setup_environment

# see README before running this

ps -p $$ | awk '/bash/ || / sh/ || /zsh/ {exit 1;}' && echo "WARNING ** source setup_environment must be run in a bash, zsh or sh shell; see README"

export GPGPUSIM_SETUP_ENVIRONMENT_WAS_RUN=
export GPGPUSIM_ROOT="$( cd "$( dirname "$BASH_SOURCE" )" && pwd )"

GPGPUSIM_VERSION_STRING=`cat $GPGPUSIM_ROOT/version | awk '/Version/ {print $8}'`
#Detect Git branch and commit #
GIT_COMMIT=`git --git-dir=$GPGPUSIM_ROOT/.git log --abbrev-commit -n 1 | head -1 | sed -re 's/commit (.*)/\1/'`
GIT_FILES_CHANGED=`git --git-dir=$GPGPUSIM_ROOT/.git diff --numstat | wc | sed -re 's/^\s+([0-9]+).*/\1./'`
GIT_FILES_CHANGED+=`git --git-dir=$GPGPUSIM_ROOT/.git diff --numstat --cached | wc | sed -re 's/^\s+([0-9]+).*/\1/'`
GPGPUSIM_BUILD_STRING="gpgpu-sim_git-commit-$GIT_COMMIT-modified_$GIT_FILES_CHANGED"

echo -n "GPGPU-Sim version $GPGPUSIM_VERSION_STRING (build $GPGPUSIM_BUILD_STRING) ";

if [ ! -n "$CUDA_INSTALL_PATH" ]; then
	echo "ERROR ** Install CUDA Toolkit and set CUDA_INSTALL_PATH.";
	return 1;
fi

if [ ! -d "$CUDA_INSTALL_PATH" ]; then
	echo "ERROR ** CUDA_INSTALL_PATH=$CUDA_INSTALL_PATH invalid (directory does not exist)";
	return 1;
fi

if [ ! `uname` = "Linux" -a  ! `uname` = "Darwin" ]; then
	echo "ERROR ** Unsupported platform: GPGPU-Sim $GPGPUSIM_VERSION_STRING developed and tested on Linux."
	return 1;
fi

export PATH=`echo $PATH | sed "s#$GPGPUSIM_ROOT/bin:$CUDA_INSTALL_PATH/bin:##"`
export PATH=$GPGPUSIM_ROOT/bin:$CUDA_INSTALL_PATH/bin:$PATH

# to run the debug build of GPGPU-Sim run:
# source setup_environment debug
NVCC_PATH=`which nvcc`;
if [ $? = 1 ]; then
	echo "";
	echo "ERROR ** nvcc (from CUDA Toolkit) was not found in PATH but required to build GPGPU-Sim.";
	echo "         Try adding $CUDA_INSTALL_PATH/bin/ to your PATH environment variable.";
	echo "         Please also be sure to read the README file if you have not done so.";
	echo "";
	return 1;
fi

CC_VERSION=$(gcc --version | head -1 | awk '{for(i=1;i<=NF;i++){ if(match($i,/^[0-9]+\.[0-9]+\.[0-9]+$/)) {print $i; exit 0}}}')


CUDA_VERSION_STRING=`$CUDA_INSTALL_PATH/bin/nvcc --version | awk '/release/ {print $5;}' | sed 's/,//'`;
export CUDA_VERSION_NUMBER=`echo $CUDA_VERSION_STRING | sed 's/\./ /' | awk '{printf("%02u%02u", 10*int($1), 10*$2);}'`
if [ $CUDA_VERSION_NUMBER -gt 11100 -o $CUDA_VERSION_NUMBER -lt 2030  ]; then
	echo "ERROR ** GPGPU-Sim version $GPGPUSIM_VERSION_STRING not tested with CUDA version $CUDA_VERSION_STRING (please see README)";
	echo $CUDA_VERSION_NUMBER
    return 1;
fi

if [ $CUDA_VERSION_NUMBER -ge 6000 ]; then
	export PTX_SIM_USE_PTX_FILE=1.ptx
	export PTX_SIM_KERNELFILE=_1.ptx
	export CUOBJDUMP_SIM_FILE=jj
fi


if [ $# = '1' ] ;
then
    export GPGPUSIM_CONFIG=gcc-$CC_VERSION/cuda-$CUDA_VERSION_NUMBER/$1
else
    export GPGPUSIM_CONFIG=gcc-$CC_VERSION/cuda-$CUDA_VERSION_NUMBER/release
fi

export QTINC=/usr/include

# change NVOPENCL_LIBDIR to point to your opencl library directory, usually
# /usr/lib or /usr/lib64. Not setting this variable will cause gpgpu-sim to
# build without opencl support.
if [ -f /usr/lib64/libOpenCL.so ]; then
	export NVOPENCL_LIBDIR=/usr/lib64;

	# change NVOPENCL_INCDIR to point to your opencl include directory.
	if [ -f /usr/include/CL/cl.h ]; then
		export NVOPENCL_INCDIR=/usr/include/;
	elif [ -f $CUDA_INSTALL_PATH/include/CL/cl.h ]; then
		export NVOPENCL_INCDIR=$CUDA_INSTALL_PATH/include/;
	fi
fi

# setting LD_LIBRARY_PATH as follows enables GPGPU-Sim to be invoked by 
# native CUDA and OpenCL applications. GPGPU-Sim is dynamically linked
# against instead of the CUDA toolkit.  This replaces this cumbersome
# static link setup in prior GPGPU-Sim releases.
if [ `uname` = "Darwin" ]; then
	export DYLD_LIBRARY_PATH=`echo $DYLD_LIBRARY_PATH | sed -Ee 's#'$GPGPUSIM_ROOT'\/lib\/[0-9]+\/(debug|release):##'`
	export DYLD_LIBRARY_PATH=$GPGPUSIM_ROOT/lib/$GPGPUSIM_CONFIG:$DYLD_LIBRARY_PATH
else
	export LD_LIBRARY_PATH=`echo $LD_LIBRARY_PATH | sed -re 's#'$GPGPUSIM_ROOT'\/lib\/[0-9]+\/(debug|release):##'`
	export LD_LIBRARY_PATH=$GPGPUSIM_ROOT/lib/$GPGPUSIM_CONFIG:$LD_LIBRARY_PATH
fi


# The following sets OPENCL_REMOTE_GPU_HOST which is used by GPGPU-Sim to
# SSH to remote node to generate PTX for OpenCL kernels when running on 
# a node that does not have an NVIDIA driver installed.
# The remote node should have GPGPU-Sim installed at the same path 
if [ `uname` = "Darwin" ]; then
	HOSTNAME_PREFIX=`hostname -s`;
	export HOSTNAME_DOMAIN=`hostname | sed s/$HOSTNAME_PREFIX\.//`;
else
	HOSTNAME_DOMAIN=`hostname -d`
fi
if [ "x$HOSTNAME_DOMAIN" = "xece.ubc.ca" -a "$OPENCL_REMOTE_GPU_HOST" = "" ]; then
	export OPENCL_REMOTE_GPU_HOST=aamodt-pc05.ece.ubc.ca
fi
HOSTNAME_F=`hostname -f`
if [ "x$HOSTNAME_F" = "x$OPENCL_REMOTE_GPU_HOST" ]; then
	unset OPENCL_REMOTE_GPU_HOST
fi

# The following checks to see if the GPGPU-Sim power model is enabled.
# GPGPUSIM_POWER_MODEL points to the directory where gpgpusim_mcpat is located.
# If this is not set, it checks the default directory "$GPGPUSIM_ROOT/src/accelwattch/".
if [ -d $GPGPUSIM_ROOT/src/accelwattch/ ]; then
	if [ ! -f $GPGPUSIM_ROOT/src/accelwattch/gpgpu_sim.verify ]; then
		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/accelwattch";
		return 1;
	fi
	export GPGPUSIM_POWER_MODEL=$GPGPUSIM_ROOT/src/accelwattch/;
	echo "configured with AccelWattch.";
elif [ -n "$GPGPUSIM_POWER_MODEL" ]; then
	if [ ! -f $GPGPUSIM_POWER_MODEL/gpgpu_sim.verify ]; then
		echo "";
		echo "ERROR ** gpgpu_sim.verify not found in $GPGPUSIM_ROOT/src/accelwattch/ - Either incorrect directory or incorrect McPAT version";
		return 1;
	fi
	echo "configure with power model in $GPGPUSIM_POWER_MODEL.";
elif [ ! -d $GPGPUSIM_POWER_MODEL ]; then
		echo "";
		echo "ERROR ** GPGPUSIM_POWER_MODEL ($GPGPUSIM_POWER_MODEL) does not exist... Please set this to the gpgpusim_mcpat directory or unset this environment variable.";
		return 1;
else
	echo "configured without a power model.";
fi

if [ -z "$PTXAS_CUDA_INSTALL_PATH" ]; then
    export PTXAS_CUDA_INSTALL_PATH=$CUDA_INSTALL_PATH;
fi

# I am not sure PTXPlus really makes sense anymore and this verbose print to describe
# how to use it is probably not aging well. The info in here is good though if you care
# about PTXPlus, so I will leave it as a comment.
#
#echo "";
#echo "----------------------------------------------------------------------------";
#echo "INFO - If you only care about PTX execution or trace-based SASS execution, ignore this message."
#echo "If you want to run PTXPLUS (sm_1x SASS) with a modern card configuration - set the envronment variable"
#echo "\$PTXAS_CUDA_INSTALL_PATH to point a CUDA version compabible with your card configurations (i.e. 8+ for PASCAL, 9+ for VOLTA etc..)"
#echo "For example: \"export \$PTXAS_CUDA_INSTALL_PATH=/usr/local/cuda-9.1\""
#echo ""
#echo "The following text describes why:";
#echo "If you are using PTXPLUS, only sm_1x is supported and it requires that the app and simulator binaries are compiled in CUDA 4.2 or less.";
#echo "The simulator requires it since CUDA headers desribe struct sizes in the exec which change from gen to gen.";
#echo "The apps require 4.2 because new versions of CUDA tools have dropped parsing support for generating sm_1x";
#echo "When running using modern config (i.e. volta) and PTXPLUS with CUDA 4.2, the \$PTXAS_CUDA_INSTALL_PATH env variable is required to get proper register usage"
#echo "(and hence occupancy) using a version of CUDA that knows the register usage on the real card."
#echo "";
#echo "----------------------------------------------------------------------------";

echo "setup_environment succeeded";

export GPGPUSIM_SETUP_ENVIRONMENT_WAS_RUN=1