Kura

Jump to bottom

Anthony Pauthonnier edited this page Jan 26, 2023 · 2 revisions

Kura

Accessing Kura

Accessing the gateway Kura web interface

After starting the gateway, you have to wait 4 min before being able to connect to Kura.

Default network configuration :

Ethernet (eth0) => DHCP client. WAN interface
WiFi (wlan0) => Access point and DHCP server. LAN interface. IP 172.16.1.1
SSID = Gateway serial number
Password: "testKEYS"
To access Kura you need a computer that is on a network that can reach the gateway directly (no NAT) then type in your browser:
Kura4 (until Solidsense 1.1a): http://<IP address or name>/kura
Kura5 (Solidsense 1.2 or higher): https://<IP address or hostname>
Default credential to access Kura: admin/admin

kura-login

Execute commands on the gateway via Kura

Device / Command / Execute, no password needed
kura-execute-command