diff --git a/configuration/network-boot-rpi.md b/configuration/network-boot-rpi.md
new file mode 100644
index 0000000..2803f07
--- /dev/null
+++ b/configuration/network-boot-rpi.md
@@ -0,0 +1,132 @@
+# Network Boot \(Raspberry Pi\)
+
+PXE booting with `SYSTEM` and `/storage` mounted via NFS is supported on Generic x86\_64 and Raspberry Pi devices. In the following writeup the server is Debian stable.
+
+## Server \(Debian\)
+
+In my case, the netboot server is reachable at 192.168.0.8, and the Raspberry Pi 2 (v1.1) shall get a fixed IP address 192.168.0.30.
+
+On the netboot server, we need to install and configure DHCP, TFTP, and NFS services:
+
+```text
+sudo apt install isc-dhcp-server tftpd-hpa nfs-kernel-server
+```
+
+### DHCP
+
+Edit `/etc/dhcp/dhcpd.conf` and change the DHCP `range` if needed. Create entries in the `host` section for your Raspberry Pi client\(s\):
+
+```text
+authoritative;
+
+default-lease-time 86400;
+max-lease-time 86400;
+
+ddns-update-style none;
+
+subnet 192.168.0.0 netmask 255.255.255.0 {
+  option routers 192.168.0.1;
+}
+
+host kodipi {
+  hardware ethernet b8:27:eb:XX:XX:XX;  # put your Raspberry Pi's MAC address here
+  fixed-address 192.168.0.30;
+  next-server 192.168.0.8;
+  option vendor-encapsulated-options "Raspberry Pi Boot";  # Important!
+}
+```
+
+Edit `/etc/default/isc-dhcp-server` to set the interface name handling DHCP requests:
+
+```text
+INTERFACES="eth0"
+```
+
+### NFS
+
+Create the directories that will contain your `/storage` userdata and TFTP boot files, e.g.
+
+```text
+sudo mkdir /srv/nfs/kodipi
+sudo mkdir -m777 /srv/tftp
+```
+
+Then add the following lines to the `/etc/exports` file:
+
+```text
+/srv/nfs/kodipi  192.168.0.30/255.255.255.0(no_root_squash,rw,async,no_subtree_check)
+/srv/tftp        192.168.0.30/255.255.255.0(no_root_squash,rw,async,no_subtree_check)
+```
+
+### TFTP
+
+You can leave `/etc/default/tftpd-hpa` at the default:
+
+```text
+# /etc/default/tftpd-hpa
+
+TFTP_USERNAME="tftp"
+TFTP_DIRECTORY="/srv/tftp"
+TFTP_ADDRESS=":69"
+TFTP_OPTIONS="--secure"
+```
+
+### Firewall
+
+I have not installed a firewall on my netboot server, but if you do, you might need to do several things:
+
+Add rules to allow ports for TFTP \(69\) and ONRPC \(111\).
+
+Clients normally connect to the NFS server on random ports, so it the firewall is active "mountd" needs to be told to use a fixed port allowed through the firewall, or boot will hang.
+
+Edit `/etc/default/nfs-kernel-server` and replace the current `RPCMOUNTDOPTS` line. In the example below `8765` is a randomly chosen port:
+
+```text
+RPCMOUNTDOPTS="-p 8765"
+```
+
+Create a matching firewall rule to allow access to that port.
+
+### Services
+
+And finally, start services:
+
+```text
+sudo service isc-dhcp-server start
+sudo service nfs-kernel-server start
+sudo service tftpd-hpa start
+```
+
+## Client \(LibreELEC\)
+
+Download the tar image for your Raspberry Pi and unpack it.
+
+- Copy (or move) all the files and directories from the `3rdparty/bootloader` directory of the tar image to `/srv/tftp`.
+- Copy (or move) the `SYSTEM` and `KERNEL` files from the `target` directory to `/srv/tftp` too.
+- Rename the `KERNEL` file in `/srv/tftp` to `kernel.img`.
+- Create a `cmdline.txt` file in `/srv/tftp` and add:
+
+```text
+boot=NFS=192.168.0.8:/srv/tftp disk=NFS=192.168.0.8:/srv/nfs/kodipi ip=192.168.0.30:192.168.0.8:192.168.0.1:255.255.255.0:kodipi:eth0:off:192.168.0.1 overlay quiet toram
+```
+
+Replace `192.168.0.8` with the NFS server IP address.
+Replace the first `192.168.0.1` in the `ip=` parameter with the default router's IP address.
+Replace the second `192.168.0.1` in the `ip=` parameter with a DNS server's IP address, likely the same as the default router's IP address.
+
+Details on the `ip=` parameter can be found at https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/admin-guide/nfs/nfsroot.rst#n88
+
+The `overlay` parameter is not required if you only intend to boot one system, on the other hand, this guide only handles environments with one statically configured Raspberry Pi.
+
+The `toram` parameter speeds operation up quite a bit by copying the `SYSTEM` file to the Raspberry Pi's RAM. This eats about 130 MBytes of RAM, so don't do that on a model with less than one gigabyte of RAM.
+
+You can add an `ssh` parameter to enable the SSH server. This enables SSH connections with the default password!
+
+- Acquire a \(micro\)SD card that fits in your Raspberry Pi, partition it to have a FAT32 partition as the first partition. It only needs to fit an about 64 kilobyte file.
+- Format that partition (as FAT32 of course).
+- Copy the `/srv/tftp/bootcode.bin` file to that partition.
+- Insert the \(micro\)SD card into your Raspberry Pi.
+
+LibreELEC is now configured to boot using TFTP and NFS!
+
+This works fine with my Raspberry Pi 2 B, Version 1.1, which is not netboot capable without an SD card.