MIPS pseudo instructions

Pseudo-instructions

In MIPS, some operations can be performed with help of other instructions. The most common operations are unified in pseudo-instructions — they can be coded in assembly language, and assembler will expand them to real instructions according to following rules:

Name	Assembly syntax	Expansion	Operation in C
Data moves
move	move $t, $s	addiu $t, $s, 0	t = s
clear	clear $t	addu $t, $zero, $zero	t = 0
load 32-bit immediate	li $t, C	lui $t, C_hi ori $t, $t, C_lo	t = C
load address	la $t, C	lui $at, 0x1001 ori $t, $at, C	`t = 0x10010000
Branches
branch unconditionally	b C	beq $zero, $zero, C	goto PC + 4 + (C << 2)
branch unconditionally and link	bal C	bgezal $zero, C	ra = PC + 8; goto PC + 4 + (C << 2)
branch if greater than	bgt $s, $t, C	slt $at, $t, $s bne $at, $zero, C	if (s > t) goto PC + 4 + (C << 2)
branch if less than	blt $s, $t, C	slt $at, $s, $t bne $at, $zero, C	if (s < t) goto PC + 4 + (C << 2)
branch if greater than or equal	bge $s, $t, C	slt $at, $s, $t beq $at, $zero, C	if (s >= t) goto PC + 4 + (C << 2)
branch if less than or equal	ble $s, $t, C	slt $at, $t, $s beq $at, $zero, C	if (s <= t) goto PC + 4 + (C << 2)
branch if greater than unsigned	bgtu $s, $t, C	sltu $at, $t, $s bne $at, $zero, C	if (s > t) goto PC + 4 + (C << 2)
branch if zero	beqz $s, C	beq $s, $zero, C	if (s == 0) goto PC + 4 + (C << 2)
Multiplications/Divisions
multiplicate and return 32 bits	mul $d, $s, $t	mult $s, $t mflo $d	d = (s * t) & 0xFFFFFFFF
quotient	div $d, $s, $t	div $s, $t mflo $d	d = s / t
remainder	rem $d, $s, $t	div $s, $t mfhi $d	d = s % t
Jumps
jump register and link to ra	jalr $s	jalr $s, $ra	ra = PC + 4; goto s;
Logical operations
not	not $t, $s	nor $t, $s, $zero	t = ~s
No-operations
nop	nop	sll $zero, $zero, 0	{}

No-operations

In fact, every MIPS instruction that has $zero as its destination and doesn't access memory and/or I/O system, can be treated as a nop; but using sll $zero, $zero, 0 is the most convinient because it's byte code is all-zeroes 0x00000000.

---

Shall I implement pseudo-instructions in assignments?

Since 2014/2015, you don't have to implement pseudo-instructions output in MIPT-MIPS assignments, all instructions must be printed as real MIPS instructions. Unexpanded pseudo-instructions are left only in testing traces source files (.s files).