ONVIF Motion detection Event problem

[powerfrontier]

I'm new to ZoneMinder and I'm trying to setup my ONVIF IP camera. It gets discovered and I get the feed ok, but I get problems when I try to enable the ONVIF motion detection events. I enabled the debug log an this is what I get:

07/24/25 18:59:12.611505 zmc_m1[2385251].DB1-zm_monitor_onvif.cpp/50 [Tearing Down Onvif]
07/24/25 18:59:12.611635 zmc_m1[2385251].DB1-zm_monitor_onvif.cpp/55 [ONVIF Alarms Cleared: Alarms count is 0, alarmed is false]
07/24/25 18:59:12.615048 zmc_m1[2385251].DB1-zm_monitor_onvif.cpp/96 [ONVIF Endpoint: http://192.168.1.122:8080/onvif/device_service/Events]
07/24/25 18:59:12.629392 zmc_m1[2385251].DB1-zm_monitor_onvif.cpp/146 [ONVIF :soap_wsa_request  OK ]
07/24/25 18:59:12.631697 zmc_m1[2385251].ERR-zm_monitor_onvif.cpp/150 [Couldn't do initial event pull! Error 28 No address associated with hostname, getaddrinfo failed in tcp_connect(
)]
07/24/25 18:59:12.632099 zmc_m1[2385251].DB1-zm_monitor_onvif.cpp/166 [ONVIF :soap_wsa_request OK]
07/24/25 18:59:12.634289 zmc_m1[2385251].ERR-zm_monitor_onvif.cpp/168 [ONVIF Couldn't do initial Renew ! Error 28 No address associated with hostname, getaddrinfo failed in tcp_connec
t()]

I'm using the last Raspbian OS on a raspberry pi 4. I installed ZoneMinder from the zmrepo and its version is 1.37.68.
The camera is a generic ip camera, the only info I get on its admin web interface is C6F0SeZ0N0P0L0

If you need more info to trace the problem let me know. Thanks

[welcome]

Thanks for opening your first issue here! Just a reminder, this forum is for Bug Reports only. Be sure to follow the issue template!

[connortechnology]

THe error is strange as you have given it an ip address, not a hostname. No hostname lookup should be required.