Skip to content

Latest commit

 

History

History
128 lines (97 loc) · 3.94 KB

README.md

File metadata and controls

128 lines (97 loc) · 3.94 KB

Boost 11 Click

Boost 11 Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

Click Library

  • Author : Nenad Filipovic
  • Date : Jan 2024.
  • Type : ADC type

Software Support

Example Description

This example demonstrates the use of Boost 11 Click board by controlling the output state.

Example Libraries

  • MikroSDK.Board
  • MikroSDK.Log
  • Click.Boost11

Example Key Functions

  • boost11_cfg_setup Config Object Initialization function.
void boost11_cfg_setup ( boost11_cfg_t *cfg );
  • boost11_init Initialization function.
err_t boost11_init ( boost11_t *ctx, boost11_cfg_t *cfg );
  • boost11_active_mode This function activates the boost operating mode.
void boost11_active_mode ( boost11_t *ctx );
  • boost11_read_an_pin_voltage This function reads results of AD conversion of the AN pin and converts them to proportional voltage level.
err_t boost11_read_an_pin_voltage ( boost11_t *ctx, float *data_out );

Application Init

Initialization of GPIO module, log UART, and activate the boost operating mode.

void application_init ( void )
{
    log_cfg_t log_cfg;          /**< Logger config object. */
    boost11_cfg_t boost11_cfg;  /**< Click config object. */

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, " Application Init " );

    // Click initialization.
    boost11_cfg_setup( &boost11_cfg );
    BOOST11_MAP_MIKROBUS( boost11_cfg, MIKROBUS_1 );
    if ( ADC_ERROR == boost11_init( &boost11, &boost11_cfg ) )
    {
        log_error( &logger, " Communication init." );
        for ( ; ; );
    }
    
    boost11_active_mode( &boost11 );
    Delay_ms ( 100 );
    
    log_info( &logger, " Application Task " );
}

Application Task

The demo application reads measurements of the output voltage level [V]. Results are being sent to the UART Terminal, where you can track their changes.

void application_task ( void ) 
{
    float voltage = 0;
    if ( BOOST11_OK == boost11_read_an_pin_voltage ( &boost11, &voltage ) ) 
    {
        log_printf( &logger, " Output Voltage : %.3f[V]\r\n\n", voltage );
        Delay_ms ( 1000 );
    }
}

Application Output

This Click board can be interfaced and monitored in two ways:

  • Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
  • UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.