bug version 1.2b

[ah1102]

Versions

• Candle version: 1.2.*
• Firmware version: 1.1f

PC info

• OS: win10

Describe the bug

1)There are no tips

2. Keys do not work in the process - pause and interrupt. Two right buttons in the right in the photo.
   

[Hostaler]

Hello good morning, the same thing happens to me and in the end Denvi recommended me to install version 1.17 , although I see 1.2b as much more complete but for the moment I don't see another solution.

[Hostaler]

You have a fork of Denvi\Candle here, but I don't know if it works well.

https://github.com/mar0x/Candle

It is also experimental .

[mar0x]

You have a fork of Denvi\Candle here, but I don't know if it works well.

https://github.com/mar0x/Candle

It is also experimental .

I think experimental version is overcomplicated and I almost don't touch it.

[Hostaler]

Tienes una bifurcación de Denvi\Candle aquí, pero no sé si funciona bien.
https://github.com/mar0x/Candle
También es experimental.

Creo que la versión experimental es demasiado complicada y casi no la toco.

😞😞

[Samer-Amin]

Versions

• Candle version: 1.2.*
• Firmware version: 1.1f

PC info

• OS: win10

Describe the bug

1)There are no tips

2. Keys do not work in the process - pause and interrupt. Two right buttons in the right in the photo.
   

These keys are user defined in settings.

[paulfjujo]

hello,

my config

O.S.: WIN 10
using YAT PC terminal 115200bds

Makerbase GRBL ESP32 board V2.0
$I
[VER:1.1.2022051001:]
[OPT:PHSW]
[MSG:Using machine:MKS DLC32]
[MSG:Mode=AP:SSDI=Ma_CNC:IP=192.168.4.1:MAC=AC-15-18-CB-54-85]
ok
ok

i can get Pins status infos with this command
concern
[MSG:X Axis limit switch on pin GPIO(36)]
[MSG:Y Axis limit switch on pin GPIO(35)]
[MSG:Z Axis limit switch on pin GPIO(34)]
[MSG:Probe on pin GPIO(22)]

?
<Idle|MPos:0.000,0.000,0.000|FS:0,0|WCO:3.000,3.000,-3.000>
ok
ok

but with Candle version 1.2.15b
$HELP &lt; [HLP:$$ $+ $# $S $L $G $I $N $x=val $Nx=line $J=line $SLP $C $X $H $F $E=err ~ ! ? ctrl-x]
same command ?
? < ok
Problemo : no information returned !

[JoanTheSpark]

@paulfjujo

but with Candle version 1.2.15b H E L P < [ H L P : $ + # $S $L $G $I $N $x=val $Nx=line $J=line $SLP $C $X $H $F $E=err ~ ! ? ctrl-x] same command ? ? < ok Problemo : no information returned !

Open a separate issue - if you post additional problems in a different issue tracker it is being ignored.