How to find e2001 zigbee2mqtt controller_entity

[wallzero]

My e2001 controller is working in Home Assistant with Zigbee2MQTT but I currently use device ID's:

alias: Bedroom Switch Turn Down
description: ""
trigger:
  - platform: device
    domain: mqtt
    device_id: abcdefg1234567
    type: action
    subtype: "off"
    discovery_id: 0x00abcd123 action_off
condition: []
action:
  - target:
      entity_id:
        - light.bedroom_lamps
    data:
      brightness_step_pct: -6
    action: light.turn_on
mode: single

I would like to switch to using the e2001 blueprint but can't figure out how to get the action sensor/controller_entity for Zigbee2MQTT devices.

[bernarddery]

Same question here, the documentation isn't clear on this.

[yarafie]

Hi @bernarddery @wallzero

From the questions above it doesn't seem that you quiet understand what blueprints are in homeassistant. You don't need to worry about device id's etc. the blueprint takes cate of it all.

I suggest you read the below Home Assistant Documentation first.
https://www.home-assistant.io/docs/automation/using_blueprints/
Then read again the EPMatt docs starting from here
https://epmatt.github.io/awesome-ha-blueprints/

After that, the below steps should make more sense.

1. Download the blueprint to homeassistant (The EPMatt one for the e2001 is at the below link)
   https://epmatt.github.io/awesome-ha-blueprints/docs/blueprints/controllers/ikea_e2001_e2002/
2. Go into homeassistant -> Settings -> Automations & scenes -> Blueprints
3. Select the Blueprint you want to configure (The EPMatt one for e2001 wil be Controller - IKEA E2001/E2002 STYRBAR Remote control)
4. Fill in the form that appears.
5. Save -> Rename (You can now fill in a name for your Automation that will be created)
6. Go to homeassistant -> Settings -> Automations & scenes -> Automations
7. You should see your Automation (With the nane you gave it in step 5) listed there.