[Support]: Very High CPU Usage Periodically Locks Up Unraid #20862

nickcmeyer · 2025-11-09T17:55:56Z

nickcmeyer
Nov 9, 2025

Describe the problem you are having

I have 2 docker containers that run Frigate on an otherwise lightly used Unraid server (Realistically Frigate, NPM for Frigate, Home Assistant, and a few utilities), although I believe this same issue has also been present on several previous hardware, single docker, etc. Previously I would have hard lockups on Unraid, no access to Unraid or Frigate UI, and a power monitor suggesting that the server is maxing CPU usage requiring server reboot. With my 265K I will lose Unraid access but rebooting either Frigate container allows me to get back into Unraid. If I then run HTOP I can see that the load average is 20+ (At one point I saw 80) but since I've temporarily resolved the issue by restarting Frigate the offending process is no longer present. Under normal circumstance the load average is about 2-3. If I reboot Unraid I get maybe 30-45 days between presentation of this issue, with rebooting Frigate I get about 3-5. Unraid support simply indicates that it is not an Unraid issue and due to "A docker container".

HTOP after restarting Frigate

I'm not really sure how to troubleshoot this issue at this point. Frigate logs are completely normal (disregarding the 2 cameras that are currently disconnected). I've attached the Unraid diag file.

Version

0.16.2-4d58206

What browser(s) are you using?

No response

Frigate config file

mqtt:
  enabled: false

#detectors:
#  coral_pci:
#    type: edgetpu
#    device: pci:1

detectors:
  ov_1:
    type: openvino
    device: GPU

model:
  path: plus://************************

database:
  path: /config/frigate.db

birdseye:
  width: 1920
  height: 1080
  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
  quality: 8
  mode: continuous

ffmpeg:
  path: '7.0'
  output_args:
    record: preset-record-generic-audio-copy

detect:
  # Optional: Number of frames without a detection before Frigate considers an object to be gone. (default: 5x the frame rate)
  max_disappeared: 50
  # Optional: Configuration for stationary object tracking
  stationary:
    # Optional: Frequency for confirming stationary objects (default: shown below)
    # When set to 0, object detection will not confirm stationary objects until movement is detected.
    # If set to 10, object detection will run to confirm the object still exists on every 10th frame.
    interval: 1000
    # Optional: Number of frames without a position change for an object to be considered stationary (default: 10x the frame rate or 10s)
    threshold: 50
    # Optional: Define a maximum number of frames for tracking a stationary object (default: not set, track forever)
    # This can help with false positives for objects that should only be stationary for a limited amount of time.
    # It can also be used to disable stationary object tracking. For example, you may want to set a value for person, but leave
    # car at the default.
    # WARNING: Setting these values overrides default behavior and disables stationary object tracking.
    #          There are very few situations where you would want it disabled. It is NOT recommended to
    #          copy these values from the example config into your config unless you know they are needed.
    #max_frames:
      # Optional: Default for all object types (default: not set, track forever)
      #default: 3000
      # Optional: Object specific values
      #objects:
        #person: 1000
  annotation_offset: -1000
  enabled: true
objects:
  filters:
    person:
      min_area: 1000
      #max_area: 20000
      min_score: 0.75
      threshold: 0.85
    cat:
      min_area: 1000
      #max_area: 20000
      min_score: 0.75
      threshold: 0.85
    dog:
      min_area: 1000
      #max_area: 20000
      min_score: 0.75
      threshold: 0.85
    car:
      #min_area: 1000
      #max_area: 20000
      min_score: 0.75
      threshold: 0.85

motion:
  # Optional: The threshold passed to cv2.threshold to determine if a pixel is different enough to be counted as motion. (default: shown below)
  # Increasing this value will make motion detection less sensitive and decreasing it will make motion detection more sensitive.
  # The value should be between 1 and 255.
  threshold: 30
  # Optional: Minimum size in pixels in the resized motion image that counts as motion (default: 30)
  # Increasing this value will prevent smaller areas of motion from being detected. Decreasing will
  # make motion detection more sensitive to smaller moving objects.
  # As a rule of thumb:
  #  - 15 - high sensitivity
  #  - 30 - medium sensitivity
  #  - 50 - low sensitivity
  contour_area: 40
  # Optional: Alpha value passed to cv2.accumulateWeighted when averaging frames to determine the background (default: shown below)
  # Higher values mean the current frame impacts the average a lot, and a new object will be averaged into the background faster.
  # Low values will cause things like moving shadows to be detected as motion for longer.
  # https://www.geeksforgeeks.org/background-subtraction-in-an-image-using-concept-of-running-average/
  frame_alpha: 0.015
  # Optional: Height of the resized motion frame  (default: 50)
  # This operates as an efficient blur alternative. Higher values will result in more granular motion detection at the expense
  # of higher CPU usage. Lower values result in less CPU, but small changes may not register as motion.
  frame_height: 100
  #8MP total pixels resived to 17,700

record:
  enabled: true
  # Optional: Number of minutes to wait between cleanup runs (default: shown below)
  # This can be used to reduce the frequency of deleting recording segments from disk if you want to minimize i/o
  expire_interval: 60
  # Optional: Retention settings for recording
  retain:
    # Optional: Number of days to retain recordings regardless of events (default: shown below)
    days: 21
    # Optional: Mode for retention. Available options are: all, motion, and active_objects
    #   all - save all recording segments regardless of activity
    #   motion - save all recordings segments with any detected motion
    #   active_objects - save all recording segments with active/moving objects
    # NOTE: this mode only applies when the days setting above is greater than 0
    mode: all
  # Optional: Event recording settings
  alerts:
    retain:
      days: 45
    pre_capture: 5
    post_capture: 10
  detections:
    retain:
      days: 21
    pre_capture: 5
    post_capture: 10
snapshots:
  enabled: true
  # Optional: save a clean PNG copy of the snapshot image (default: shown below)
  clean_copy: true
  # Optional: print a timestamp on the snapshots (default: shown below)
  timestamp: true
  # Optional: draw bounding box on the snapshots (default: shown below)
  bounding_box: true
  # Optional: crop the snapshot (default: shown below)
  crop: false
  # Optional: height to resize the snapshot to (default: original size)
  #height: 175
  # Optional: Restrict snapshots to objects that entered any of the listed zones (default: no required zones)
  #required_zones:
  #  - SideYard-walkway
  #  - SideYard-driveway
  #  - FrontYard-walkway
  #  - FrontYard-driveway
  #  - PondYard-Close
  #  - PondYard-Far
  #  - BackYard-Close
  #  - BackYard-Far
  #  - PackingRoom-Front
  #  - PackingRoom-Parking
  #  - Barns-Driveway
  # Optional: Camera override for retention settings (default: global values)
  retain:
    # Required: Default retention days (default: shown below)
    default: 7
    # Optional: Per object retention days
    #objects:
    #  person: 15

# Optional: jsmpeg stream configuration for WebUI
live:
  # Optional: Set the height of the jsmpeg stream. (default: 720)
  # This must be less than or equal to the height of the detect stream. Lower resolutions
  # reduce bandwidth required for viewing the jsmpeg stream. Width is computed to match known aspect ratio.
  height: 720
  # Optional: Set the encode quality of the jsmpeg stream (default: shown below)
  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
  quality: 8

# Optional: in-feed timestamp style configuration
# NOTE: Can be overridden at the camera level
timestamp_style:
  effect: shadow

go2rtc:
  streams:
    FrontPorch:
      - rtsp://admin:{FRIGATE_RTSP_PASSWORD}@192.168.2.102:554/cam/realmonitor?channel=1&subtype=0
    SideDrive:
      - rtsp://admin:{FRIGATE_RTSP_PASSWORD}@192.168.2.101:554/cam/realmonitor?channel=1&subtype=0
    BackYardWest:
      - rtsp://admin:{FRIGATE_RTSP_PASSWORD}@192.168.2.111:554/cam/realmonitor?channel=1&subtype=0
    PondCamera:
      - rtsp://admin:{FRIGATE_RTSP_PASSWORD}@192.168.2.110:554/cam/realmonitor?channel=1&subtype=0
    PackingRoomEve:
      - rtsp://admin:{FRIGATE_RTSP_PASSWORD}@192.168.2.108:554/cam/realmonitor?channel=1&subtype=0

cameras:
  FrontPorch:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/FrontPorch
          roles:
            - detect
            - record
            - audio
    best_image_timeout: 60

    detect:
      #width: 1296
      #height: 972
      fps: 4

    motion:
      mask: 
        0,0,1,0,1,0.317,0.84,0.153,0.637,0.044,0.399,0.021,0.325,0.113,0,0.55
      threshold: 30
      contour_area: 60
      improve_contrast: true
    objects:
      track:
        - person
        - cat
        - dog
        - car
    zones:
      FrontYard-walkway:
        coordinates: 
          0,1,0.524,1,0.52,0.885,0.504,0.833,0.5,0.791,0.496,0.747,0.494,0.706,0.474,0.222,0.341,0.201
        filters:
          person:
            min_area: 20000
            max_area: 3000000
        inertia: 3
      FrontYard-driveway:
        coordinates: 
          0.655,0.242,0.777,0.252,0.886,0.25,0.826,0.183,0.762,0.13,0.637,0.077,0.386,0.051,0.347,0.129,0.347,0.206
        filters:
          person:
            min_area: 6000
            max_area: 100000
          car:
            min_area: 20000
            max_area: 600000
        inertia: 3
        loitering_time: 0
      FrontYard-Yard:
        coordinates: 0.64,0.243,0.898,0.996,1,1,1,0.391,0.884,0.251
        inertia: 3
        loitering_time: 0
    review:
      alerts:
        required_zones:
          - FrontYard-walkway
          - FrontYard-driveway
          - FrontYard-Yard
      detections:
        required_zones: []
        labels: []
    snapshots:
      required_zones:
        - FrontYard-walkway
        - FrontYard-driveway
        - FrontYard-Yard
    ui:
      order: 1
      dashboard: true

  SideDrive:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/SideDrive
          roles:
            - detect
            - record
            - audio
    best_image_timeout: 60

    detect:
      #width: 1296
      #height: 972
      fps: 4

    motion:
      mask: 
        0,0.355,0.114,0.261,0.247,0.188,0.422,0.099,0.543,0.081,0.719,0.081,0.855,0.097,0.945,0.107,0.954,0.564,0.826,1,1,1,1,0,0.5,0,0,0
      threshold: 30
      contour_area: 60
      improve_contrast: true
    objects:
      track:
        - person
        - cat
        - dog
        - car

    zones:
      SideYard-walkway:
        coordinates: 
          0.826,1,0.953,0.565,0.949,0.205,0.776,0.17,0.597,0.204,0.347,0.334,0,0.583,0,1
        filters:
          person:
            min_area: 80000
            max_area: 700000
          car:
            min_area: 4000
            max_area: 1000000

        inertia: 3
        loitering_time: 0
      SideYard-driveway:
        coordinates: 
          0.948,0.151,0.791,0.116,0.506,0.134,0.271,0.239,0,0.434,0,0.587,0.35,0.331,0.606,0.199,0.777,0.171,0.95,0.208
        filters:
          person:
            min_area: 4000
            max_area: 100000
          car:
            min_area: 24000
            max_area: 300000

        inertia: 3
        loitering_time: 0
    review:
      alerts:
        required_zones:
          - SideYard-walkway
          - SideYard-driveway
      detections:
        required_zones: []
        labels: []
    snapshots:
      required_zones:
        - SideYard-walkway
        - SideYard-driveway

    ui:
      order: 2
      dashboard: true

  BackYardWest:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/BackYardWest
          roles:
            - detect
            - record
            - audio
    best_image_timeout: 60

    detect:
      #width: 1296
      #height: 972
      fps: 4

    #motion:
        #mask:    
            #- XXXX
    objects:
      track:
        - person
        - cat
        - dog
        - car

    zones:
      BackYard-Close:
        coordinates: 
          0,1,0.857,1,0.949,0.701,0.977,0.384,0.565,0.244,0.267,0.292,0,0.432
        filters:
          person:
            min_area: 50000
            max_area: 400000
            max_ratio: 0.8
          car:
            min_area: 40000
            max_area: 2000000
        inertia: 3
        loitering_time: 0
      BackYard-Far:
        coordinates: 
          0.563,0.243,0.977,0.383,0.968,0.192,0.774,0.127,0.64,0.1,0.416,0.098,0.239,0.128,0,0.252,0,0.431,0.266,0.291
        filters:
          person:
            min_area: 8000
            max_area: 100000
            max_ratio: 0.8
          car:
            min_area: 40000
            max_area: 400000

        inertia: 3
        loitering_time: 0
    review:
      alerts:
        required_zones:
          - BackYard-Close
          - BackYard-Far
      detections:
        required_zones: []
        labels: []
    snapshots:
      required_zones:
        - BackYard-Close
        - BackYard-Far

    ui:
      order: 3
      dashboard: true

    motion:
      mask: 
        0,0,0.998,0.002,1,1,0.874,1,0.954,0.705,0.977,0.443,0.982,0.153,0.725,0.079,0.407,0.07,0.202,0.115,0,0.224
      threshold: 30
      contour_area: 60
      improve_contrast: true
  PondCamera:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/PondCamera
          roles:
            - detect
            - record
            - audio
    best_image_timeout: 60

    detect:
      #width: 1296
      #height: 972
      fps: 4

    motion:
      mask: 
        0.998,0.002,1,0.39,0.877,0.252,0.74,0.122,0.675,0.09,0.472,0.021,0.402,0.004,0.091,0.004,0,0.029,0,0
      #threshold: 30
      contour_area: 60
      improve_contrast: true
      threshold: 30
    objects:
      track:
        - person
        - cat
        - dog
        - car

    zones:
      PondYard-Close:
        coordinates: 0,1,1,1,1,0.755,0.667,0.328,0.371,0.285,0,0.396
        filters:
          person:
            min_area: 8000
            max_area: 120000
          car:
            min_area: 200000
            max_area: 1000000

        inertia: 3
        loitering_time: 0
      PondYard-Far:
        coordinates: 
          0.371,0.283,0.669,0.328,0.765,0.45,1,0.754,1,0.464,0.714,0.139,0.399,0.038,0.16,0.026,0,0.061,0,0.182,0.15,0.116,0.311,0.087,0.37,0.216
        filters:
          person:
            min_area: 4000
            max_area: 100000
          car:
            min_area: 12000
            max_area: 200000
        inertia: 3
        loitering_time: 0
      Catio:
        coordinates: 
          0,0.186,0.153,0.093,0.332,0.062,0.386,0.171,0.37,0.3,0,0.401
        loitering_time: 0
        objects: cat
    review:
      alerts:
        required_zones: []
        labels: []
      detections:
        required_zones:
          - PondYard-Close
          - PondYard-Far
    snapshots:
      required_zones:
        - PondYard-Close
        - PondYard-Far
        - Catio

    ui:
      order: 4
      dashboard: true

  PackingRoomEve:
    ffmpeg:
      inputs:
        - path: rtsp://127.0.0.1:8554/PackingRoomEve
          roles:
            - audio
            - record
            - detect
    best_image_timeout: 60

    detect:
      #width: 1920
      #height: 1080
      fps: 5

    motion:
      mask: 0,0,0.998,0.002,0.999,0.453,0.2,0.432,0.192,0.253,0,0.261
      contour_area: 40
      frame_height: 150

      threshold: 30
      improve_contrast: true
    objects:
      track:
        - person
        - cat
        - dog
        - car

    zones:
      PackingRoom-Parking:
        coordinates: 
          0.487,1,0.925,1,1,1,1,0.694,0.887,0.527,0.528,0.501,0,0.474,0,1
        filters:
          person:
            min_area: 2000
            max_area: 200000
          car:
            min_area: 20000
            max_area: 800000
        inertia: 3
        loitering_time: 0
      Barns-Driveway:
        coordinates: 
          0.213,0.34,0.214,0.487,0,0.475,0,0.298,0.065,0.287,0.071,0.341
        filters:
          person:
            min_area: 2000
            max_area: 20000
          car:
            min_area: 4000
            max_area: 300000
        inertia: 3
        loitering_time: 0
      PackingRoom-ParkingFar:
        coordinates: 0.885,0.523,0.919,0.459,1,0.457,0.999,0.691
        loitering_time: 0
    review:
      alerts:
        required_zones:
          - PackingRoom-Parking
          - Barns-Driveway
      detections:
        required_zones: []
        labels: []
    snapshots:
      required_zones:
        - PackingRoom-Parking
        - Barns-Driveway


    ui:
      order: 5
      dashboard: true


version: 0.16-0

Relevant Frigate log output

2025-11-09 09:07:00.057430613  [2025-11-09 09:07:00] watchdog.BackYardWest          INFO    : Restarting ffmpeg...
2025-11-09 09:07:00.057485015  [2025-11-09 09:07:00] ffmpeg.PondCamera.detect       ERROR   : [rtsp @ 0x55685fad2580] method DESCRIBE failed: 404 Not Found
2025-11-09 09:07:00.057537787  [2025-11-09 09:07:00] ffmpeg.PondCamera.detect       ERROR   : [in#0 @ 0x55685fad2240] Error opening input: Server returned 404 Not Found
2025-11-09 09:07:00.057596552  [2025-11-09 09:07:00] ffmpeg.PondCamera.detect       ERROR   : Error opening input file rtsp://127.0.0.1:8554/PondCamera.
2025-11-09 09:07:00.057647961  [2025-11-09 09:07:00] ffmpeg.PondCamera.detect       ERROR   : Error opening input files: Server returned 404 Not Found
2025-11-09 09:07:00.057697444  [2025-11-09 09:07:00] watchdog.PondCamera            INFO    : Restarting ffmpeg...
2025-11-09 09:07:03.122970036  [2025-11-09 09:07:03] frigate.video                  ERROR   : BackYardWest: Unable to read frames from ffmpeg process.
2025-11-09 09:07:03.123051457  [2025-11-09 09:07:03] frigate.video                  ERROR   : BackYardWest: ffmpeg process is not running. exiting capture thread...
2025-11-09 09:07:03.123226460  [2025-11-09 09:07:03] frigate.video                  ERROR   : PondCamera: Unable to read frames from ffmpeg process.
2025-11-09 09:07:03.123331737  [2025-11-09 09:07:03] frigate.video                  ERROR   : PondCamera: ffmpeg process is not running. exiting capture thread...
2025-11-09 09:07:10.071609761  [2025-11-09 09:07:10] watchdog.PondCamera            ERROR   : Ffmpeg process crashed unexpectedly for PondCamera.
2025-11-09 09:07:10.071941947  [2025-11-09 09:07:10] watchdog.PondCamera            ERROR   : The following ffmpeg logs include the last 100 lines prior to exit.
2025-11-09 09:07:10.072070266  [2025-11-09 09:07:10] watchdog.BackYardWest          ERROR   : Ffmpeg process crashed unexpectedly for BackYardWest.
2025-11-09 09:07:10.072340480  [2025-11-09 09:07:10] ffmpeg.PondCamera.detect       ERROR   : [rtsp @ 0x561fea816580] method DESCRIBE failed: 404 Not Found
2025-11-09 09:07:10.072423951  [2025-11-09 09:07:10] ffmpeg.PondCamera.detect       ERROR   : [in#0 @ 0x561fea816240] Error opening input: Server returned 404 Not Found
2025-11-09 09:07:10.072485686  [2025-11-09 09:07:10] ffmpeg.PondCamera.detect       ERROR   : Error opening input file rtsp://127.0.0.1:8554/PondCamera.
2025-11-09 09:07:10.072730545  [2025-11-09 09:07:10] watchdog.BackYardWest          ERROR   : The following ffmpeg logs include the last 100 lines prior to exit.
2025-11-09 09:07:10.072913376  [2025-11-09 09:07:10] ffmpeg.PondCamera.detect       ERROR   : Error opening input files: Server returned 404 Not Found
2025-11-09 09:07:10.072923793  [2025-11-09 09:07:10] watchdog.PondCamera            INFO    : Restarting ffmpeg...
2025-11-09 09:07:10.072993746  [2025-11-09 09:07:10] ffmpeg.BackYardWest.detect     ERROR   : [rtsp @ 0x556c9fe1a580] method DESCRIBE failed: 404 Not Found
2025-11-09 09:07:10.073172276  [2025-11-09 09:07:10] ffmpeg.BackYardWest.detect     ERROR   : [in#0 @ 0x556c9fe1a240] Error opening input: Server returned 404 Not Found
2025-11-09 09:07:10.073261514  [2025-11-09 09:07:10] ffmpeg.BackYardWest.detect     ERROR   : Error opening input file rtsp://127.0.0.1:8554/BackYardWest.
2025-11-09 09:07:10.073324093  [2025-11-09 09:07:10] ffmpeg.BackYardWest.detect     ERROR   : Error opening input files: Server returned 404 Not Found
2025-11-09 09:07:10.073380895  [2025-11-09 09:07:10] watchdog.BackYardWest          INFO    : Restarting ffmpeg...
2025-11-09 09:07:13.144479285  [2025-11-09 09:07:13] frigate.video                  ERROR   : BackYardWest: Unable to read frames from ffmpeg process.
2025-11-09 09:07:13.144630099  [2025-11-09 09:07:13] frigate.video                  ERROR   : PondCamera: Unable to read frames from ffmpeg process.
2025-11-09 09:07:13.144735966  [2025-11-09 09:07:13] frigate.video                  ERROR   : BackYardWest: ffmpeg process is not running. exiting capture thread...
2025-11-09 09:07:13.144815933  [2025-11-09 09:07:13] frigate.video                  ERROR   : PondCamera: ffmpeg process is not running. exiting capture thread...

Relevant go2rtc log output

2025-11-09 09:05:52.952598646  09:05:52.952 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:05:52.987078279  09:05:52.952 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:02.969320556  09:06:02.960 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:02.992287787  09:06:02.960 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:06:12.987000012  09:06:12.981 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:13.012976333  09:06:12.981 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:06:23.025018470  09:06:23.024 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:06:23.025036262  09:06:23.025 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:33.026668789  09:06:33.026 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:33.048399904  09:06:33.026 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:06:43.086420617  09:06:43.086 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:43.086818539  09:06:43.086 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:06:53.095443861  09:06:53.095 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:06:53.095475994  09:06:53.095 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:07:03.117056937  09:07:03.116 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:07:03.117117024  09:07:03.117 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest
2025-11-09 09:07:13.138676992  09:07:13.137 WRN [rtsp] error="streams: dial tcp 192.168.2.110:554: i/o timeout" stream=PondCamera
2025-11-09 09:07:13.138683151  09:07:13.137 WRN [rtsp] error="streams: dial tcp 192.168.2.111:554: i/o timeout" stream=BackYardWest

FFprobe output from your camera

NA

Frigate stats

cameras	
FrontPorch	
camera_fps	4.1
process_fps	4.1
skipped_fps	0.0JS:0
detection_fps	0.0JS:0
detection_enabled	true
pid	841
capture_pid	896
ffmpeg_pid	902
audio_rms	0.0JS:0
audio_dBFS	0.0JS:0
SideDrive	
camera_fps	4.0JS:4
process_fps	4.0JS:4
skipped_fps	0.0JS:0
detection_fps	0.0JS:0
detection_enabled	true
pid	843
capture_pid	906
ffmpeg_pid	912
audio_rms	0.0JS:0
audio_dBFS	0.0JS:0
BackYardWest	
camera_fps	0.0JS:0
process_fps	0.0JS:0
skipped_fps	0.0JS:0
detection_fps	0.0JS:0
detection_enabled	true
pid	847
capture_pid	916
ffmpeg_pid	59744
audio_rms	0.0JS:0
audio_dBFS	0.0JS:0
PondCamera	
camera_fps	0.0JS:0
process_fps	0.0JS:0
skipped_fps	0.0JS:0
detection_fps	0.0JS:0
detection_enabled	true
pid	866
capture_pid	926
ffmpeg_pid	59743
audio_rms	0.0JS:0
audio_dBFS	0.0JS:0
PackingRoomEve	
camera_fps	5.1
process_fps	5.1
skipped_fps	0.0JS:0
detection_fps	7.5
detection_enabled	true
pid	885
capture_pid	936
ffmpeg_pid	943
audio_rms	0.0JS:0
audio_dBFS	0.0JS:0
detectors	
ov_1	
inference_speed	11.56
detection_start	0.0JS:0
pid	760
detection_fps	7.5
embeddings	{}
gpu_usages	
intel-vaapi	
gpu	"0.0%"
mem	"-%"
clients	
760	"0.0%"
902	"0.0%"
912	"0.0%"
943	"0.0%"
cpu_usages	
1	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/package/admin/s6/command/s6-svscan -d4 -- /run/service"
17	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise s6-linux-init-shutdownd"
18	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/package/admin/s6-linux-init/command/s6-linux-init-shutdownd -d3 -c /run/s6/basedir -g 3000 -C -B"
27	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise s6rc-oneshot-runner"
28	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise s6rc-fdholder"
29	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise certsync"
30	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise certsync-log"
31	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise frigate"
32	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise frigate-log"
33	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise go2rtc"
34	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise go2rtc-healthcheck"
35	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise go2rtc-log"
36	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise nginx"
37	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-supervise nginx-log"
48	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/package/admin/s6/command/s6-ipcserverd -1 -- /package/admin/s6/command/s6-ipcserver-access -v0 -E -l0 -i data/rules -- /package/admin/s6/command/s6-sudod -t 30000 -- /package/admin/s6-rc/command/s6-rc-oneshot-run -l ../.. --"
49	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/package/admin/s6-2.13.2.0/command/s6-fdholderd -1 -n 256 -i data/rules"
94	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-log -b -- T 1 n0 s10000000 T /dev/shm/logs/nginx"
96	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-log -b -- T 1 n0 s10000000 T /dev/shm/logs/go2rtc"
100	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-log -b -- T 1 n0 s10000000 T /dev/shm/logs/frigate"
101	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"s6-log -b -- T 1 n0 s10000000 T /dev/shm/logs/certsync"
128	
cpu	"3.4"
cpu_average	"3"
mem	"0.1"
cmdline	"/usr/local/go2rtc/bin/go2rtc -config=/dev/shm/go2rtc.yaml"
136	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"bash ./run.user go2rtc-healthcheck"
137	
cpu	"8.9"
cpu_average	"4"
mem	"2.6"
cmdline	"python3 -u -m frigate"
143	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: master process nginx"
217	
cpu	"0.1"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: worker process"
218	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: worker process"
219	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: worker process"
220	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: worker process"
280	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"nginx: cache manager process"
401	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"bash ./run.user certsync"
439	
cpu	"0.0"
cpu_average	"0"
mem	"0.6"
cmdline	"python3 -u -m frigate"
735	
cpu	"1.5"
cpu_average	"2"
mem	"0.8"
cmdline	"frigate.recording_manager"
746	
cpu	"0.3"
cpu_average	"0"
mem	"0.7"
cmdline	"frigate.review_segment_manager"
760	
cpu	"5.1"
cpu_average	"2"
mem	"1.1"
cmdline	"frigate.detector.ov_1"
776	
cpu	"1.4"
cpu_average	"1"
mem	"0.8"
cmdline	"frigate.output       "
787	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 2592x1944 -i pipe: -threads 1 -f mpegts -s 960x720 -codec:v mpeg1video -q 8 -bf 0 pipe:"
794	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 2592x1944 -i pipe: -threads 1 -f mpegts -s 960x720 -codec:v mpeg1video -q 8 -bf 0 pipe:"
801	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 1280x720 -i pipe: -threads 1 -f mpegts -s 1280x720 -codec:v mpeg1video -q 8 -bf 0 pipe:"
808	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 1280x720 -i pipe: -threads 1 -f mpegts -s 1280x720 -codec:v mpeg1video -q 8 -bf 0 pipe:"
815	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 3840x2160 -i pipe: -threads 1 -f mpegts -s 1280x720 -codec:v mpeg1video -q 8 -bf 0 pipe:"
822	
cpu	"0.0"
cpu_average	"0"
mem	"0.2"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -threads 1 -f rawvideo -pix_fmt yuv420p -video_size 1920x1080 -i pipe: -threads 1 -f mpegts -s 1920x1080 -codec:v mpeg1video -q 8 -bf 0 pipe:"
841	
cpu	"0.8"
cpu_average	"1"
mem	"0.9"
cmdline	"frigate.process:FrontPorch"
843	
cpu	"1.7"
cpu_average	"8"
mem	"0.9"
cmdline	"frigate.process:SideDrive"
847	
cpu	"0.0"
cpu_average	"0"
mem	"0.7"
cmdline	"frigate.process:BackYardWest"
866	
cpu	"0.0"
cpu_average	"0"
mem	"0.7"
cmdline	"frigate.process:PondCamera"
885	
cpu	"65.0"
cpu_average	"30"
mem	"0.9"
cmdline	"frigate.process:PackingRoomEve"
896	
cpu	"2.5"
cpu_average	"2"
mem	"0.8"
cmdline	"frigate.capture:FrontPorch"
902	
cpu	"6.2"
cpu_average	"5"
mem	"0.4"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -hide_banner -loglevel warning -threads 2 -hwaccel_flags allow_profile_mismatch -hwaccel vaapi -hwaccel_device /dev/dri/renderD128 -hwaccel_output_format vaapi -user_agent FFmpeg Frigate/0.16.2-4d58206 -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport tcp -timeout 10000000 -use_wallclock_as_timestamps 1 -i rtsp://127.0.0.1:8554/FrontPorch -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy /tmp/cache/FrontPorch@%Y%m%d%H%M%S%z.mp4 -r 4 -vf fps=4,scale_vaapi=w=2592:h=1944,hwdownload,format=nv12,eq=gamma=1.4:gamma_weight=0.5 -threads 2 -f rawvideo -pix_fmt yuv420p pipe:"
906	
cpu	"2.4"
cpu_average	"2"
mem	"0.8"
cmdline	"frigate.capture:SideDrive"
912	
cpu	"6.0"
cpu_average	"5"
mem	"0.4"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -hide_banner -loglevel warning -threads 2 -hwaccel_flags allow_profile_mismatch -hwaccel vaapi -hwaccel_device /dev/dri/renderD128 -hwaccel_output_format vaapi -user_agent FFmpeg Frigate/0.16.2-4d58206 -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport tcp -timeout 10000000 -use_wallclock_as_timestamps 1 -i rtsp://127.0.0.1:8554/SideDrive -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy /tmp/cache/SideDrive@%Y%m%d%H%M%S%z.mp4 -r 4 -vf fps=4,scale_vaapi=w=2592:h=1944,hwdownload,format=nv12,eq=gamma=1.4:gamma_weight=0.5 -threads 2 -f rawvideo -pix_fmt yuv420p pipe:"
916	
cpu	"0.0"
cpu_average	"0"
mem	"0.8"
cmdline	"frigate.capture:BackYardWest"
926	
cpu	"0.0"
cpu_average	"0"
mem	"0.8"
cmdline	"frigate.capture:PondCamera"
936	
cpu	"4.1"
cpu_average	"4"
mem	"0.8"
cmdline	"frigate.capture:PackingRoomEve"
943	
cpu	"11.1"
cpu_average	"10"
mem	"0.5"
cmdline	"/usr/lib/ffmpeg/7.0/bin/ffmpeg -hide_banner -loglevel warning -threads 2 -hwaccel_flags allow_profile_mismatch -hwaccel vaapi -hwaccel_device /dev/dri/renderD128 -hwaccel_output_format vaapi -user_agent FFmpeg Frigate/0.16.2-4d58206 -avoid_negative_ts make_zero -fflags +genpts+discardcorrupt -rtsp_transport tcp -timeout 10000000 -use_wallclock_as_timestamps 1 -i rtsp://127.0.0.1:8554/PackingRoomEve -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy /tmp/cache/PackingRoomEve@%Y%m%d%H%M%S%z.mp4 -r 5 -vf fps=5,scale_vaapi=w=3840:h=2160,hwdownload,format=nv12,eq=gamma=1.4:gamma_weight=0.5 -threads 2 -f rawvideo -pix_fmt yuv420p pipe:"
59812	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"sleep 60"
59816	
cpu	"0.0"
cpu_average	"0"
mem	"0.0"
cmdline	"sleep 30s"
frigate.full_system	
cpu	"17.8"
mem	"69.9"
service	
uptime	8173
version	"0.16.2-4d58206"
latest_version	"0.16.2"
storage	
/media/frigate/recordings	
total	26699795.9
used	12304096.8
free	14395699.1
mount_type	"fuse.shfs"
/media/frigate/clips	
total	1889280.0JS:1889280
used	166988.4
free	1722291.6
mount_type	"fuse.shfs"
/tmp/cache	
total	9536.7
used	38.3
free	9498.5
mount_type	"tmpfs"
/dev/shm	
total	1024.0JS:1024
used	845.8
free	178.2
mount_type	"tmpfs"
temperatures	
apex_0	37.8
apex_1	39.05
last_updated	1762709218
processes	
recording	
pid	735
review_segment	
pid	746
go2rtc	
pid	128

Install method

Docker Compose

docker-compose file or Docker CLI command

Unraid Frigate Community APP

Object Detector

OpenVino

Network connection

Wired

Camera make and model

Various

Screenshots of the Frigate UI's System metrics pages

Any other information that may be helpful

unraid-diagnostics-20251109-0908.zip

NickM-27 · 2025-11-10T12:36:43Z

NickM-27
Nov 10, 2025
Collaborator Sponsor

All of my Unraid issues were due to the network driver used for docker, I use ipvlan now and things have been solid. Other than that, it is difficult to know why it might be locked up without some indicator of what is using CPU. How do you restart Frigate if not able to access Unraid?

3 replies

nickcmeyer Nov 11, 2025
Author

I think I'm already on IPVLAN. I'll verify when I can but currently I have Putty running HTOP so that hopefully it will indicate the offending process when it loses connection. I don't want to "reset the clock" until it fails again and it looks like that setting isn't displayed until I turn off docker and VMS.

For whatever reason the Frigate interface works fairly well even when the Unraid interface is completely unresponsive. Even Putty times out. But since I can get to the Frigate web page I can restart it through there and Unraid goes right back to business as usual.

NickM-27 Nov 11, 2025
Collaborator Sponsor

Then you can access Frigate's /api/stats and see CPU usages per process

nickcmeyer Nov 11, 2025
Author

I took a look at my random Notepad++ unsaved documents and realized I did snag a HTOP output at some point. Not sure how helpful it actually is beyond pointing out a generic Docker issue.

[Main] [I/O]
    PID USER       PRI  NI  VIRT   RES   SHR S  CPU%▽MEM%   TIME+  Command
  17890 root        20   0 8121M  190M     0 R  44.6  0.6  0:00.70 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1525810 root        20   0 8121M  190M     0 S  41.3  0.6  2h10:41 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  17863 root        20   0 8121M  190M     0 R  40.6  0.6  0:00.70 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  18931 root        20   0 8121M  190M     0 S  40.0  0.6 34:43.03 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
3339829 root        20   0 8121M  190M     0 S  39.3  0.6 53:03.99 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 236458 root        20   0 8121M  190M     0 S  37.4  0.6  0:22.28 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
2841797 root        20   0 8121M  190M     0 R  37.4  0.6  1:49.11 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  17889 root        20   0 8121M  190M     0 R  36.7  0.6  0:00.63 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 937490 root        20   0 8121M  190M     0 R  36.7  0.6  0:02.29 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1303784 root        20   0 8121M  190M     0 R  36.0  0.6  0:40.90 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1007996 root        20   0 8121M  190M     0 R  35.4  0.6  0:19.77 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 810052 root        20   0 8121M  190M     0 R  33.4  0.6  0:29.51 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
3339841 root        20   0 8121M  190M     0 R  33.4  0.6 19:28.91 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
3438731 root        20   0 8121M  190M     0 S  33.4  0.6  0:01.98 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1301962 root        20   0 8121M  190M     0 R  32.8  0.6  0:21.12 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1091186 root        20   0 8121M  190M     0 S  31.5  0.6  0:04.41 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
3438732 root        20   0 8121M  190M     0 R  31.5  0.6  0:01.98 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1304886 root        20   0 8121M  190M     0 R  30.8  0.6  0:25.29 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 629642 root        20   0 8121M  190M     0 S  30.1  0.6  0:19.65 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1093325 root        20   0 8121M  190M     0 S  29.5  0.6  0:04.62 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
3748482 root        20   0 8121M  190M     0 S  29.5  0.6  0:09.48 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1526366 root        20   0 8121M  190M     0 S  28.8  0.6  0:01.46 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 236803 root        20   0 8121M  190M     0 R  27.5  0.6  0:31.44 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1093315 root        20   0 8121M  190M     0 R  27.5  0.6  0:25.44 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
1304121 root        20   0 8121M  190M     0 S  26.2  0.6  0:43.02 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  17862 root        20   0 8121M  190M     0 S  25.6  0.6  0:00.52 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  17755 root        20   0 8121M  190M     0 S  24.2  0.6  0:00.45 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
 432192 root        20   0 8121M  190M     0 R  19.0  0.6  0:31.71 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
  16135 root        20   0 8121M  190M     0 R  14.4  0.6  0:00.30 /usr/bin/dockerd -p /var/run/dockerd.pid --log-opt max-size=50m --log-opt max-file=1 --log-level=fatal --storage-driver=btrfs
   2380 root        20   0 83544  8052  4924 S  11.1  0.0  2h18:55 /usr/sbin/winbindd -D
 119608 root        20   0 1242M 30536     0 S   8.5  0.1  1h33:27 containerd --config /var/run/docker/containerd/containerd.toml --log-level fatal
  17464 root        20   0 1496M 25624     0 S   6.6  0.1  0:02.16 libvirtd -d -l -f /etc/libvirt/libvirtd.conf -p /var/run/libvirt/libvirtd.pid
  13320 root        20   0 21.3G  182M 57884 S   4.6  0.6  4h09:54 node /usr/local/unraid-api/dist/main.js
  17298 root        20   0 1496M 25624  4676 S   3.3  0.1  0:39.41 libvirtd -d -l -f /etc/libvirt/libvirtd.conf -p /var/run/libvirt/libvirtd.pid
  19113 root        20   0 7336M 2178M  9728 S   3.3  6.9 2d02h48m /usr/bin/qemu-system-x86_64 -name guest=HomeAssistant,debug-threads=on -S -object {"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-1-HomeAssistant/master-key.aes"} -blockdev {"driver":"file","filename":"/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"} -blockdev {"node-name":"libvirt-pflash0
   2382 root        20   0 83392  8972  5120 S   2.6  0.0 24:08.12 /usr/sbin/winbindd -D
3444529 root        20   0 13500  5552  4112 S   2.6  0.0  3:14.21 /usr/bin/ttyd -d0 -W -t rendererType canvas -t closeOnDisconnect true -t disableLeaveAlert true -t theme {'background':'black'} -t fontSize 15 -t fontFamily monospace -s9 -om1 -i /var/run/syslog.sock /usr/local/emhttp/webGui/scripts/run_cmd tail -f -n 90 /var/log/syslog
   2359 root        20   0 88356  9496  6312 S   2.0  0.0  4:51.07 /usr/sbin/smbd -D
1173742 root        20   0 12280  9760  3200 R   2.0  0.0  0:28.25 htop
3357549 root        20   0 13500  5856  4416 S   2.0  0.0 11:30.54 /usr/bin/ttyd -d0 -W -t rendererType canvas -t closeOnDisconnect true -t disableLeaveAlert true -t theme {'background':'black'} -t fontSize 15 -t fontFamily monospace -s9 -om1 -i /var/tmp/Frigate-Test.log.sock /usr/local/emhttp/webGui/scripts/run_cmd docker logs -f -n 90 Frigate-Test
3633332 root        20   0  6196  4768  2924 S   2.0  0.0 28:06.30 /bin/bash /usr/local/emhttp/plugins/ca.mover.tuning/age_mover start
  19217 root        20   0 7336M 2178M     0 R   1.3  6.9  8h11:23 /usr/bin/qemu-system-x86_64 -name guest=HomeAssistant,debug-threads=on -S -object {"qom-type":"secret","id":"masterKey0","format":"raw","file":"/var/lib/libvirt/qemu/domain-1-HomeAssistant/master-key.aes"} -blockdev {"driver":"file","filename":"/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd","node-name":"libvirt-pflash0-storage","auto-read-only":true,"discard":"unmap"} -blockdev {"node-name":"libvirt-pflash0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

[Support]: Very High CPU Usage Periodically Locks Up Unraid #20862

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Replies: 1 comment 3 replies

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{title}}

Uh oh!

Uh oh!

{{editor}}'s edit

{{editor}}'s edit

Uh oh!

Select a reply

Uh oh!

Uh oh!

[Support]: Very High CPU Usage Periodically Locks Up Unraid #20862

Uh oh!

Uh oh!

nickcmeyer Nov 9, 2025

Describe the problem you are having

Version

What browser(s) are you using?

Frigate config file

Relevant Frigate log output

Relevant go2rtc log output

FFprobe output from your camera

Frigate stats

Install method

docker-compose file or Docker CLI command

Object Detector

Network connection

Camera make and model

Screenshots of the Frigate UI's System metrics pages

Any other information that may be helpful

Replies: 1 comment · 3 replies

Uh oh!

NickM-27 Nov 10, 2025 Collaborator Sponsor

Uh oh!

nickcmeyer Nov 11, 2025 Author

Uh oh!

NickM-27 Nov 11, 2025 Collaborator Sponsor

Uh oh!

Uh oh!

nickcmeyer Nov 11, 2025 Author

nickcmeyer
Nov 9, 2025

Replies: 1 comment 3 replies

NickM-27
Nov 10, 2025
Collaborator Sponsor

nickcmeyer Nov 11, 2025
Author

NickM-27 Nov 11, 2025
Collaborator Sponsor

nickcmeyer Nov 11, 2025
Author