v1 (do not use)

[joshua-8]

This is the first RCM version that I got manufactured. It was able to control motors and servos and allowed me to test https://github.com/RCMgames/RCMv2/releases/tag/v2.0.0 and https://github.com/joshua-8/TMC7300.

However, I tried to use the voltage regulator built into the ESP32 QT Py to get 3.3v from the sometimes over 6 volts of batteries. After a few minutes the regulator breaks and fries the QT Py. Check back soon for a v2 of this board, and also take a look at https://github.com/RCMgames/RCM-Hardware-Nibble

---

This discussion was created from the release v1 (do not use).

[joshua-8]

This project is also shared on PCB Way https://www.pcbway.com/project/shareproject/Robot_Control_Module_Advanced_V1_d66ca2a2.html

[joshua-8]