Skip to content

Latest commit

 

History

History
410 lines (249 loc) · 28.9 KB

azure-devops-scripts.md

File metadata and controls

410 lines (249 loc) · 28.9 KB
Raw

Azure DevOps Scripts

Copyright (c) Microsoft Corporation.
Licensed under the MIT license.
THIS CODE AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.

Introduction

This document discusses the scripts available to help simplify the onboarding process to Azure Landing Zones design using Azure DevOps pipelines. The Azure DevOps Pipelines Onboarding Guide document contains detailed onboarding instructions, and is referenced in this document.

Table of Contents

Required Tools

The instructions in this document and scripts in the /scripts/onboarding folder require the latest versions of the following tools are installed. Review each tool and complete any post-install configuration instructions provided.

Azure CLI

Install instructions:

After installation:

Azure CLI devops extension

Install instructions:

After installation:

Optionally, you may also want to perform the following steps:

  • Set the default Azure DevOps organization and project. For example:
    az devops configure --defaults project=[DEVOPS-PROJECT] organization=https://dev.azure.com/[DEVOPS-ORG]

  • Verify the default values are set correctly. For example:
    az devops configure --list

These additional steps are optional since the scripts use the DEVOPS_ORG and DEVOPS_PROJECT_NAME environment variables. Setting the default Azure DevOps organization and project may be useful when you are invoking the az devops commands directly.

jq.exe

Install instructions:

Verify that the path to jq.exe is included in the echo %PATH% output, i.e. it must be part of your system path or user environment path for the user running these scripts.

Git for Windows

Download from here:

Git for Windows includes Unix utilities (e.g. cut, tr, etc.) that are used by these scripts.

Verify that the path to these utilities is included in the echo %PATH% output, i.e. it must be part of your system path or user environment path for the user running these scripts. The default installation location for these files is C:\Program Files\Git\usr\bin.

NOTE: In addition to ensuring the path to these utilities is included in your %PATH%, you should also verify that it precedes the C:\Windows\System32 path. This is due to a conflict with the Linux version of the sort.exe utility and the Windows version of the sort.exe utility. The following script file invokes sort.exe and expects the Linux version: list-management-groups.bat.

Required Permissions

Azure DevOps

If you need to create Azure DevOps project(s) or manage organization-wide policy settings, your user account will need to be a member of the Project Collection Administrators group in your Azure DevOps organization.

If you don't need to create Azure DevOps project(s) or manage organization-wide policy settings, then your user account will only need to be a member of the Project Administrators group in an existing Azure DevOps project.

Detailed instructions on how to configure security & usage settings for Azure DevOps are outside the scope of this documentation. For additional information on these topics, refer to the following: Settings, Security & Usage documentation.

Azure Active Directory

Your user account needs the Global administrator role assigned in your Azure Active Directory.

Perform the following steps to verify your administrative access level:

  1. Navigate to https://aad.portal.azure.com/
  2. Select the Azure Active Directory service
  3. Select Manage > Roles and administrators
  4. Select the Global administrator role
  5. Verify your account is assigned the Global administrator role

Next, ensure your account has elevated access at Azure AD tenant root scope, so that you are able to manage management groups: Reference: https://learn.microsoft.com/azure/role-based-access-control/elevate-access-global-admin

Here are some sample Azure CLI commands you can use:

Note: these commands are available as scripts in the /scripts/onboarding folder: add-root-user-access-admin.bat, list-root-user-access-admin.bat, and remove-root-user-access-admin.bat.

  • Elevate currently signed in user:
    az rest --method post --url "/providers/Microsoft.Authorization/elevateAccess?api-version=2016-07-01"

  • List role assignments:
    az role assignment list --role "User Access Administrator" --scope "/" -o table

  • Remove elevated access:
    az role assignment delete --assignee [email protected] --role "User Access Administrator" --scope "/"

Azure Subscriptions

You will need to either have the ability to create new Azure subscriptions or have Azure subscriptions created for you and ready for use. If you need to create Azure subscriptions, then review the following documentation that discusses the role requirements depending on whether your Azure subscriptions are procured through an Azure Enterprise Agreement, Microsoft Customer Agreement, Microsoft Partner Agreement, or Microsoft Online Service Program billing account: Create an additional Azure subscription.

Setting Up Azure DevOps

Azure DevOps is used to define pipelines that automate landing zone deployments. It may also be used as the location for the repository files.

This section is optional if you have already created and configured your Azure DevOps organization and project.

Refer to the instructions in Azure DevOps Setup for assistance in setting up a new Azure DevOps environment or validating an existing one against best practices.

Creating Your Repository

This section is optional. If you have already forked or cloned the CanadaPubSecALZ repository into a repository of your choosing, then proceed to the next section.

There are two options for hosting the repository code, outlined in the following subsections. Regardless of where you manage your repository (Azure DevOps or GitHub), the pipelines used to run the automation workflow reside in Azure DevOps.

Import the CanadaPubSecALZ GitHub repository into your Azure DevOps repository

Choose this option if you are already using (or more comfortable working with) Azure DevOps as a location for maintaining your repository files. This option is also a good choice if you want to simplify Azure DevOps pipelines creation by referencing Git repositories in Azure DevOps instead of GitHub Enterprise.

Follow the instructions in the documentation Import a Git repo.

In the instructions above, you will use the following Clone URL value: https://github.com/Azure/CanadaPubSecALZ.git, and the process will look similar to the following screenshot at the import stage:

Import a Git Repo

Once you have imported the CanadaPubSecALZ repository into your Azure DevOps repository, it will not have any connection with the original GitHub repository. If you would like to synchronize with the original GitHub repository, you will need to add a remote pointing to the original repo.

To add a remote named upstream to the GitHub repository, first clone your newly imported copy in Azure DevOps, and then run the following commands from the cloned repository workspace:

git remote add upstream https://github.com/Azure/CanadaPubSecALZ.git
git remote update

Once you have established a remote (upstream) connection from your Azure DevOps repository back to the original GitHub repository, you can get updates using the following git command:

git pull upstream main && git push

This is just one example of interacting with the remote (upstream). It shows how to update the main branch of your Azure DevOps repository with the main branch of the original GitHub repository. Additional operations such as pushing changes from your repository back to the original are also possible, but beyond the scope of this documentation.

Fork the CanadaPubSecALZ GitHub repository into your GitHub repository

Choose this option if you are already using (or more comfortable working with) GitHub Enterprise, as opposed to Azure DevOps as a location for maintaining your repository files.

Follow the instructions in the documentation Fork a repo.

Using the documentation above, you will perform the following steps:

  1. Navigate to https://github.com/Azure/CanadaPubSecALZ
  2. Click on the Fork button

If you are a member of a GitHub organization, you will be prompted to select the destination account where the repository will be forked into.

If you are not a member of any GitHub organizations, the CanadaPubSecALZ repository will be automatically forked into your personal account.

After the repository fork operation has completed, you will be redirected to the newly forked GitHub repository.

Once you have forked the CanadaPubSecALZ repository into your GitHub repository, it will not have any connection with the original GitHub repository. If you would like to synchronize with the original GitHub repository, you will need to add a remote pointing to the original repo.

To add a remote named upstream to the GitHub repository, first clone your newly imported copy in Azure DevOps, and then run the following commands from the cloned repository workspace:

git remote add upstream https://github.com/Azure/CanadaPubSecALZ.git
git remote update

Once you have established a remote (upstream) connection from your Azure DevOps repository back to the original GitHub repository, you can get updates using the following git command:

git pull upstream main && git push

This is just one example of interacting with the remote (upstream). It shows how to update the main branch of your Azure DevOps repository with the main branch of the original GitHub repository. Additional operations such as pushing changes from your repository back to the original are also possible, but beyond the scope of this documentation.

Using the Scripts to Configure Your Environment

The following subsections go through the process of using the scripts to configure Azure DevOps pipelines for deploying Azure Landing Zones. Follow the steps and run the scripts in the order the subsections are presented, as some steps have dependencies on previous steps. For example, you will need an Azure service principal created before you can create an Azure DevOps service endpoint.

Create an environment variable settings file

Make a copy of the set-variables.DevOpsOrgName.bat, replacing DevOpsOrgName portion of the file name with the name of your Azure DevOps organization or any other meaningful name (no spaces).

Next, edit the newly created file, using the guidance in the following table.

Variable Name Description Example
DEVOPS_TENANT_ID Azure AD tenant identifier. c0196602-5a7d-4b1e-9128-69dbf7152c18
DEVOPS_MGMT_GROUP_NAME Azure AD root management group name. Tenant Root Group
DEVOPS_SP_NAME Azure service principal name. The service principal has Owner RBAC at the tenant root scope. spn-azure-platform-ops
DEVOPS_SG_NAME Azure security group name for 'Owner` RBAC subscription, network, and logging alz-owners
DEVOPS_ORG Azure DevOps organization URL. https://dev.azure.com/DevOpsOrgName
DEVOPS_PROJECT_NAME Azure DevOps project name. CanadaPubSecALZ
DEVOPS_REPO_NAME_OR_URL Azure DevOps or GitHub repository name or URL. CanadaPubSecALZ
DEVOPS_REPO_TYPE Repository type. Can be tfsgit or github. tfsgit
DEVOPS_REPO_BRANCH Repository branch name. main
DEVOPS_PIPELINE_NAME_SUFFIX Azure DevOps pipeline name suffix -ci
DEVOPS_SE_NAME Azure DevOps service endpoint name. spn-azure-platform-ops
DEVOPS_SE_TEMPLATE File name for the generated Azure DevOps service endpoint template JSON file. service-endpoint.AzDevOpsOrg.json
DEVOPS_VARIABLES_GROUP_NAME Azure DevOps variable group name. Leave this set to firewall-secrets as the YAML pipeline for networking is hard-coded to use this value. firewall-secrets
DEVOPS_VARIABLES_ARE_SECRET Indicates whether variables in the variable group are marked as secret. Possible values are true or false. Recommend using true unless you plan to reconfigure your variable group to use another secure source such as KeyVault. true
DEVOPS_OUTPUT_DIR Name of temporary folder for generated files. .\output

Once you have saved your changes to the newly created file, run it from the command line. After running your new script, run the list-variables.bat script to view these environment variable settings.

Create service principal

Run the create-service-principal.bat script to create an Azure AD service principal with Owner RBAC at the tenant root scope.

There is also a delete-service-principal.bat script that you can use to delete an existing service principal. For example, if you want to re-create the service principal, use the delete-service-principal.bat script followed by the create-service-principal.bat script.

If you would rather perform this step manually, detailed guidance is available at the following location: Step 1 - Create Service Principal Account & Assign RBAC.

Create service endpoint

Note that this script, create-service-endpoint.bat, depends on the output from a successful run of the create-service-principal.bat script (mentioned in the previous section), which contains the service principal password. If that output does not exist, you will be prompted for the service principal password.

Run the create-service-endpoint.bat script to create an Azure DevOps service endpoint (aka service connection). this script uses an output file generated in the previous step to provide the service principal attributes needed to create the service endpoint.

There is also a delete-service-endpoint.bat script that you can use to delete an existing service endpoint. For example, if you want to re-create the service endpoint, use the delete-service-endpoint.bat script followed by the create-service-endpoint.bat script.

If you would rather perform this step manually, detailed guidance is available at the following location: Step 2 - Configure Service Connection in Azure DevOps Project Configuration.

Create landing zone pipelines

Run the create-pipelines.bat script to create the landing zone pipelines:

  • management-groups-ci
  • roles-ci
  • platform-logging policy-ci
  • platform-connectivity-hub-nva-ci
  • platform-connectivity-hub-azfw-ci
  • platform-connectivity-hub-azfw-policy-ci
  • platform-identity-ci
  • subscriptions-ci

If you would rather perform these steps manually, detailed guidance is available in the following sections of the Azure DevOps Pipelines Onboarding Guide:

Give pipelines access to service endpoint

Run the share-service-endpoint.bat script to allow all pipelines in the project to use the service endpoint.

If you would rather perform this step manually, detailed guidance is available at the following location: Step 2 - Configure Service Connection in Azure DevOps Project Configuration.

Create variable group

The firewall-secrets variable group is required by the networking pipeline when using a Fortinet firewall deployment configuration. It is optional for all other scenarios.

If needed, run the create-variable-group.bat script to created the required variable group and variables in Azure DevOps.

Create security group

Run the create-security-group.bat script to create a new Azure security group. The security group name is defined using the %DEVOPS_SG_NAME% environment variable. Save the Azure security group GUID provided by this script for later use when configuring your environment. It will be used in the securityGroupObjectIds values in the environment configuration (YAML) files and subscription configuration (JSON) files.

Configure your environment

Before running the landing zone pipelines, you will need to create and edit configuration files (YAML and JSON) with values corresponding to your environment, along with specific configuration information needed for each layer: management groups, roles, logging, policy, networking, and subscriptions.

Detailed guidance on these configuration requirements is available in the Azure DevOps Pipelines Onboarding Guide. In that documentation you can start at this location: Step 3 - Configure Management Groups, since Step 1 and Step 2 have already been completed using the scripts mentioned above in this document. As you work through Steps 3 - 8 in the other document, keep in mind that you can skip any instructions related to creating the service principal, service endpoint, or Azure DevOps pipelines that you have already performed using the scripts in this document.

Run pipelines

Run the run-pipelines.bat script to interactively run individual landing zone pipelines. Note that at present time the subscriptions-ci pipeline is not included in the list of runnable pipelines as the script requires additional work to enable that capability.

Clear environment variables used by scripts

Run the unset-variables.bat script to clear (unset) all "DEVOPS_" environment variables

Files

.gitignore

The /scripts/onboarding/.gitignore file prevents the ./output folder (default value for %DEVOPS_OUTPUT_DIR%) contents from being added to Azure Repos. This is important as the create-service-principal.bat and create-service-endpoint.bat scripts use this folder to store the client id and password for the service principal, and you do not want to expose these values in the repository.

Scripts

Area File Name Description
Azure create-security-group.bat Create an Azure security group to be used in the securityGroupObjectIds values in environment configuration (YAML) files and subscription configuration (JSON) files
Azure delete-management-groups.bat Deletes all management groups in the current tenant, with the exception of the 'Tenant Root Group'. It is useful for resetting the management groups in your Azure AD tenant. Exercise caution when using this script as it will remove some or possibly all management groups in the Azure AD tenant, depending on how it is invoked. Review and ensure you understand the information in Appendix A - Deleting Management Groups before using this script.
Azure list-management-groups.bat List all Management Groups in the current tenant. It is useful for validating the successful deployment of the Management Groups pipeline.
Azure DevOps create-pipelines.bat Create the Azure DevOps pipelines for landing zone deployment.
Azure DevOps create-service-endpoint.bat Create a new Azure DevOps service endpoint for use with Azure Pipelines.
Azure DevOps create-variable-group.bat Create a variable group and variables within that group to store secrets used by the pipelines. The default variable group name used in the example scripts is firewall-secrets, and may be configured via the %DEVOPS_VARIABLES_GROUP_NAME% environment variable. The default variable names used in the example scripts are var-hubnetwork-nva-fwUsername and var-hubnetwork-nva-fwPassword. The variable group name may be set to any valid value for an Azure DevOps pipeline variable group. The variable names must remain the same as the example scripts, otherwise the pipeline definitions will need to be updated to match different variable names.
Azure DevOps delete-pipelines.bat Delete the Azure DevOps pipelines.
Azure DevOps delete-service-endpoint.bat Delete the specified service endpoint used by Azure DevOps pipelines.
Azure DevOps run-pipelines.bat Runs all landing zone pipelines in sequence.
Azure DevOps service-endpoint.[ENV].json Template files generated by the create-service-endpoint.bat script.
Azure DevOps service-endpoint.template.json Template file used by the create-service-endpoint.bat script to generate environment-specific templates in the %DEVOPS_OUTPUT_DIR% folder.
Azure DevOps share-service-endpoint.bat Update the existing Azure DevOps service endpoint, allowing it to be used by all pipelines in the project.
Azure DevOps update-variable-group.bat Update the existing Azure DevOps variable group, applying or removing the secret attribute as specified. This script is called by create-variable-group.bat and can also be invoked directly.
Environment list-variables.bat Display all DEVOPS_ environment variables.
Environment set-variables.[ENV].bat These scripts, one per environment, set the base DEVOPS_ environment variables.
Environment unset-variables.bat Unset all DEVOPS_ environment variables.
Tenant add-root-user-access-admin.bat Elevate the currently signed-in user to "User Access Administrator" role.
Tenant create-service-principal.bat Create a new Azure service principal that is used for pipeline authentication.
Tenant delete-service-principal.bat Delete the specified Azure service principal.
Tenant list-root-user-access-admin.bat List the users with elevated "User Access Administrator" role at tenant root scope.
Tenant remove-root-user-access-admin.bat Remove the specified user from elevated "User Access Administrator" role at tenant root scope.
Utility whereami-azure.bat Show all identities signed-in with the current Azure CLI session.
Utility whoami-azure.bat Show the active identity signed-in with the current Azure CLI session.

Appendices

Appendix A - Deleting Management Groups

The delete-management-groups.bat script offers a convenient way of quickly tearing down the management group hierarchy (or a portion thereof) is an Azure AD tenant. This can be useful if you are experimenting with landing zone deployments and need a fast, programmatic way to remove management group deployments.

This script is designed to take an optional parameter that represents the topmost management group you would like to to remove, along with all child management groups in the hierarchy. If no parameter is provided, the default behavior of this script is to operate at the Tenant Root Group, which is the topmost management group level in an Azure AD tenant. If a parameter is provided, it must specify an existing management group (use the ID, not the Display Name).

Note that as part of the removal of management groups in the hierarchy, the delete-management-groups.bat script has the following additional effects:

  • Any subscriptions that are contained in a removed management group will themselves be removed from that management group. This is required, otherwise the management group cannot be deleted.
  • Any custom role definitions (i.e. those starting with the name Custom - ) will be deleted.
  • Any custom role assignments on subscriptions that are removed from management groups about to be deleted will themselves be deleted.

The following example illustrates the effects of invoking the delete-management-groups.bat script using both the parameter and parameter-less invocation methods.

We start with an example management group hierarchy (MyOrganization) deployed by the CanadaPubSecALZ pipeline, along with 2 manually created management groups (ChildGroup1 and ChildGroup2) created at the tenant root management scope:

Next, we run the delete-management-groups.bat script, passing in as a parameter one of the nested management groups with ID Management:

After confirming we want to proceed, the affected objects are displayed (one management group and one subscription), a warning message is displayed, and we are prompted for confirmation to proceed:

After confirming we want to proceed, an existing subscription is removed from the management group, a check for custom role definitions at the management group scope is performed (none found), and the management group is removed:

After the first run of the delete-management-groups.bat script, the updated management group hierarchy appears as follows:

Note in the above image that the subscription ALZ-Logging has been re-parented to the Tenant Root Group and the Management management group has been deleted as a result of this script run.

For the second run of the delete-management-groups.bat script, we will remove the entire MyOrganization management group hierarchy without affecting the other 2 management groups that are children of the Tenant Root Group. We do this by passing the ID of the MyOrganization management group as a parameter to the script:

Similar to the previous script run, we are shown the current environment variables in effect and prompted to confirm (above), and are shown the affected objects along with a warning message and prompted to confirm again (below):

As the script runs, it outputs each operation and results in sequence:

After the second time this script is run, the MyOrganization management group (and all child management groups) have been deleted, and the updated management group hierarchy appears as follows:

Note that the ALZ-Networking and ALZ-Workload-Generalized subscriptions are now parented by the Tenant Root Group. The ChildGroup1 and ChildGroup2 management groups remain intact, since they were not part of the MyOrganization management group hierarchy.

For the third and final run of the delete-management-groups.bat script, we will remove all management groups under the Tenant Root Group. We do this by invoking the script with no parameters. When invoked with no parameters, the script uses the value stored in the %DEVOPS_TENANT_ID% environment variable, which effectively removes all management groups under the Tenant Root Group. An equivalent way to achieve this is by passing the ID of the Tenant Root Group (your Azure AD tenant ID) as the parameter value; however, it is easier to just run the script with no parameters.

Note that we could have achieved the same effect with a single invocation of the script with no parameters the first time we ran it. The previous invocations are simply examples of how to remove and individual management group or portion of the complete management group hierarchy.

After the third time this script is run (with no parameters), only the Tenant Root Group remains, and all subscriptions have been re-parented under it: