Model converted by x3d-tidy views correctly in Sunrize, but not CMV

[coderextreme]

Please try to view this model in castle-model-viewer or report problem with model.

I’m trying to get this model viewing in general (beyond Sunrize). I don’t know if it validates yet, so please be patient as I do that sometime today.

It should pass castle model viewer checks.

https://github.com/coderextreme/HAnimUtilityKit/blob/main/WalkingAlienFinalOutputX_ITE.x3dv

Thanks!

[michaliskambi]

The viewer doesn't report any problem, and castle-model-converter --validate WalkingAlienFinalOutputX_ITE.x3dv goes OK.

However the animation looks very weird / buggy. I understand the animation is correct in Sunrize, so this requires investigation -- and may be some bug on our side.

[coderextreme]

Thanks for your efforts, and Joe thanks you, too! John

…

On Mon, Sep 1, 2025 at 5:46 PM Michalis Kamburelis ***@***.***> wrote: *michaliskambi* left a comment (castle-engine/castle-model-viewer#118) <#118 (comment)> The viewer doesn't report the problem but the animation looks very weird / buggy. I understand the animation is correct in Sunrize, so this requires investigation -- and may be some bug on our side. — Reply to this email directly, view it on GitHub <#118 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFMJ536GXRE35H35HMP4ST3QTEFFAVCNFSM6AAAAACFLLW4NSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTENBTGM2DMMBVHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[coderextreme]

Maybe try some of the other animations in the file to see if they are better. I understand that not all Joints probably have the exact right DEFs, but AFAIK, that didn’t stop me before. John

…

On Mon, Sep 1, 2025 at 5:46 PM Michalis Kamburelis ***@***.***> wrote: *michaliskambi* left a comment (castle-engine/castle-model-viewer#118) <#118 (comment)> The viewer doesn't report the problem but the animation looks very weird / buggy. I understand the animation is correct in Sunrize, so this requires investigation -- and may be some bug on our side. — Reply to this email directly, view it on GitHub <#118 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAFMJ536GXRE35H35HMP4ST3QTEFFAVCNFSM6AAAAACFLLW4NSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTENBTGM2DMMBVHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[coderextreme]

One important point is, this is the only .glTF model I am converting. I can try converting more .glTF models with Holger’s x3d-tidy. Maybe that might narrow the issue? I might have some old models here, on my old machine: https://github.com/coderextreme/HAnimDecoratorAssembly <https://github.com/coderextreme/HAnimDecoratorAssembly/blob/main/convertGramps.sh> / They are huge, compared to WalkingAlien.gltf. I can set up GItHub LFS and check them in. John

…

On Mon, Sep 1, 2025 at 6:14 PM John Carlson ***@***.***> wrote: Maybe try some of the other animations in the file to see if they are better. I understand that not all Joints probably have the exact right DEFs, but AFAIK, that didn’t stop me before. John On Mon, Sep 1, 2025 at 5:46 PM Michalis Kamburelis < ***@***.***> wrote: > *michaliskambi* left a comment (castle-engine/castle-model-viewer#118) > <#118 (comment)> > > The viewer doesn't report the problem but the animation looks very weird > / buggy. > > I understand the animation is correct in Sunrize, so this requires > investigation -- and may be some bug on our side. > > — > Reply to this email directly, view it on GitHub > <#118 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AAFMJ536GXRE35H35HMP4ST3QTEFFAVCNFSM6AAAAACFLLW4NSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTENBTGM2DMMBVHE> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[coderextreme]

It appears that this model has only translations, no centers for Joints! I will work on a translation to center mapping. John

…

On Mon, Sep 1, 2025 at 6:23 PM John Carlson ***@***.***> wrote: One important point is, this is the only .glTF model I am converting. I can try converting more .glTF models with Holger’s x3d-tidy. Maybe that might narrow the issue? I might have some old models here, on my old machine: https://github.com/coderextreme/HAnimDecoratorAssembly <https://github.com/coderextreme/HAnimDecoratorAssembly/blob/main/convertGramps.sh> / They are huge, compared to WalkingAlien.gltf. I can set up GItHub LFS and check them in. John On Mon, Sep 1, 2025 at 6:14 PM John Carlson ***@***.***> wrote: > Maybe try some of the other animations in the file to see if they are > better. > > I understand that not all Joints probably have the exact right DEFs, but > AFAIK, that didn’t stop me before. > > John > > On Mon, Sep 1, 2025 at 5:46 PM Michalis Kamburelis < > ***@***.***> wrote: > >> *michaliskambi* left a comment (castle-engine/castle-model-viewer#118) >> <#118 (comment)> >> >> The viewer doesn't report the problem but the animation looks very weird >> / buggy. >> >> I understand the animation is correct in Sunrize, so this requires >> investigation -- and may be some bug on our side. >> >> — >> Reply to this email directly, view it on GitHub >> <#118 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AAFMJ536GXRE35H35HMP4ST3QTEFFAVCNFSM6AAAAACFLLW4NSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZTENBTGM2DMMBVHE> >> . >> You are receiving this because you authored the thread.Message ID: >> ***@***.***> >> >

[coderextreme]

The translation to center mapping works, plus I default translation and rotation in HAnimJoints.