Getting zone/point/outline coordinates

[PiotrMachowski]

Since v2.1.0 there is a simplified way to get coordinates for selection:

Documentation

Getting selection before v2.1.0

To get coordinates of zone, point or outline you have to:

1. Select appropriate mode:

   • zone => Zones (template: vacuum_clean_zone)
   • point => Manual Point (template: vacuum_goto)
   • outline => Path (template: vacuum_follow_path)

   If your platform doesn't support these templates (e.g. Neato) you can temporarily switch to default

2. Mark desired shape/point on the map

3. Press "play" button and hold it for ~1s
   

4. A popup containing coordinates should be shown
   

5. If popup doesn't appear you can enable debug mode by adding debug: true to card's configuration

6. If content of popup is cropped or you can't copy it, you can view coordinates in browser's console

   popup:	console:

[MrHollowPS]

Awesome, thanks for this.

[bfg100k]

Dumb question - are the coordinates [x1,y1,x2,y2] or [x1,x2,y1,y2]? I suspect its the former and also x1,y1 being the top left point and x2,y2 being the bottom right point?

[PiotrMachowski]

They are [x1,y1,x2,y2]. x1 and y1 are ones with smaller values from [x1, x2] and [y1, y2] pairs respectively