[fatal] No camera to make the reconstruction

[herrdeh]

After launch of Meshroom at console:

[warning] The camera found in the sensor database is slightly different for image(s):
[16:04:38.278371][warning] image: 'SDC10094.JPG'
	- image camera brand: SAMSUNG
	- image camera model: SAMSUNG ES15 / VLUU ES15 / SAMSUNG SL30
	- sensor database camera brand: Samsung
	- sensor database camera model: Samsung SL30
	- sensor database camera sensor width: 6.08 mm
[16:04:38.278394][warning] Please check and correct camera model(s) name in the sensor database.
[16:04:38.283149][info] CameraInit report:
	- # Views: 25
	   - # with focal length initialization (from metadata): 25
	   - # without metadata: 0
	   - # with DCP color calibration (raw images only): 0
	   - # with LCP lens distortion initialization: 0
	   - # with LCP vignetting calibration: 0
	   - # with LCP chromatic aberration correction models: 0
	- # Cameras Intrinsics: 1

Can / should I do this - or will maintainers do?

[natowi]

This should not be a fatal error, it usually is just for your information, so you verify that the correct information was detected, even if it was not a perfect match.

Could you try adding this to your local sensordb?

SAMSUNG;SAMSUNG ES15 / VLUU ES15 / SAMSUNG SL30;6.08;digicamdb,dpreview

Do you still get the message? If not, I´ll update the sensordb in the repository.

If you still get a "[[fatal] No camera to make the reconstruction", there may be another reason for that.

[herrdeh]

Thanks for taking care.
I can try to add to local DB. But how do I do that? - Manual does not mention this procedure.