arm: mvebu: clearfog_*_defconfig: enable fit image and read-only efuse

Enable support for booting FIT images requested by a customer.

Enable read-only efuse access with "fuse" command to allow internal
and customer testing of efuse state while preventing accidental changes.

Enable wget command for http downloads to improve general usability.

Signed-off-by: Josua Mayer <[email protected]>

Author: Josua-SR

configs/clearfog_defconfig

@@ -10,6 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
 CONFIG_TARGET_CLEARFOG=y
 CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
+CONFIG_MVEBU_EFUSE_READONLY=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
 CONFIG_SPL_TEXT_BASE=0x40000030
 CONFIG_SPL_SERIAL=y
@@ -21,6 +22,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -37,13 +39,15 @@ CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y
 CONFIG_SPL_CMD_TLV_EEPROM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_ENV_OVERWRITE=y
@@ -76,3 +80,5 @@ CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
+# CONFIG_SPL_SHA1 is not set
+# CONFIG_SPL_SHA256 is not set

configs/clearfog_sata_defconfig

@@ -10,6 +10,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
 CONFIG_TARGET_CLEARFOG=y
 CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA=y
+CONFIG_MVEBU_EFUSE_READONLY=y
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
 CONFIG_SPL_TEXT_BASE=0x40000030
 CONFIG_SPL_SERIAL=y
@@ -21,6 +22,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -37,13 +39,15 @@ CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y
 CONFIG_SPL_CMD_TLV_EEPROM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_ENV_OVERWRITE=y
@@ -77,3 +81,5 @@ CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
+# CONFIG_SPL_SHA1 is not set
+# CONFIG_SPL_SHA256 is not set

configs/clearfog_spi_defconfig

@@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
 CONFIG_TARGET_CLEARFOG=y
+CONFIG_MVEBU_EFUSE_READONLY=y
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
 CONFIG_SPL_TEXT_BASE=0x40000030
@@ -21,6 +22,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_FIT=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -37,13 +39,15 @@ CONFIG_SPL_I2C=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_TLV_EEPROM=y
 CONFIG_SPL_CMD_TLV_EEPROM=y
+CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_WGET=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_ENV_OVERWRITE=y
@@ -77,3 +81,5 @@ CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
+# CONFIG_SPL_SHA1 is not set
+# CONFIG_SPL_SHA256 is not set