pilight: ERROR. No handshake with pilight-daemon

[keram79]

I've updated both my fhem installation (fhem.pl 7116 2014-12-02 07:05:00Z) as well as pilight via github tosday.
pilight is configured to listen on port 5000, my previously configured port 5001 gave a completely different error.
Nor, whenever I try to execute a command defined in my fhem.cfg, fhem hangs for a while, ending in the following error message in fhem.log:
pilight: ERROR. No handshake with pilight-daemon. Received: >>><<<

pilight-send is working fine.

Any hint how to troubleshoot this is highly welcome.

[logi85]

Check my pull-request.

[ottowalkes]

Hallo,
i have the same problem. New Installation of FHEM, 98_pilight and Pilight. Pilight runs, but in FHEM allways the error "No Handshake....". Pilight runs on port 5000 and is reachabele. secound SD-Card and seven`s installation.

raspi with 8gb sd10

[andreas-fey]

@ottowalkes , have you tested the 98_pilight version from github?

[ottowalkes]

hallo,
after problem with wget i have copy the text of the file into a new 98_pilight.pm. since that the error is away, and the fhem log shows the right output to pilight. but nothing happens. next i take a lock in the pilight-logs, maybe there is another mistake on my side.
maybe the ELRO protocol, i tried many diverent; elro_800_switch, elro_he (out off pilight-receive) and
some other variations. next time i send the fhem-log-file here.
thanks for the help.

[ottowalkes]

hallo again,
i fixed my problem. my elro-protocoll out off pilight-receive is "elro_800_switch".
in the 98_pilight.pm i missed this protocol, so i edit the 98_pilight.pm and add a row:
case 'elro_800_switch' { $code = $code . ""systemcode":$systemcode, "unitcode":$unit,"$param":1"}
now it works for me.
thanks for the modul.
walter