Skip to content

Latest commit

 

History

History
49 lines (46 loc) · 1.7 KB

setup.md

File metadata and controls

49 lines (46 loc) · 1.7 KB

Windows

Remember to upgrade your WSL to Version 2 and install Ubuntu or similar usbipd list -> Remember the BUSID of the appropriate COM port usbipd bind -b <BUSID> -> Share the BUSID with the WSL Subsystem usbipd attach --auto-attach --busid <BUSID> --wsl -> permanently attach the BUSID to the WSL Subsystem

WSL2

  • Copy the Iceman Firmware Repo git clone https://github.com/RfidResearchGroup/proxmark3.git
  • Path to the fw cd ~/proxmark3
  • Install necessary prereqs for compiling the fw
- sudo apt-get install --no-install-recommends \
  git ca-certificates build-essential pkg-config \
  libreadline-dev gcc-arm-none-eabi libnewlib-dev \
  libbz2-dev liblz4-dev libpython3-dev qtbase5-dev \
  libssl-dev libgd-dev
  • Setup your makefile.platform sudo nano Makefile.platform
  • I know that my proxmark has external flash so i specified, if youre not sure just remove the line.
PLATFORM=PM3GENERIC
PLATFORM_EXTRAS=FLASH
# always ensure final line ends in line feed, or comment line
  • Next compile the fw with
- make clean
make -j
  • Make sure ls -lFA /dev/ttyACM* returns something like crw-rw---- 1 root dialout 166, 0 Feb 1 17:06 /dev/ttyACM0
  • Next set all perms
sudo make accessrights
sudo make udev
  • And restart everything because WSL 2 is a weird one sometimes
sudo service udev restart
sudo udevadm trigger --action=change

  • Check if a symbolic link has been made with ls -lFA /dev/ttyACM* /dev/pm3* it should output something like lrwxrwxrwx 1 root root 7 Feb 1 17:06 /dev/pm3-0 -> ttyACM0 crw-rw---- 1 root dialout 166, 0 Feb 1 17:22 /dev/ttyACM0

  • Now only thing left is to flash your pm3 with

./pm3-flash-all
  • run ./pm3 and youre done.