User_Setup.h

#define USER_SETUP_INFO "My_User_Setup"

//#define ST7789_2_DRIVER

#define ST7789_DRIVER 

#define TFT_RGB_ORDER TFT_RGB

#define TFT_WIDTH   240
#define TFT_HEIGHT  340

//#define TFT_MOSI    21  // aka SDA
//#define TFT_SCLK    22  // aka SCL
//#define TFT_CS      12  // Chip select control pin
//#define TFT_DC      35  // Data Command control pin
//#define TFT_RST     34   // Reset pin (could connect to Arduino RESET pin)
//#define TFT_MISO    19  // "For some reason DMA requires that a MISO pin is defined" - https://github.com/Bodmer/TFT_eSPI/discussions/2233


//#define TFT_MISO 19
#define TFT_MOSI 23 	// aka SDA
#define TFT_SCLK 18 	// aka SCL
#define TFT_CS 22 	// Chip select control pin
#define TFT_DC 21 	// Data Command control pin
#define TFT_RST 12 	// Reset pin (could connect to RST pin)



//#define TFT_MISO 19
//#define TFT_MOSI 23 	// aka SDA
//#define TFT_SCLK 18 	// aka SCL
//#define TFT_CS 5 	// Chip select control pin
//#define TFT_DC 2 	// Data Command control pin
//#define TFT_RST 4 	// Reset pin (could connect to RST pin)


#define LOAD_GLCD     // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2    // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4    // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6    // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7    // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:-.
#define LOAD_FONT8    // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF    // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT

#define SPI_FREQUENCY         27000000
#define SPI_READ_FREQUENCY    20000000
#define SPI_TOUCH_FREQUENCY   2500000