Unpopulated zone field for Kress RTK

[smornierHA]

Describe the issue

Hello,
First of all thank you very much for you work !
I just wanted to raise an issue regarding the zone field which is not populated for Kress RTK; the value is always 0.
Thanks

What version of Home Assistant Core has the issue?

core-2024.3.0

What was the last working version of Home Assistant Core?

No response

What version of the Landroid Cloud integration do you have installed

4.0.2

What type of installation are you running?

Home Assistant OS

Which make and model is the mower used for this integration?

Kress RTK KR174E

Diagnostics information (NOT log entries!)

none

Relevant log entries

none

Additional information

No response

[MTrab]

I'd need some credentials sent to landroid_cloud (at) trab.dk to debug on this

[MTrab]

This could be fixed by #544 when merged and published

[MTrab]

Please update to v4.0.4 and check if this fixes this issue

[smornierHA]

Hello,
Thank you for your feedback, unfortunately it's still the same :
device_class: landroid_cloud__state
friendly_name: RTK
supported_features: 7
accessories:
cellular: true
electric_height_adjustment: true
ultrasonic: true
party_mode_enabled: false
torque: 0
zone:
current: 0
index: 0
indicies:
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
- 0
starting_point:
- 0
- 0
- 0
- 0
supported_landroid_features: 3903

[MTrab]

Then there is no way around me getting access to a device like this, for trying to fix it

[johngianni]

@MTrab would this yaml be sufficient? I've tried to fix this as well, finding a way to force the Zone Number into the correct variable. But after the last release things have changed quite a bit, so I give up. AS you can see, the zone number is in a completely different place , peculiar to the RTK protocol. I would give you credentials, but don't know where to send a direct message.

{ "cfg":{ "id":0, "lg":"de","tz":"Europe/Rome", "rd":0, "cmd":0, "tq":0, "al":{"lvl":0,"t":60},"cut":{"t":1,"z":[9,28],"d":-1,"rm":0}, "sc":{"enabled":1,"paused":0,"freq":0,"slots":[{"d":1,"e":1,"s":0,"t":15, "cfg":{"cut":{"z":[29]}}},{"d":5,"e":1,"s":0,"t":780, "cfg":{"cut":{"z":[25]}}}]}, "modules":{"US":{"enabled":1}, "4G":{"enabled":0,"geo":{"dist":50}}, "EA":{"h":45}}, "rtk":{ "map":"x", "ck":"x","st":1,"zs":[{ "id":2, "cfg":{ "modules":{ "EA":{"h":45}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":8, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":9, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":13, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":16, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":17, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":18, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":20, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":25, "cfg":{ "modules":{ "EA":{"h":54}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":26, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":27, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":28, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":29, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":31, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":33, "cfg":{ "modules":{ "EA":{"h":50}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}},{ "id":34, "cfg":{ "modules":{ "EA":{"h":55}}, "sc":{"freq":2880},"cut":{"t":1,"d":-1}}}]},"dk":{"id":[0], "mac":[]}}, "dat":{"uuid":"x", "tm":"2024-04-15T13:20:50.955Z", "fw":"3.33.0+11", "ls":7,"le":0,"conn":"4G", "sc":{"slot":0},"sh":0, "bt":{"t":41,"v":17,"p":38,"nr":90,"c":0,"m":0}, "dmp":[44.4363136291504,340.40051269531248,-149.40017700195312], "st":{"b":0,"d":0,"wt":0,"bl":0}, "rsi":-71,"act":1, "rain":{"s":0,"cnt":0}, "rtk":{"network":{"status":0,"error":0},"gps":{"status":0,"error":0},"imu":{"status":0}}, "head":{"uuid":"x","act":1, "fw":"1.3.15+27"},"cut":{"z":9}, "modules":{"US":{"stat":"ok"}, "4G":{"mode":0,"stat":"ok","vers":"x","network":{"status":"connected","ICCID":"xxxxxx","IMSI":"x","mode":"Cat-M1","rssi":-71},"geo":{"stat":"unset"},"gps":{"coo":[x,x]}}, "EA":{"stat":"ok","error":0}}} }

[MTrab]

Can't even spot the zones definition in that JSON snippet

[johngianni]

Thanks for coming back Please see the screenshots. Did some testing and I think this could help, at least to have the current zone in the Attributes of the lawn_mower device. It would be very useful to calculate the time taken to mown a certain zone.

[cm86]

Hello @MTrab,
do you still need some credentials?

Mit freundlichen Grüßen
Chris

[MTrab]

Right now it seems like I need to rethink the whole zone thing in the integration, as previously only 4 zones were supported and now there seems like no limit.

So as for now the zones support for newer devices will not work.

[cm86]

yes - that's right for the Kress RTK Mowers.

i have in the one map 9 Zones.
and in the other map 14 in the other map.
i also don't think that you have a limit in this.
the only limit i know is that the area must not exceed the maximum area of the corresponding mower.
for example the KR173E can just have a maximum area of 5000 sqm maped.

Mit freundlichen Grüßen
Chris