No devices displayed

[nioakeim]

Description of the issue

Hi,
i am having some trouble getting this add on to work and i would appreciate a little bit of help/guidance.

On my setup i have a ps5 with remote play on, and while i see the below message

Starting PS5-MQTT...
2025-05-19T06:29:21.801Z @ha:ps5:webserver Server listening on PORT: 64947
2025-05-19T06:29:21.830Z @ha:ps5:mqtt MQTT Message received ps5-mqtt/XXXXX

on the WebUI the devices list is empty and only the refresh button is visible.

Have you seen this behaviour before? Any hints on what am i doing wrong here?

Addon version

1.4.0

Platform

Core: 2025.3.4
Supervisor: 2025.05.1
Operating System: 15.2

Logs of the issue (if applicable)

No response

[dimon90]

Same for me =(

Core: 2025.5.2
Supervisor: 2025.05.1
Operating System: 15.2

[nioakeim]

Hey for anyone having this issue, i had to put my broadcast address of my network. My hass has 2 interfaces for iot and local lan, so following the instructions to setup, i had configured with the ip on the network my PS5 was located.

For my setup, my ip of the Home Assistant was 10.44.55.10, but i had to set the broadcast which was 10.44.55.255.

I also did a reset to the default config with no broadcast address and also worked! So the default should be ok.

[dimon90]

Hey for anyone having this issue, i had to put my broadcast address of my network.

Thanks! It worked!

[github-actions]

This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 5 days