Light Calib Issue

[diaza]

Making this issue so I don't forget.

I think the lines below have to be updated to take into account the different channel mapping. It's still assuming the 2x2 mapping, which have different unused channels, so e.g. channels 0-3 will be zeroed out in sim for anything after the calibration step.

ndlar_flow/yamls/fsd_flow/reco/light/WaveformCalib.yaml

Line 29 in 1921255

0: {4 : 0.022857, 5 : 0.022857, 6 : 0.022857, 7 : 0.022857, 8 : 0.022857, 9 : 0.022857, 10 : 0.022857, 11 : 0.022857, 12 : 0.022857, 13 : 0.022857, 14 : 0.022857, 15 : 0.022857,

You won't see this in the saved waveforms, since it's the raw waveforms that are saved.

[jvmead]

I suspect you're correct - for the FSD, the unused channels are 30, 31, 62, 63

Also, in 2x2, each ADC is all the LCMs or ACLs in a module (so across 2 TPCs)
By contrast, in FSD, you have one whole side of a TPC (ACLs and LCMs) all on one ADC.