Possible to add a bond interface ?

[Trikke76]

Hi,

Thx for the great add on for zabbix, however i have a few questions:

We have on our servers a bond interface with 2 or more network cards
is it possible to list them all to the switch like one connection ?

between switches we have redundant lines. is it possible to show both paths between switches ?

Thx in advance
Patrik

[Prototype-X]

Hi,

1. This pull request add new feature (+). Example:
   link-1:
node1: node-Router
node2: node-Switch
name1: R1
name2: SW1
width: 15
hostname: Router
#itemin/itemout = item key
itemin: ifHCInOctets[ge-0/0/0]+ifHCInOctets[ge-0/0/1]
itemout: ifHCOutOctets[ge-0/0/0]+ifHCInOctets[ge-0/0/1]

2. If you draw both paths, then yes

P.S. Requriments Zabbix 3.4

[Trikke76]

awesome :)

thx 👍

[Trikke76]

It works but the only problem i see is that with both paths that the lines overlap each other.
it means i have to create 2 or more icons on the zabbix map for every interface.
or is it possible to create some kind of offset for the lines

[Prototype-X]

Ок, read this