Support for Fujitsu AR-RPB1U remote

[michaelcadilhac]

I have a Fujitsu Halcyon ASUH12LPAS controlled by a remote with model code AR-RPB1U.

Reading the signals sent with IRrecvDumpV3, I obtain a hodgepodge of model numbers.

• Setting temperature:

Protocol  : FUJITSU_AC
Code      : 0x1463001010FE09318804000000002023 (128 Bits)
Mesg Desc.: Model: 6 (ARREW4E), Id: 0, Power: On, Mode: 4 (Heat), Temp: 25C, Fan: 0 (Auto), 10C Heat: Off, Swing: 0 (Off), Command: N/A, Outside Quiet: Off, Timer: Off

• Setting mode:

Protocol  : FUJITSU_AC
Code      : 0x1463001010FE09318800000000002027 (128 Bits)
Mesg Desc.: Model: 6 (ARREW4E), Id: 0, Power: On, Mode: 0 (Auto), Temp: 25C, Fan: 0 (Auto), 10C Heat: Off, Swing: 0 (Off), Command: N/A, Outside Quiet: Off, Timer: Off

• Setting Fan Speed:

Protocol  : FUJITSU_AC
Code      : 0x1463001010FE09318800040000002023 (128 Bits)
Mesg Desc.: Model: 6 (ARREW4E), Id: 0, Power: On, Mode: 0 (Auto), Temp: 25C, Fan: 4 (Quiet), 10C Heat: Off, Swing: 0 (Off), Command: N/A, Outside Quiet: Off, Timer: Off

• Using "powerful" mode:

Protocol  : FUJITSU_AC
Code      : 0x146300101039C6 (56 Bits)
Mesg Desc.: Model: 3 (ARREB1E), Id: 0, Power: On, Command: Powerful

• Swing toggle (only vertical):

Protocol  : FUJITSU_AC
Code      : 0x1463001010FE09318800140000002013 (128 Bits)
Mesg Desc.: Model: 6 (ARREW4E), Id: 0, Power: On, Mode: 0 (Auto), Temp: 25C, Fan: 4 (Quiet), 10C Heat: Off, Swing: 1 (Swing(V)), Command: N/A, Outside Quiet: Off, Timer: Off

• Setting swing opening:

Protocol  : FUJITSU_AC
Code      : 0x14630010106C93 (56 Bits)
Mesg Desc.: Model: 1 (ARRAH2E), Id: 0, Power: On, Command: Step Swing(V)

• Economy mode:

Protocol  : FUJITSU_AC
Code      : 0x146300101009F6 (56 Bits)
Mesg Desc.: Model: 3 (ARREB1E), Id: 0, Power: On, Command: Econo

Question: Does this warrant creating a new model number in IRremoteESP8266, or should an application bounce between models (setModel) before doing this or that?

[crankyoldgit]

Yes, it bounces between models.
Fujitsu uses protocols that have common messages between models. So, often the library can't tell from a single message what kind of remote/AC you have.
As you a feature that is more model specific, it can tell more of what model it must be.

I'd try Model 6: ARREW4E for your remote.