Netstat Command

The netstat command displays various network-related information, such as network connections, routing tables, interface statistics, masqueraded connections, multicast member identities, and more.

Syntax

netstat [address_family_options] [--tcp|-t] [--udp|-u] [--raw|-w] 
        [--listening|-l] [--all|-a] [--numeric|-n] [--numeric-hosts] 
        [--numeric-ports] [--numeric-users] [--symbolic|-N] 
        [--extend|-e[--extend|-e]] [--timers|-o] [--program|-p] 
        [--verbose|-v] [--continuous|-c]

netstat {--route|-r} [address_family_options] [--extend|-e[--extend|-e]] 
        [--verbose|-v] [--numeric|-n] [--numeric-hosts] [--numeric-ports] 
        [--numeric-users] [--continuous|-c]
        
netstat {--interfaces|-i} [--all|-a] [--extend|-e[--extend|-e]] [--verbose|-v] 
        [--program|-p] [--numeric|-n] [--numeric-hosts] [--numeric-ports] 
        [--numeric-users] [--continuous|-c]

netstat {--groups|-g} [--numeric|-n] [--numeric-hosts] [--numeric-ports] 
        [--numeric-users] [--continuous|-c]
        
netstat {--masquerade|-M} [--extend|-e] [--numeric|-n] [--numeric-hosts] 
        [--numeric-ports] [--numeric-users] [--continuous|-c]
        
netstat {--statistics|-s} [--tcp|-t] [--udp|-u] [--raw|-w]

netstat {--version|-V}

netstat {--help|-h}

address_family_options may be any combination of the following options: 
[-4] [-6] [--protocol={inet,unix,ipx,ax25,netrom,ddp}[,...]] [--unix|-x] 
[--inet|--ip] [--ax25] [--ipx] [--netrom] [--ddp]

Parameters

The type of information printed by netstat is controlled by the first parameter, which can be one of the following:

(none): By default, netstat displays the list of open sockets. If no address family is specified, it prints the active sockets of all configured address families.
--route, -r: Displays the kernel routing table, similar to the output of netstat -r and route -e.
--groups, -g: Shows the membership information of multicast groups for IPv4 and IPv6.
--interfaces, -i: Displays a table of all network interfaces.
--masquerade, -M: Shows the list of masqueraded connections.
--statistics, -s: Displays summary statistics for each protocol.

Following the first parameter, the following options specify the reporting behavior of netstat:

--verbose, -v: Tells the user what has happened in detail, especially printing some useful information about unconfigured address families.
--wide, -W: Uses the specified width without truncating the IP address based on the output, this is optional to avoid breaking existing scripts.
--numeric, -n: Displays numerical addresses rather than attempting to determine symbolic host, port, or user names.
--numeric-hosts: Displays numerical host addresses, but does not affect the resolution of ports or usernames.
--numeric-ports: Shows numerical port numbers, but does not affect the resolution of host or username.
--numeric-users: Displays numerical user IDs, but does not affect the resolution of host or port names.
--protocol=family, -A: Specifies the address family (low-level protocol) to display its connections, which is a comma-separated list of address family keywords, such as inet, unix, ipx, ax25, netrom, and ddp, which has the same effect as using the --inet, -unix(-x), -ipx, -ax25, -netrom, and --ddp options. The inet family includes raw, udp, and tcp protocol sockets.
-c, --continuous: Causes netstat to print the selected information continuously every second.
-e, --extend: Displays additional information, use this option twice for maximal detail.
-o, --timers: Includes information related to network timers.
-p, --program: Shows the process identifier PID and the name of the program owning each socket.
-l, --listening: Only shows listening sockets, which are omitted by default.
-a, --all: Shows both listening and non-listening sockets, displays interfaces that are not currently enabled using the --interfaces option.
-F: Prints route information from the FIB, which is the default setting.
-C: Prints route information from the routing cache.

Network Connection

Information about active internet connections for TCP, UDP, raw falls into the following categories:

Proto: The protocol tcp, udp, raw used by the socket.
Recv-Q: The number of bytes not copied by the user program connected to this socket.
Send-Q: The number of bytes not acknowledged by the remote host.
Local Address: The local address and port number of the socket, unless the --numeric, -n option is specified, in which case the socket address will be resolved to its canonical host name FQDN, and the port number will be converted to the corresponding service name.
Foreign Address: The remote address and port number of the socket, similar to the local address.
State: The state of the socket, this column can be left blank since there is no state in raw sockets, and states are usually not used in UDP. This could typically be one of the following values, which TCP generally goes through during handshaking and closing:
- ESTABLISHED: The socket has an established connection.
- SYN_SENT: The socket is actively attempting to establish a connection.
- SYN_RECV: A connection request has been received from the network.
- FIN_WAIT1: The socket has closed; the connection is closing.
- FIN_WAIT2: The connection has been closed; the socket is waiting for the remote to close.
- TIME_WAIT: The socket is waiting after close to handle packets still in the network.
- CLOSE: The socket is not being used.
- CLOSE_WAIT: The remote has closed; waiting for the socket to close.
- LAST_ACK: The remote has closed, and the socket has been closed, waiting for acknowledgement.
- LISTEN: The socket is listening for incoming connections, unless specified with the --listening, -l or --all, -a options, these sockets are not included in the output.
- CLOSING: Both sockets are closed, but we still have not sent all the data.
- UNKNOWN: The status of the socket is unknown.
User: The username or User ID(UID) of the socket owner.
PID/Program name: The PID of the process and the process name of the program owning the socket, separated by a forward slash. Including this column requires superuser privileges to view this information on sockets not owned. This identification information is not applicable to IPX sockets yet.

UNIX Domain Sockets

Information about active UNIX domain sockets falls into the following categories:

Proto: The protocol used by the socket, usually unix.
RefCnt: Reference count, indicating the processes connected through this socket.
Flags: The displayed flags show SO_ACCEPTON as ACC, SO_WAITDATA(W) or SO_NOSPACE(N), and if the respective process for an unconnected socket is waiting for connection requests, SO_ACCEPTON is used on the unconnected socket. Other flags are not a normal concern.
Type: There are several types of socket access:
- SOCK_DGRAM: The socket is used in datagram (connectionless) mode.
- SOCK_STREAM: This is a stream (connection) socket.
- SOCK_RAW: This socket is used as a raw socket.
- SOCK_RDM: This service provides reliable message delivery.
- SOCK_SEQPACKET: This is a sequential packet socket.
- SOCK_PACKET: Raw interface access socket.
State: This field will contain one of the following keywords:
- FREE: Unallocated socket.
- LISTENING: The socket is listening for connection requests and will only be included in the output when the --listening, -l or --all, -a options are specified.
- CONNECTING: The socket is about to establish a connection.
- CONNECTED: The socket is connected.
- DISCONNECTING: The socket is disconnecting.
- (empty): The socket is not connected to another socket.
PID/Program name: Process ID (PID) and process name of the process opening the socket.
Path: This is the pathname attached to the socket by the corresponding process.
Active IPX sockets: List of active IPX sockets.
Active NET/ROM sockets: List of active NET/ROM sockets.
Active AX.25 sockets: List of active AX.25 sockets.

Files

netstat uses the following files:

/etc/services: Service translation file.
/proc: Mount point of the proc file system, providing access to kernel status information in a hierarchical file structure form.
/proc/net/dev: Device information file.
/proc/net/raw: Raw socket information.
/proc/net/tcp: TCP socket information.
/proc/net/udp: UDP socket information.
/proc/net/igmp: IGMP multicast information.
/proc/net/unix: Unix domain socket information.
/proc/net/ipx: IPX socket information.
/proc/net/ax25: AX25 socket information.
/proc/net/appletalk: DDP(appletalk) socket information
/proc/net/nr: NET/ROM socket information.
/proc/net/route: IP route information.
/proc/net/ax25_route: AX25 route information.
/proc/net/ipx_route: IPX route information.
/proc/net/nr_nodes: NET/ROM node list.
/proc/net/nr_neigh: NET/ROM neighbors.
/proc/net/ip_masquerade: Masqueraded connections.
/proc/net/snmp: Statistics.

Examples

Display all listening and non-listening sockets, and use piping and less for convenient viewing of the current status.

netstat -a | less

List all TCP ports.

netstat -at

List all UDP ports.

netstat -au

List only the listening ports.

netstat -l

List statistics for all ports.

netstat -s | less

Display the PID and program names using TCP.

netstat -pt

Get kernel routing information.

netstat -r

Retrieve network information related to ssh processes.

netstat -ap | grep ssh

Get network status information for port 80.

netstat -anp | grep :80

Retrieve a list of network interfaces.

netstat -i

Retrieve a list of network interfaces with extended information.

netstat -ie

Get the statistical information of the state of TCP sockets using the awk command.

netstat -ant|awk '/^tcp/ {++S[$NF]} END {for(a in S) print (a,S[a])}'

Daily Question

https://github.com/WindrunnerMax/EveryDay

References

https://www.computerhope.com/unix/unetstat.htm
https://www.runoob.com/linux/linux-comm-netstat.html
https://www.geeksforgeeks.org/netstat-command-linux/

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

netstat-网络状态管理.md

netstat-网络状态管理.md

Netstat Command

Syntax

Parameters

Network Connection

UNIX Domain Sockets

Files

Examples

Daily Question

References

Files

netstat-网络状态管理.md

Latest commit

History

netstat-网络状态管理.md

File metadata and controls

Netstat Command

Syntax

Parameters

Network Connection

UNIX Domain Sockets

Files

Examples

Daily Question

References