Update README.md

Author: joshua-8

README.md

@@ -35,7 +35,7 @@ Solder by hand to assemble your boards.
 | servo buck boost 5v 2A | [Pololu](https://www.pololu.com/product/4085) | 0 or 1 | if you want to supply voltages above or below what servos can accept (supplies other than 5AAs) |
 | esp32 buck 5v 0.6A | [Pololu](https://www.pololu.com/product/3792) | 0 or 1 | if you want to supply voltages above 7 volts or below 4.5 volts (supplies other than 5AAs |
 
-![image]
+![image](https://github.com/RCMgames/RCM-Hardware-V4/blob/67813489e1e16a104faf787c31854115694284c5/CAD%20renders/render%201.jpg)
 
 ## Acknowledgements
 * I would like to thank [PCBWay](https://www.pcbway.com/) for sponsoring prototyping runs of this project. PCBWay produces very nice boards, supports open source hardware, and gave me great support as I worked on this project. Special thanks to Liam!