Tufte-book consistently makes errors in page parity and captioning in margins #144
Comments
|
Dear David,
Have you tried using either of the commands \forceversofloat or \forcerectofloat?
For details see p. 25 of the sample-book.
Cheers,
Dan
… On 29 Apr 2019, at 21:39, DavidGStork ***@***.***> wrote:
I'm writing a large book in Tufte ($\LaTeX$)
\documentclass[twoside,symmetric]{tufte-book}
and consistently get page parity problems... mixing even and odd, and putting figure captions on the wrong side or moving the whole figure and caption, as shown here:
TufteBookProblem.pdf <https://github.com/Tufte-LaTeX/tufte-latex/files/3129880/TufteBookProblem.pdf>
I'm now certain this is a bug and really hope someone can fix it!
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub <#144>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACXTUHDIFG65ULTNGZ2MKK3PS65QHANCNFSM4HJII5LQ>.
|
|
Dan,
Thanks for your suggestion. I just learned about those commands this
morning and I will try them later today.
As I understand them they should allow me to force a figure to "think" it
is on an even or an odd page, and presumably be typeset properly. However,
I will be editing my book many many times, so each figure will sometimes be
on an even page, sometimes on an odd page, and I certainly don't want to
have to go through the entire book (500 pages!) each time and hand-force
each figure into the proper page parity. I think the tufte-book.sty should
be fixed once and for all.
I'll try, though, and let you know how things progress.
Thanks again.
…--David G. Stork
On Tue, Apr 30, 2019 at 11:58 AM Dan T. Abell <[email protected]>
wrote:
Dear David,
Have you tried using either of the commands \forceversofloat or
\forcerectofloat?
For details see p. 25 of the sample-book.
Cheers,
Dan
> On 29 Apr 2019, at 21:39, DavidGStork ***@***.***> wrote:
>
> I'm writing a large book in Tufte ($\LaTeX$)
>
> \documentclass[twoside,symmetric]{tufte-book}
>
> and consistently get page parity problems... mixing even and odd, and
putting figure captions on the wrong side or moving the whole figure and
caption, as shown here:
>
> TufteBookProblem.pdf <
https://github.com/Tufte-LaTeX/tufte-latex/files/3129880/TufteBookProblem.pdf
>
> I'm now certain this is a bug and really hope someone can fix it!
>
> —
> You are receiving this because you are subscribed to this thread.
> Reply to this email directly, view it on GitHub <
#144>, or mute the
thread <
https://github.com/notifications/unsubscribe-auth/ACXTUHDIFG65ULTNGZ2MKK3PS65QHANCNFSM4HJII5LQ
>.
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#144 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AL6OIS5FXJQA4A3LNGAT5ITPTCJFRANCNFSM4HJII5LQ>
.
|
|
Dear David,
Let us know how the commands work for you.
Interacting with the LaTeX float mechanism is challenging, hence
the need for the \force*float commands. I'm not even sure that
“fixing tufte-book.sty” is really doable in the sense you and all
other fans of Tufte-LaTeX desire. (How I would love to be proved
wrong!)
It is perfectly understandable that you do not want to sort through
500 some pages to hand-force each figure. Please don't. The Tao
of LaTeX (as you surely know) is to insert formatting tweaks on
the last pass. Yes, you have to ignore those misplaced captions,
but think of it as an opportunity to practice your Zen. ;-)
I tend to tweak the formatting on a chapter-by-chapter basis.
This does not work well if your chapters begin sometimes on
a recto page and sometimes on a verso. Some people solve this
problem with a \cleardoublepage, or \clearemptydoublepage,
to force all chapters to begin on a recto page. This works nicely
if one uses the twoside option (as you do) and wants to hand
out printed copies of a single chapter. The drawback, of course,
is that you sometimes have a big gleaming blank page of wasted
space staring out at you from some of your double-page spreads.
You may have noticed that in most of Tufte’s self-published books
(the exception is VDQI) every single chapter opens on a double-
page spread, and every single chapter closes on a non-empty
double-page spread. This did not happen by chance! Have a
look through his chapters, and you will see that some spreads
run short or long compared to others. That and, I assume, some
artful adjustment to figure sizes enables Tufte to eliminate those
gleaming blank pages. I imagine that Tufte will even rewrite a
sentence or a paragraph to achieve his aim—as long as said
rewrite improves both textual and visual presentations.
To mimic what Tufte does, you can use the commands
\enlargethispage{\baselineskip}
and
\enlargethispage{-\baselineskip}
to increase or decrease the number of lines on a page. But, as
with the \force*float commands, you should postpone such
tweaks until your last pass through a given chapter.
Cheers,
Dan
… On 30 Apr 2019, at 13:15, DavidGStork ***@***.***> wrote:
Dan,
Thanks for your suggestion. I just learned about those commands this
morning and I will try them later today.
As I understand them they should allow me to force a figure to "think" it
is on an even or an odd page, and presumably be typeset properly. However,
I will be editing my book many many times, so each figure will sometimes be
on an even page, sometimes on an odd page, and I certainly don't want to
have to go through the entire book (500 pages!) each time and hand-force
each figure into the proper page parity. I think the tufte-book.sty should
be fixed once and for all.
I'll try, though, and let you know how things progress.
Thanks again.
--David G. Stork
On Tue, Apr 30, 2019 at 11:58 AM Dan T. Abell ***@***.***>
wrote:
> Dear David,
>
> Have you tried using either of the commands \forceversofloat or
> \forcerectofloat?
> For details see p. 25 of the sample-book.
>
> Cheers,
> Dan
>
>
> > On 29 Apr 2019, at 21:39, DavidGStork ***@***.***> wrote:
> >
> > I'm writing a large book in Tufte ($\LaTeX$)
> >
> > \documentclass[twoside,symmetric]{tufte-book}
> >
> > and consistently get page parity problems... mixing even and odd, and
> putting figure captions on the wrong side or moving the whole figure and
> caption, as shown here:
> >
> > TufteBookProblem.pdf <
> https://github.com/Tufte-LaTeX/tufte-latex/files/3129880/TufteBookProblem.pdf
> >
> > I'm now certain this is a bug and really hope someone can fix it!
> >
> > —
> > You are receiving this because you are subscribed to this thread.
> > Reply to this email directly, view it on GitHub <
> #144>, or mute the
> thread <
> https://github.com/notifications/unsubscribe-auth/ACXTUHDIFG65ULTNGZ2MKK3PS65QHANCNFSM4HJII5LQ
> >.
> >
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#144 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AL6OIS5FXJQA4A3LNGAT5ITPTCJFRANCNFSM4HJII5LQ>
> .
>
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub <#144 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ACXTUHFPAJWIPJG7MIUHTKDPTCLELANCNFSM4HJII5LQ>.
|
|
Dan,
Each chapter begins on the right-hand page, so indeed each tweaking is
chapter-by-chapter—a bit simpler than the general case.
I'll get back to you later today or tomorrow after I test the proposed hack.
I do think, though, that there is a fundamental error in tufte-book.sty.
I've written several thousand pages of LaTeX, including a best-selling
textbook
<https://www.amazon.com/Pattern-Classification-Pt-1-Richard-Duda/dp/0471056693/ref=sr_1_1?keywords=duda+hart+stork&qid=1556660072&s=gateway&sr=8-1>
and its 450-page dense *Solution Manual*, and am comfortable tweaking
pages, page breaks and such. Tufte-book is fundamentally different.
"Tweaks" cannot fix the layout problems. I'm honestly worried that there
is simply no "tweak" that forces some figures to have the proper page
parity, to extend to the proper column width, and so on. (One of the
posters on tex.stackexchange concluded that there are fundamental bugs in
Tufte-book.)
Oh... I can send you a single chapter, if you'd like to see how complicated
it all gets. (But be forewarned: each chapter is about 50 Mbytes!).
…--David Stork
On Tue, Apr 30, 2019 at 2:18 PM Dan T. Abell <[email protected]>
wrote:
Dear David,
Let us know how the commands work for you.
Interacting with the LaTeX float mechanism is challenging, hence
the need for the \force*float commands. I'm not even sure that
“fixing tufte-book.sty” is really doable in the sense you and all
other fans of Tufte-LaTeX desire. (How I would love to be proved
wrong!)
It is perfectly understandable that you do not want to sort through
500 some pages to hand-force each figure. Please don't. The Tao
of LaTeX (as you surely know) is to insert formatting tweaks on
the last pass. Yes, you have to ignore those misplaced captions,
but think of it as an opportunity to practice your Zen. ;-)
I tend to tweak the formatting on a chapter-by-chapter basis.
This does not work well if your chapters begin sometimes on
a recto page and sometimes on a verso. Some people solve this
problem with a \cleardoublepage, or \clearemptydoublepage,
to force all chapters to begin on a recto page. This works nicely
if one uses the twoside option (as you do) and wants to hand
out printed copies of a single chapter. The drawback, of course,
is that you sometimes have a big gleaming blank page of wasted
space staring out at you from some of your double-page spreads.
You may have noticed that in most of Tufte’s self-published books
(the exception is VDQI) every single chapter opens on a double-
page spread, and every single chapter closes on a non-empty
double-page spread. This did not happen by chance! Have a
look through his chapters, and you will see that some spreads
run short or long compared to others. That and, I assume, some
artful adjustment to figure sizes enables Tufte to eliminate those
gleaming blank pages. I imagine that Tufte will even rewrite a
sentence or a paragraph to achieve his aim—as long as said
rewrite improves both textual and visual presentations.
To mimic what Tufte does, you can use the commands
\enlargethispage{\baselineskip}
and
\enlargethispage{-\baselineskip}
to increase or decrease the number of lines on a page. But, as
with the \force*float commands, you should postpone such
tweaks until your last pass through a given chapter.
Cheers,
Dan
> On 30 Apr 2019, at 13:15, DavidGStork ***@***.***> wrote:
>
> Dan,
>
> Thanks for your suggestion. I just learned about those commands this
> morning and I will try them later today.
>
> As I understand them they should allow me to force a figure to "think" it
> is on an even or an odd page, and presumably be typeset properly.
However,
> I will be editing my book many many times, so each figure will sometimes
be
> on an even page, sometimes on an odd page, and I certainly don't want to
> have to go through the entire book (500 pages!) each time and hand-force
> each figure into the proper page parity. I think the tufte-book.sty
should
> be fixed once and for all.
>
> I'll try, though, and let you know how things progress.
>
> Thanks again.
>
> --David G. Stork
>
> On Tue, Apr 30, 2019 at 11:58 AM Dan T. Abell ***@***.***>
> wrote:
>
> > Dear David,
> >
> > Have you tried using either of the commands \forceversofloat or
> > \forcerectofloat?
> > For details see p. 25 of the sample-book.
> >
> > Cheers,
> > Dan
> >
> >
> > > On 29 Apr 2019, at 21:39, DavidGStork ***@***.***>
wrote:
> > >
> > > I'm writing a large book in Tufte ($\LaTeX$)
> > >
> > > \documentclass[twoside,symmetric]{tufte-book}
> > >
> > > and consistently get page parity problems... mixing even and odd, and
> > putting figure captions on the wrong side or moving the whole figure
and
> > caption, as shown here:
> > >
> > > TufteBookProblem.pdf <
> >
https://github.com/Tufte-LaTeX/tufte-latex/files/3129880/TufteBookProblem.pdf
> > >
> > > I'm now certain this is a bug and really hope someone can fix it!
> > >
> > > —
> > > You are receiving this because you are subscribed to this thread.
> > > Reply to this email directly, view it on GitHub <
> > #144>, or mute the
> > thread <
> >
https://github.com/notifications/unsubscribe-auth/ACXTUHDIFG65ULTNGZ2MKK3PS65QHANCNFSM4HJII5LQ
> > >.
> > >
> >
> > —
> > You are receiving this because you authored the thread.
> > Reply to this email directly, view it on GitHub
> > <
#144 (comment)
>,
> > or mute the thread
> > <
https://github.com/notifications/unsubscribe-auth/AL6OIS5FXJQA4A3LNGAT5ITPTCJFRANCNFSM4HJII5LQ
>
> > .
> >
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub <
#144 (comment)>,
or mute the thread <
https://github.com/notifications/unsubscribe-auth/ACXTUHFPAJWIPJG7MIUHTKDPTCLELANCNFSM4HJII5LQ
>.
>
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#144 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AL6OISZ6QXZXTQUSHVT2OQTPTCZS5ANCNFSM4HJII5LQ>
.
|
|
Dan,
I confirmed that \forceversofloat works as advertised. A very valuable
option.... thanks for pointing it out.
However this is not a fully satisfactory solution because I set
\forceversofloat and \forcerectofloat, as appropriate, but later when I add
more text, some of the figures get pushed to new pages and must have this
command switched.
Isn't there a way to have an even-versus-odd page identity implement the
appropriate command?
Or really: Isn't there a way to fix the Tufte-book.sty file so this
problem never arrives in the first place?
…--David
On Tue, Apr 30, 2019 at 2:40 PM David Stork ***@***.***> wrote:
Dan,
Each chapter begins on the right-hand page, so indeed each tweaking is
chapter-by-chapter—a bit simpler than the general case.
I'll get back to you later today or tomorrow after I test the proposed
hack.
I do think, though, that there is a fundamental error in tufte-book.sty.
I've written several thousand pages of LaTeX, including a best-selling
textbook
<https://www.amazon.com/Pattern-Classification-Pt-1-Richard-Duda/dp/0471056693/ref=sr_1_1?keywords=duda+hart+stork&qid=1556660072&s=gateway&sr=8-1>
and its 450-page dense *Solution Manual*, and am comfortable tweaking
pages, page breaks and such. Tufte-book is fundamentally different.
"Tweaks" cannot fix the layout problems. I'm honestly worried that there
is simply no "tweak" that forces some figures to have the proper page
parity, to extend to the proper column width, and so on. (One of the
posters on tex.stackexchange concluded that there are fundamental bugs in
Tufte-book.)
Oh... I can send you a single chapter, if you'd like to see how
complicated it all gets. (But be forewarned: each chapter is about 50
Mbytes!).
--David Stork
On Tue, Apr 30, 2019 at 2:18 PM Dan T. Abell ***@***.***>
wrote:
> Dear David,
>
> Let us know how the commands work for you.
>
> Interacting with the LaTeX float mechanism is challenging, hence
> the need for the \force*float commands. I'm not even sure that
> “fixing tufte-book.sty” is really doable in the sense you and all
> other fans of Tufte-LaTeX desire. (How I would love to be proved
> wrong!)
>
> It is perfectly understandable that you do not want to sort through
> 500 some pages to hand-force each figure. Please don't. The Tao
> of LaTeX (as you surely know) is to insert formatting tweaks on
> the last pass. Yes, you have to ignore those misplaced captions,
> but think of it as an opportunity to practice your Zen. ;-)
>
> I tend to tweak the formatting on a chapter-by-chapter basis.
> This does not work well if your chapters begin sometimes on
> a recto page and sometimes on a verso. Some people solve this
> problem with a \cleardoublepage, or \clearemptydoublepage,
> to force all chapters to begin on a recto page. This works nicely
> if one uses the twoside option (as you do) and wants to hand
> out printed copies of a single chapter. The drawback, of course,
> is that you sometimes have a big gleaming blank page of wasted
> space staring out at you from some of your double-page spreads.
>
> You may have noticed that in most of Tufte’s self-published books
> (the exception is VDQI) every single chapter opens on a double-
> page spread, and every single chapter closes on a non-empty
> double-page spread. This did not happen by chance! Have a
> look through his chapters, and you will see that some spreads
> run short or long compared to others. That and, I assume, some
> artful adjustment to figure sizes enables Tufte to eliminate those
> gleaming blank pages. I imagine that Tufte will even rewrite a
> sentence or a paragraph to achieve his aim—as long as said
> rewrite improves both textual and visual presentations.
>
> To mimic what Tufte does, you can use the commands
> \enlargethispage{\baselineskip}
> and
> \enlargethispage{-\baselineskip}
> to increase or decrease the number of lines on a page. But, as
> with the \force*float commands, you should postpone such
> tweaks until your last pass through a given chapter.
>
> Cheers,
> Dan
>
>
> > On 30 Apr 2019, at 13:15, DavidGStork ***@***.***> wrote:
> >
> > Dan,
> >
> > Thanks for your suggestion. I just learned about those commands this
> > morning and I will try them later today.
> >
> > As I understand them they should allow me to force a figure to "think"
> it
> > is on an even or an odd page, and presumably be typeset properly.
> However,
> > I will be editing my book many many times, so each figure will
> sometimes be
> > on an even page, sometimes on an odd page, and I certainly don't want to
> > have to go through the entire book (500 pages!) each time and hand-force
> > each figure into the proper page parity. I think the tufte-book.sty
> should
> > be fixed once and for all.
> >
> > I'll try, though, and let you know how things progress.
> >
> > Thanks again.
> >
> > --David G. Stork
> >
> > On Tue, Apr 30, 2019 at 11:58 AM Dan T. Abell ***@***.***
> >
> > wrote:
> >
> > > Dear David,
> > >
> > > Have you tried using either of the commands \forceversofloat or
> > > \forcerectofloat?
> > > For details see p. 25 of the sample-book.
> > >
> > > Cheers,
> > > Dan
> > >
> > >
> > > > On 29 Apr 2019, at 21:39, DavidGStork ***@***.***>
> wrote:
> > > >
> > > > I'm writing a large book in Tufte ($\LaTeX$)
> > > >
> > > > \documentclass[twoside,symmetric]{tufte-book}
> > > >
> > > > and consistently get page parity problems... mixing even and odd,
> and
> > > putting figure captions on the wrong side or moving the whole figure
> and
> > > caption, as shown here:
> > > >
> > > > TufteBookProblem.pdf <
> > >
> https://github.com/Tufte-LaTeX/tufte-latex/files/3129880/TufteBookProblem.pdf
> > > >
> > > > I'm now certain this is a bug and really hope someone can fix it!
> > > >
> > > > —
> > > > You are receiving this because you are subscribed to this thread.
> > > > Reply to this email directly, view it on GitHub <
> > > #144>, or mute the
> > > thread <
> > >
> https://github.com/notifications/unsubscribe-auth/ACXTUHDIFG65ULTNGZ2MKK3PS65QHANCNFSM4HJII5LQ
> > > >.
> > > >
> > >
> > > —
> > > You are receiving this because you authored the thread.
> > > Reply to this email directly, view it on GitHub
> > > <
> #144 (comment)
> >,
> > > or mute the thread
> > > <
> https://github.com/notifications/unsubscribe-auth/AL6OIS5FXJQA4A3LNGAT5ITPTCJFRANCNFSM4HJII5LQ
> >
> > > .
> > >
> > —
> > You are receiving this because you commented.
> > Reply to this email directly, view it on GitHub <
> #144 (comment)>,
> or mute the thread <
> https://github.com/notifications/unsubscribe-auth/ACXTUHFPAJWIPJG7MIUHTKDPTCLELANCNFSM4HJII5LQ
> >.
> >
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <#144 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AL6OISZ6QXZXTQUSHVT2OQTPTCZS5ANCNFSM4HJII5LQ>
> .
>
|
|
Put this immediately after your
You need to compile twice (maybe even thrice if your figures pile up) to get things right. |
|
Oh.... thanks so much! This works!
…--David Stork
On Thu, Aug 13, 2020 at 1:51 AM Daniel-Dane ***@***.***> wrote:
Put this immediately after your \begin{figure} and \begin{table}:
\checkoddpage \ifoddpage \forcerectofloat \else \forceversofloat \fi
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#144 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AL6OISZNPZSIMVTUIOHGIMLSAOSQTANCNFSM4HJII5LQ>
.
|
|
Thank you for this solution. It saved my day! |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I'm writing a large book in Tufte (LaTeX) in TeXShop on a Mac (OS 10.12.6 Sierra)
and consistently get page parity problems... mixing even and odd, and putting figure captions on the wrong side or moving the whole figure and caption, as shown here:
TufteBookProblem.pdf
I'm now certain this is a bug and really hope someone can fix the tufte-book style file!
The text was updated successfully, but these errors were encountered: