Els27 v5 cannot find device

[busheyko]

Cannot find the required xml for the blocks when polling can in 3.03 and 3.04
When starting app, I selected both els27 and obdlink SX.The result is the same, does not find the required devices.
Drives for els27 install and work with pyren and Renolink.

ecu_ddt.txt

elm_ddt.txt

[Furtif]

v5 ?

[busheyko]

Yes, and it has can in 12-13 pin.
https://els27.ru/index.php?route=product/product&product_id=78

[Furtif]

try #1476

[busheyko]

@busheyko How about trying PyREN and see if it will work? - also ELS27? - why not use a ELM327 with correct PIC in it?

Yes, with pyren works

[busheyko]

for example this DB #912

Я use this base.

[busheyko]

try https://github.com/cedricp/ddt4all/releases/tag/v3.0.5-rc1

After testing, I will write to you about the result.

[busheyko]

Automatic ECU recognition did not work.
It works in version 5.6 (old version).
ELS27 v5 has two buses on 6-14 and on 12-13.
Main bus on 6-14.
Multimedia on 12-13.
It would be nice to add a switch to select the bus.
I can request information from the developer which command switches the reading of the bus from the main to the additional one.

[busheyko]