From 81c93f0896da0508285a4d31c931d8bc6485bde7 Mon Sep 17 00:00:00 2001 From: Alexey Cluster Date: Tue, 5 Sep 2023 11:37:34 +0400 Subject: [PATCH] Update README.md --- README.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index b401227..b98530d 100644 --- a/README.md +++ b/README.md @@ -181,7 +181,7 @@ Remember, you can update the firmware by putting **FdsKey.bin** on your SD card ## Twin Famicom compatibility You can use FDSKey with Twin Famicom too. But you need a special cable. It's easy to make one. -![image](https://github.com/ClusterM/fdskey/assets/4236181/256291b7-1692-4cd1-9c2b-ba24c9a80ced) +![image](https://github.com/ClusterM/fdskey/assets/4236181/ac4cf2db-8759-4c9c-b0d3-c9a8671d56e2) It has a simple 12x1 dupont connector on the one side, you need to connect it to Twin Famicom's **Port C** on the back-bottom side (instead of the original cable). @@ -219,9 +219,11 @@ Pin meanings +----+---------------------------+ ``` -You **must** pull-up **write data** line to **VCC** via resistor (5K-10K) if you want to save game progress, because Twin Famicom has no pull-up resistors inside it. Also, it's recommended to pull-up **/scan media** pin to **VCC** too if you want to hot plug the FDSKey. +You **must** pull-up **write data** line to **VCC** via resistor (5K-20K) if you want to save game progress, because Twin Famicom has no pull-up resistors inside it. -Also, don't forget to upgrade the FDSKey firmware to at least **v1.3**. +![image](https://github.com/ClusterM/fdskey/assets/4236181/5db18827-8eb9-4a70-b908-9f6a848f32de) + +Also, it's recommended to pull-up **/media set** pin to **VCC** too if you want to hot plug the FDSKey. And don't forget to upgrade the FDSKey firmware to at least **v1.3**. ## Donate