serialDataPin, clockPin, latchPin);

Confirmed tft_cs works for touch, and colors are ok.
#define T_DO 19
#define T_DIN 23
#define T_CS 5
#define T_CLK 18
#define TFT_MISO 19
#define TFT_MOSI 23
#define TFT_SCLK 18
#define TFT_CS 15 // Chip select control pin
#define TFT_DC 2 // Data Command control pin
#define TFT_RST 4 // Reset pin (could connect to RST pin)
#define TFT_BL 25 // LED back-light (required for M5Stack)
#define TOUCH_CS 5 // Chip select pin (T_CS) of touch screen

If this has used up the last output pins, any output pin can optionally be from the 74H595N.