Help for download issues

[TechExplorer-X]

Seeking help, I saw in your project video that you used Esp32-C3 from Hezhou. However, after I successfully burned it through Arduino, the serial port did not output. The Esp32 library confirmed the correct addition, but the serial port did not output any content (with a baud rate of 115200). May I ask how you burned it

[ckcr4lyf]

I used PlatformIO and Visual Studio Code. I'm guessing you tried the Arduino IDE? Can you try PlatformIO once?

[ckcr4lyf]

Make sure this is set in your PlatformIO config if you're not cloning the repo:

EvilAppleJuice-ESP32/platformio.ini

Lines 11 to 15 in 8effcda

	[env:airm2m_core_esp32c3]
	platform = espressif32
	board = airm2m_core_esp32c3
	framework = arduino
	monitor_speed = 115200

[TechExplorer-X]

我使用了 PlatformIO 和 Visual Studio Code。我猜你试过Arduino IDE？您可以尝试一次 PlatformIO 吗？

Yes, I tried the Arduino IDE, but unfortunately it didn't work, which drove me crazy. I haven't used PlatformIO before, but I will follow your advice and give it a try. Thank you very much for your help

[ckcr4lyf]

I'll also try and make a video tutorial in the future for new users.

[TechExplorer-X]

我将来还会尝试为新用户制作视频教程。

I'm looking forward to it. Thank you

[sht2017]

我将来还会尝试为新用户制作视频教程。

I'm looking forward to it. Thank you

The core of the repository does not use any hardware-specific code (on certain models or variants of esp32), so I guess you may eventually find out how to compile and run the project. If you have encountered any problems please tell me and I'm glad to help :)

[TechExplorer-X]

我将来还会尝试为新用户制作视频教程。

我很期待。谢谢

存储库的核心不使用任何特定于硬件的代码（在 esp32 的某些型号或变体上），所以我想你最终可能会找到如何编译和运行项目。如果您遇到任何问题，请告诉我，我很乐意为您提供帮助:)

Thank you, I have solved it. It seems that the Esp32-C3 of Hezhou is not friendly to the Arduino IDE download method, but I successfully downloaded it using PlatformI and it has been effective. I would like to express my gratitude to ckcr4lyf for his help and your kind help. Thank you very much!!!

[huang1008686]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1(N16R8),请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

[ckcr4lyf]

@huang1008686

Maybe this can be of help:

• https://community.platformio.org/t/cant-find-esp32-s3-wroom-1-n16r8-16m-flash-8sram/30258
• Add Espressif ESP32-S3-DevKitC-1-N16R8V board file platformio/platform-espressif32#921 (comment)

I don't have the exact board so I cannot be sure.

[sht2017]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1(N16R8),请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

Try it, you can simply copy and paste it to the file platform.ini located in the same path of the repository and open the project in PlatformIO.

platform.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200

[TechExplorer-X]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1（N16R8），请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

尝试一下

平台.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200

我觉得你可以试试通过arduion来进行烧录，因为它具有esp32-S3的库

[sht2017]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1（N16R8），请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

尝试一下

平台.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200

我觉得你可以试试通过arduion来进行烧录，因为它具有esp32-S3的库

I think so.
But considering uncertainty, using Platformio might still be the best solution here.
Btw, I am using esp32-s3 with it and it's fine once you apply the previous config to platform.ini.

Best Regards

[huang1008686]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1（N16R8），请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

尝试一下

平台.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200

我觉得你可以试试通过arduion来进行烧录，因为它具有esp32-S3的库

感谢前辈的回复
用arduino烧录会出现不少问题，库的路径引用总是有问题，这次修改选对板子直接用platform烧录就成功了

[huang1008686]

寻求帮助，您好，我是初学者，手上的板子是ESP32-S3-WROOM-1（N16R8），请问在VSCode+platformIO新建选择板子应该选哪个，没有我说的这个板子可以选，工程文件里面的platform.ino需要修改吗，试了好多次无法成功烧录，希望能得到一丝帮助，十分感谢

尝试一下

平台.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:esp32-s3-devkitc-1]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
monitor_speed = 115200

我觉得你可以试试通过arduion来进行烧录，因为它具有esp32-S3的库

我认为如此。但考虑到不确定性，使用 Platformio 可能仍然是最好的解决方案。顺便说一句，我正在使用 esp32-s3，一旦您将之前的配置应用于平台 .ini，它就很好了。

此致敬意

非常感谢您的回复
昨晚在作者发的论坛中给了我很大的思路，板子选择这款可以在platformio中烧录了，加上前辈您发了修改的ino文件，成功烧录，但貌似发射距离不能超过一米，不知道是不是功率还是延时问题，变慢了

此致敬意

[huang1008686]

@huang1008686

也许这会有所帮助：

• https://community.platformio.org/t/cant-find-esp32-s3-wroom-1-n16r8-16m-flash-8sram/30258
• 新增乐鑫 ESP32-S3-DevKitC-1-N16R8V 开发板文件 platformio/platform-espressif32#921 （注释）

我没有确切的电路板，所以我不能确定。

感谢您的回复
您发的链接给了我莫大的帮助，已经成功烧录
此致敬意