Doesn't boot on OrangePi Zero 2

[osscombat]

Hi,
Just gave it a try on a new OPiZ2 recently - it doesn't work as expected. No IP-address is being requested, no signal over mHDMI, network LEDs are blinking though.

Note: RPI4 image boots fine even on RPi3, but probably this board is too weak, the sound is jerking badly in the browser.

[F1ATB]

RPI3 is too weak. OPIZ2, may be an issue with the SD card. Currently Remote SDR version 5 image is running correctly on OPIZ2. I have good return I have one running just in front of me. 73 F1ATB Le mar. 21 mars 2023 à 15:49, osscombat ***@***.***> a écrit :

…

Hi, Just gave it a try on a new OPiZ2 recently - it doesn't work as expected. No IP-address is being requested, no signal over mHDMI, network LEDs are blinking though. Note: RPI4 image boots fine even on RPi3, but probably this board is too weak, the sound is jerking badly in the browser. — Reply to this email directly, view it on GitHub <#32>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACN7K5OD7T3JBONW5DKBQZLW5G5WLANCNFSM6AAAAAAWCRUPCY> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

-- André Buhart F1ATB https://f1atb.fr https://sea-seek.com

[osscombat]

It's not the sdcard, I have tried two different. Official 3.0.6 debian image boots fine, will try the manual install. вт, 21 мар. 2023 г., 19:27 F1ATB ***@***.***>:

…

RPI3 is too weak. OPIZ2, may be an issue with the SD card. Currently Remote SDR version 5 image is running correctly on OPIZ2. I have good return I have one running just in front of me. 73 F1ATB Le mar. 21 mars 2023 à 15:49, osscombat ***@***.***> a écrit : > Hi, > Just gave it a try on a new OPiZ2 recently - it doesn't work as expected. > No IP-address is being requested, no signal over mHDMI, network LEDs are > blinking though. > > Note: RPI4 image boots fine even on RPi3, but probably this board is too > weak, the sound is jerking badly in the browser. > > — > Reply to this email directly, view it on GitHub > <#32>, or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ACN7K5OD7T3JBONW5DKBQZLW5G5WLANCNFSM6AAAAAAWCRUPCY > > . > You are receiving this because you are subscribed to this thread.Message > ID: ***@***.***> > -- André Buhart F1ATB https://f1atb.fr https://sea-seek.com — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHJ2YGOE72SNIYQCZ7U4K6LW5HJFTANCNFSM6AAAAAAWCRUPCY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[dona76]

I encountered the same problem: partial boot with the armbian logo on the hdmi output then nothing but the fixed cursor.
I replaced the Intenso 16GB microSD card with a Sandisk 32GB and it works. Both are marked: UHS I, V30, Class 10, 4k camera, UHS class 30MB/s...
See : http://www.orangepi.org/orangepiwiki/index.php/Orange_Pi_Zero_2#Prepare_the_necessary_accessories