barometer

---

Barometer Click

Barometer Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : MikroE Team
• Date : Jan 2020.
• Type : I2C/SPI type

Software Support

Example Description

This application measures temperature and pressure data.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.Barometer

Example Key Functions

• barometer_cfg_setup Config Object Initialization function.

void barometer_cfg_setup ( barometer_cfg_t *cfg );

• barometer_init Initialization function.

err_t barometer_init ( barometer_t *ctx, barometer_cfg_t *cfg );

• barometer_default_cfg Click Default Configuration function.

void barometer_default_cfg ( barometer_t *ctx );

• barometer_get_temperature_c Read temperature in degrees Celsius function.

float barometer_get_temperature_c( barometer_t *ctx );

• barometer_get_pressure Read pressure in milibars function.

float barometer_get_pressure ( barometer_t *ctx );

• barometer_check_status Check sensor status function.

uint8_t barometer_check_status( barometer_t *ctx );

Application Init

Initialization driver enable's - I2C, set default configuration and start write log.

void application_init ( void )
{
    log_cfg_t log_cfg;
    barometer_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    barometer_cfg_setup( &cfg );
    BAROMETER_MAP_MIKROBUS( cfg, MIKROBUS_1 );
    barometer_init( &barometer, &cfg );

    barometer_default_cfg( &barometer );

    // Check sensor id
    if ( barometer_check_id( &barometer ) != BAROMETER_DEVICE_ID )
    {
        log_printf( &logger, "   ERROR  \r\n " );
    }
    else
    {
        log_printf( &logger, "   Initialization  \r\n" );
    }
        
    log_printf( &logger, "-------------------------------- \r\n" );
    Delay_100ms( );
}

Application Task

This is a example which demonstrates the use of Barometer Click board

void application_task ( void )
{
    float temperature_c;
    float pressure;

    temperature_c = barometer_get_temperature_c( &barometer );
    Delay_100ms( );

    pressure = barometer_get_pressure( &barometer );
    Delay_100ms( );

    log_printf( &logger, " Temperature : %.2f\r\n", temperature_c );

    log_printf( &logger, " Pressure    : %.2f\r\n", pressure );
    log_printf( &logger, "-------------------------------- \r\n" );

    Delay_1sec( );
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---