-
Notifications
You must be signed in to change notification settings - Fork 109
Deployment Guide
lthursdayl edited this page Apr 29, 2015
·
14 revisions
**Note: ** Everything in this deployment guide has worked well for us. This does not mean this is the only hardware that will work ! This is just meant as a complete guide to system provisioning and configuration that has worked for us at UCLA. Please experiment with other hardware and methods, then share what has worked for your OpenPTrack implementation or installation.
1. Tested Hardware 2. Network Configuration 3. Imager Mounting and Placement 4. Calibration in Practice 5. Imager Settings 6. Troubleshooting Deployment
If you are working with OpenPTrack v2, use this wiki instead.
- Time Synchronization
- Pre-Calibration Configuration
- Intrinsic Calibration
- Camera Network Calibration
- Person Tracking
- Object Tracking
- World Coordinate Settings
- Tips and Tricks
- Tested Hardware
- Network Configuration
- Imager Mounting and Placement
- Calibration in Practice
- Quick Start Example
- Imager Settings
- Manual Ground Plane
- Calibration Refinement
How to receive tracking data in:
Notes on contributing to OPT.