Bluetooth connections

[frtytw]

I'm having trouble re-establishing connections with computers.
The board will either show up, and does not want to connect, or will not connect at all.
I have stuck to the default keymap, for testing, etc.

I have tried:

1. Reseting (hold TAB, hit ESC and let go, hit Q)
2. BLT_CLR (hold TAB, hit ESC and let go, hit W)
3. BLT_NEXT (hold TAB, hit ESC and let go, hit R)
4. Re-flashing with the provided firmware
5. Building firmware from zmk-config-totem

Does anyone have ideas?

[janpfischer]

I have the same problem. Can't get bluetooth connecting. Either with pre-build firmware or builded from zmk-config-totem

[janpfischer]

@frtytw For me I fixed it.
The build.yml in the cmk-config-totem says you do not need a setting reset firmware (https://github.com/GEIGEIGEIST/zmk-config-totem/blob/master/build.yaml#L6) for seeeds but I just tried it.

I created a settings reset firmware like documented here: https://zmk.dev/docs/troubleshooting/connection-issues#building-a-reset-firmware
I forked the https://github.com/GEIGEIGEIST/zmk-config-totem repo and added the firmware to my build.yml.
After that I set the seeed into bootloader mode and flashed the firmware.
Right after that I set the seeed into bootloader mode again and flashed the normal firmware (from my build) for the left side.
I was able to connect via Bluetooth first try again.

Hope this helps!

[amithshettya]

Thanks @janpfischer , This solution worked for me.