Ironmon-Tracker v8.5.0

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

Quick Help Guides

• Full Installation Guide
• Setup Automatic Seed Creation: "New Run"
• Customization Tips for Streamers
• Fun Tracker Extensions
• FAQ & Troubleshooting Issues

Release Notes

• You can now see the held items of each Pokémon on a Trainer's team in the Log Viewer
• Added Super Kaizo randomizer settings file for Fire Red, Leaf Green, and Emerald
• Updated Stream Connect's !route command to accept encounter type as a parameter, such as !route super rod to see everything you've caught with the Super Rod
• Several internal code updates to accommodate extension developers
  • New Nat. Dex extension is now available!
• [Linux] Fixed an issue where the Crash Recovery screen would incorrectly appear when a new seed was created
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac

Ironmon-Tracker v8.4.4

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

Quick Help Guides

• Full Installation Guide
• Setup Automatic Seed Creation: "New Run"
• Customization Tips for Streamers
• Fun Tracker Extensions
• FAQ & Troubleshooting Issues

Release Notes

• [8.4.4] Added Randomizer settings file for new Super Kaizo ruleset
• Added wild encounter tracking for Safari Zone areas
• Added a help notification for a common issue with folder paths that include accented characters (such as 'é')
• Added support for additional config options in Settings.ini for Steam Deck (i.e. "Java Path")
• Fixed a rare issue where starting a new game didn't display the Pokémon on the Tracker until the first battle begun
• Several internal code changes to accommodate future extension development
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow

Ironmon-Tracker v8.4.3

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

Quick Help Guides

• Full Installation Guide
• Setup Automatic Seed Creation: "New Run"
• Customization Tips for Streamers
• Fun Tracker Extensions
• FAQ & Troubleshooting Issues

Release Notes

• Added wild encounter tracking for Safari Zone areas
• Added a help notification for a common issue with folder paths that include accented characters (such as 'é')
• Added support for additional config options in Settings.ini for Steam Deck (i.e. "Java Path")
• Fixed a rare issue where starting a new game didn't display the Pokémon on the Tracker until the first battle begun
• Several internal code changes to accommodate future extension development
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow

Ironmon-Tracker v8.4.2

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• After defeating a trainer, the Tracker will now show how many trainers are left to defeat in the current area.
• New bottom-box Carousel options available in Settings > Setup, such as adjusting the rotation speed.
• The Pokémon's gender can now be displayed on the Tracker screen. Option is under Settings > Extras.
• [Stream Connect] Fixed command input always being set to lowercase. If you use Streamerbot, please re-import code from Tracker's Stream Connect page (v1.0.5).
• [Stream Connect] Added a !favorites command to display your favorite starters.
• Fixed a bug with old data appearing when using Retry Battle.
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @jtigues

Ironmon-Tracker v8.4.1

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• [8.4.1] Fixed an issue where the tracker would crash after a fresh download.
• New Stream Connect feature!
  • You can now connect your Tracker to your Twitch stream, allowing viewers to use chat commands to get info from the Tracker.
  • Click the "Help" button on the Stream Connect screen to learn more about setting this up.
• Added a fun sparkle effect when you encounter a shiny Pokémon
• Added a safety check to prevent custom extensions from crashing the Tracker on startup
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow

Ironmon-Tracker v8.3.9

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• [8.3.9] Fixed an issue with the Coverage Calculator incorrectly counting single-typed Pokémon as dual-type.
• [8.3.9] Fixed an issue where the step counter could get stuck at 0 steps at the beginning of a new game.
• Fixed an issue where Game Over screen would appear at random times while playing Emerald, Ruby, or Sapphire
• Early pivot route info ("Walking Seen 2/5") now shows outside of battle too
• Base EXP yield info now shown on the info page when clicking on the Pokémon icon. If you're currently in battle with that Pokémon, it will be the true EXP yield amount instead, based on the level of the Pokémon you're battling and shown in green
• Renamed "Quickload" to "New Runs", to help clarify the feature always loads a new game ROM and not an old ROM from a previous playthrough
• Fixed an issue where Pokémon names became fully capitalized if "Show nicknames" was enabled but no nickname was set
• Fixed an issue where the Update Screen would incorrectly notify of a new update when none was available
• Fixed move summaries for several multi-hit moves that were incorrectly stating the move made contact
• Coverage Calculator now automatically includes Hidden Power's type if it's set by the player
• Further internal data cleanup (Pokémon, Trainers, Battle stuff, etc) and optimization
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow
• @jtigues
• @Skargonas

Ironmon-Tracker v8.3.8

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• Fixed an issue where Game Over screen would appear at random times while playing Emerald, Ruby, or Sapphire
• Early pivot route info ("Walking Seen 2/5") now shows outside of battle too
• Base EXP yield info now shown on the info page when clicking on the Pokémon icon. If you're currently in battle with that Pokémon, it will be the true EXP yield amount instead, based on the level of the Pokémon you're battling and shown in green
• Renamed "Quickload" to "New Runs", to help clarify the feature always loads a new game ROM and not an old ROM from a previous playthrough
• Fixed an issue where Pokémon names became fully capitalized if "Show nicknames" was enabled but no nickname was set
• Fixed an issue where the Update Screen would incorrectly notify of a new update when none was available
• Fixed move summaries for several multi-hit moves that were incorrectly stating the move made contact
• Coverage Calculator now automatically includes Hidden Power's type if it's set by the player
• Further internal data cleanup (Pokémon, Trainers, Battle stuff, etc) and optimization
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow
• @jtigues
• @Skargonas

Ironmon-Tracker v8.3.6

Easy Install/Upgrade (Express)

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• You can now click on the "Heals in bag" on the Tracker to see all of the items in your item bag
• Added option to show Pokémon nicknames on Tracker; look under Settings > Setup
• Future Tracker updates should hopefully no longer require restarting the Bizhawk emulator
• Tracker info and screen transitions are now more accurate when doing battles
• Log Viewer now supports randomized Pokémon types and moves
• Reworked the internal Tracker data and notes for a smoother gameplay experience
• Better error message detection when Quickload fails because of missing/wrong Java
• General improvements to Tracker startup speed
• Fix the Game Over screen (again) after beating the game
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow
• @jtigues

Ironmon-Tracker v8.3.0

Express Install/Upgrade

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• You can now look up all possible Randomized Evos by clicking on a Pokémon's icon; percentages shown are estimates (Data provided by brdy and Harkenn)
• A simple Coverage Calculator has been added under Extras > Tools
• Fixed a critical bug where changing Quickload settings would incorrectly overwrite your attempts count. In addition, the Quickload screen setup UI has been updated to help show what settings you are using
• Fixed a bug where manually loading saved Tracker notes would fail to actually load them into the Tracker
• Fixed a bug where the "Congratulations" screen would change to "GameOver" after leaving the Hall of Fame
• Fixed a bug where the drop-down list of Themes would grow in size
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow
• @jtigues

Ironmon-Tracker v8.2.0

Express Install/Upgrade

1. Download the UpdateOrInstall.lua file under Assets below
2. Move this file to a folder on your computer
   • Or place it in your existing Tracker folder if you have one
   • Note: Do NOT place inside a OneDrive folder or secondary hard drive such as D:\ or E:\
3. Open your emulator's Lua Console or Scripting Tool, then open the UpdateOrInstall.lua file
4. Follow the prompts to complete installation

For a more detailed install process, check out our Installation Guide.

If you're a streamer, check out our Streamer Setup Tips to learn more about setting up some cool features of your Tracker for your stream

Release Notes

• New animated Pokémon Icon Set: Walking Pals! Try it out in Settings > Setup
  • Walking Pals Pokémon are the first interactive, animated icon set for the Tracker
  • They will react to you playing the game, such as walking around or doing battle
• While editing Tracker Controls, you can now "Reset to Default"
• Fixed a bug where an enemy move would be revealed if they woke up and hit themselves from confusion
• Fixed a bug where choosing not to randomize Trainer names/classes would break the Log Viewer
• Fixed an issue where clicking on a pop-up window would also click on the Tracker screen behind it
• UI improvements to the Log Viewer and Survival PC Heal tracking (click the heart icon to auto-track pc heals)
• For a full list of new features, changes and bug fixes, check out the Version Changelog

Contributors for this Release

• @UTDZac
• @Fellshadow
• @jtigues