From ce63d0fa764bb56304fcf0aaa0b2931429b91b71 Mon Sep 17 00:00:00 2001
From: Chiara Monforte <75482817+MOchiara@users.noreply.github.com>
Date: Mon, 19 Aug 2024 10:21:57 +0200
Subject: [PATCH] try and fix photo not showing

---
 sections/chla_sensors_integration.md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sections/chla_sensors_integration.md b/sections/chla_sensors_integration.md
index cdc93b4..4f6db74 100644
--- a/sections/chla_sensors_integration.md
+++ b/sections/chla_sensors_integration.md
@@ -42,14 +42,14 @@ input from expert needed
 
 #### SeaExplorer
 On SeaExplorer gliders, the various existing fluorescence sensors can be installed in either/both (depending on the sensor) the front wet payload section (called the nose cone) or the dry payload section in one of the four (4) puck ports. External mounting using the external puck mounts on the dry payload section is also feasible, but this configuration is rare. (we can add more details and photos too)
-The mounting options available for the different sensors on a SeaExplorer can be seen in {numref}`WetlabsSX`.
+The mounting options available for the different sensors on a SeaExplorer can be seen in {numref}`wetlabs_SX`.
 
 <!--
 ![Wetlabs sensor mounted on SX without the protective copper plate.](/images/wetlabs_SX.png)
 --> 
 
 :::{figure-md} WetlabsSXNC
-<img src="wetlabs_SX.png" alt="WetlabsSX" class="bg-primary mb-1" width="400px">
+<img src="wetlabs_SX.png" alt="wetlabs_SX" class="bg-primary mb-1" width="400px">
 
 Wetlabs ECOPuck mounted on one of the side ports in the dry payload section of a SeaExplorer. In the right photo, the protective copper plate used to prevent biofouling is present while it was removed in the left photo.
 :::