No Host DNS record found #1031
Description
Have you already looked into this bug?
- I have checked the Troubleshooting Guide
- I have checked Release notes for potential migration steps
- I have checked existing issues for similar bugs
- I have googled this bug already with no luck
- I have not done any of the above
(Optional) Error message
No response
What went wrong?
ERR
Expected behaviour
OK status
How can we reproduce the bug?
docker-compose stop && docker-compose rm -f && docker-compose up -d
Host Operating System
macOS
Host Platform (amd64, arm64, other)
arm64
(Linux only) Is SELinux enabled?
I don't know
Docker version
Docker version 24.0.5, build ced0996
Docker Compose version
Docker Compose version v2.20.2-desktop.1
Devilbox version
master
Have you removed stopped containers before starting?
Yes
Have you pulled latest Docker images before starting?
Yes
Devilbox start command
docker-compose up httpd php mysql
Config: .env file
###
### ---------------------------------------------------
### D E V I L B O X R U N - T I M E S E T T I N G S
### ---------------------------------------------------
###
### All the following settings are applied during
### $ docker-compose up
###
### No need to rebuild any docker images!
###
### IMPORTANT:
### ----------
### When changing any values ensure to stop, rm and restart:
### $ docker-compose stop
### $ docker-compose rm -f
### $ docker-compose up
###
### NOTE:
### -----
### For you own custom variables, scroll to the bottom
###
# The following line will disable any shellcheck warnings throughout this file
# shellcheck disable=SC2034,SC2125
###
### Show all executed commands in each
### docker image during docker-compose up?
###
### 0: Quiet
### 1: Verbose
### 2: More verbose
DEBUG_COMPOSE_ENTRYPOINT=2
###
### Log to file or Docker logs.
###
### Logging to file means log files are available under log/
### on your host operating system.
### Logging to Docker logs means log files are streamed to
### stdout and stderr.
###
### 1: Log to Docker logs
### 0: Log to file
###
DOCKER_LOGS=0
###
### Relative or absolute path to the devilbox repository.
### (Used as a prefix for all mount paths)
### There is no need to change this.
###
### The only exception is for OSX users wanting to use NFS
### mounts instead of Filesystem mounts due to degraded performance
### on OSX.
###
### Note: When changing this variable you must re-create the container.
### Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
DEVILBOX_PATH=.
###
### At what IP address should the docker services listen
### on the Host computer?
###
### The specified default should be fine for Linux and OSX (127.0.0.1:).
### If you are on windows, you will probably have to change
### it to the IP address of the docker machine.
###
### a.) Leave blank, to listen on all interfaces (no trailing colon ':')
### LOCAL_LISTEN_ADDR=
### b.) If an IP is specified, note the trailing colon ':'
### LOCAL_LISTEN_ADDR=127.0.0.1:
###
LOCAL_LISTEN_ADDR=
###
### This is the domain suffix your projects will be made available
### with mass-virtual-hosting.
### It is also required for the internal DNS server to be setup.
###
### Note: In addition to period or dot character ('.'), only ALPHA ([a-zA-Z]+) characters are supported.
### Mac users should not use the .local TLD, as this will not resolve properly due Apple's
### use of Multicast DNS.##
###
### Example:
### TLD_SUFFIX=loc
### Makes your project available under xxxx.loc
###
### Example:
### TLD_SUFFIX=local
### Makes your project available under xxxx.local
###
TLD_SUFFIX=loc
###
### Optional DNS configuration
### Allows you to add extra DNS records (above the wildcard entry)
### Useful if your host computer run other Docker services that you want to connect to or reach
### from within the Devilbox network by a custom hostname.
###
### Format:
### -------
### Resolve any custom defined hostname to an IP address (useable inside container and host os)
### EXTRA_HOSTS=<hostname>=<ip>[,<hostname>=<ip>]
###
### Resolve any custom defined hostname to whatever IP address a CNAME resolves to
### (Useable inside the container and host OS).
### Note: CNAME must be resolvable by Google DNS
### EXTRA_HOSTS=<hostname>=<CNAME>[,<hostname>=<CNAME>]
###
### Examples:
### ---------
### EXTRA_HOSTS=hostname.loc=1.2.3.4
### EXTRA_HOSTS=host.loc=1.2.3.4,host.example.org=3.4.5.6
EXTRA_HOSTS=
###
### Set your user id and group id
###
### This should be changed to the value of your local
### users uid and gid
###
### Type `id` on the terminal to find out your values
###
NEW_UID=1000
NEW_GID=1000
###
### Timezone for PHP Docker container (system and php.ini)
###
TIMEZONE=UTC
################################################################################
###
### INTRANET SETTINGS
###
################################################################################
###
### TLD_SUFFIX domains are checked if they are set in the
### host computer /etc/hosts or available via attached DNS server.
### Timeout is done on vhosts.php (intranet) via ajax calls.
### In order to keep performance, set this to a low value.
### DNS checks might not succeed in time on slow machines.
### If DNS is valid, but timeout is expired, set this to a higher value.
###
### DNS_CHECK_TIMEOUT value is how many seconds to time out
### Default is to timeout after 1 second (DNS_CHECK_TIMEOUT=1)
###
DNS_CHECK_TIMEOUT=1
###
### Devilbox UI SSL Certificate generation
###
### When using SSL each certificate requires names for which it is responsible:
### Common Name as well as alternative names.
###
### Specify comma separated hostnames below by which you want to access the Devilbox.
### Those hostnames will be included in the SSL certificate for the Devilbox intranet.
### This has nothing to do for SSL certificates for projects, it is just for the intranet
### itself.
###
DEVILBOX_UI_SSL_CN=localhost,*.localhost,devilbox,*.devilbox,httpd
###
### Devilbox UI Password protection enable/disable (1/0)
###
### Set DEVILBOX_UI_PROTECT to 1 in order to password protect the
### intranet.
###
### Example:
### DEVILBOX_UI_PROTECT=1
### DEVILBOX_UI_PROTECT=0
###
DEVILBOX_UI_PROTECT=0
###
### Devilbox UI Password
###
### When DEVILBOX_UI_PROTECT=1, use the following password
### to log in. The password can always be changed.
### When changing the password, make sure to restart your
### PHP container.
###
### Example:
### DEVILBOX_UI_PASSWORD=my-very-secure-password
### DEVILBOX_UI_PASSWORD=Some pass with spaces
###
### The default username is 'devilbox'
###
DEVILBOX_UI_PASSWORD=password
###
### Enable the Devilbox Intranet?
###
### Example:
### DEVILBOX_UI_ENABLE=1
### DEVILBOX_UI_ENABLE=0
###
DEVILBOX_UI_ENABLE=1
DEBUG_ENTRYPOINT=2
DEVILBOX_HTTPD_MGMT_USER=supervisord
DEVILBOX_HTTPD_MGMT_PASS=mypassword
HTTPD_BACKEND_TIMEOUT=180
###
### Automatically be logged in into phpMyAdmin
###
### Example:
### DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1
### DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1
###
### Automatically be logged in into phpPgAdmin
###
### Example:
### DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1
### DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1
################################################################################
###
### 1. Choose Images (Version)
###
################################################################################
###
### You can choose any combination of httpd, mysql, postgresql or php.
### Each of them are fully compatible between one another.
###
###
### 1.1 Choose PHP Server Image
###
### Note: PHP 5.2 is not officially supported. Intranet won't work (due to lack of namespace support).
### PHP 5.2 only works with Apache 2.4, Nginx stable and Nginx mainline.
### Use at your own risk.
###
#PHP_SERVER=5.2
#PHP_SERVER=5.3
#PHP_SERVER=5.4
#PHP_SERVER=5.5
#PHP_SERVER=5.6
#PHP_SERVER=7.0
#PHP_SERVER=7.1
#PHP_SERVER=7.2
# #PHP_SERVER=7.3
PHP_SERVER=7.4
#PHP_SERVER=8.0
#PHP_SERVER=8.1
#PHP_SERVER=8.2
###
### 1.2 Choose HTTPD Server Image
###
### Choose between 'debian' or 'alpine' flavour and then select the version
###
### Note: apache-2.2 has no arm64 support on 'alpine' flavour
###
HTTPD_FLAVOUR=alpine
#HTTPD_SERVER=apache-2.2
#HTTPD_SERVER=apache-2.4
HTTPD_SERVER=nginx-stable
#HTTPD_SERVER=nginx-mainline
###
### 1.3 Choose MySQL Server Image
###
#MYSQL_SERVER=mysql-5.5
#MYSQL_SERVER=mysql-5.6
#MYSQL_SERVER=mysql-5.7
#MYSQL_SERVER=mysql-8.0
#MYSQL_SERVER=percona-5.5
#MYSQL_SERVER=percona-5.6
#MYSQL_SERVER=percona-5.7
#MYSQL_SERVER=percona-8.0
#MYSQL_SERVER=mariadb-5.5
#MYSQL_SERVER=mariadb-10.0
#MYSQL_SERVER=mariadb-10.1
#MYSQL_SERVER=mariadb-10.2
#MYSQL_SERVER=mariadb-10.3
#MYSQL_SERVER=mariadb-10.4
#MYSQL_SERVER=mariadb-10.5
MYSQL_SERVER=mariadb-10.6
#MYSQL_SERVER=mariadb-10.7
#MYSQL_SERVER=mariadb-10.8
###
### 1.4 Choose PostgreSQL Server Image
###
### https://www.postgresql.org/support/versioning/
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
### https://github.com/docker/toolbox/issues/510
###
#
# PostgreSQL without arm64 support
#
#PGSQL_SERVER=9.0
#PGSQL_SERVER=9.1
#PGSQL_SERVER=9.2-alpine
#
# PostgreSQL with arm64 support
#
#PGSQL_SERVER=9.2
#PGSQL_SERVER=9.3
#PGSQL_SERVER=9.3-alpine
#PGSQL_SERVER=9.4
#PGSQL_SERVER=9.4-alpine
#PGSQL_SERVER=9.5
#PGSQL_SERVER=9.5-alpine
#PGSQL_SERVER=9.6
#PGSQL_SERVER=9.6-alpine
#PGSQL_SERVER=10
#PGSQL_SERVER=10-alpine
#PGSQL_SERVER=11
#PGSQL_SERVER=11-alpine
#PGSQL_SERVER=12
#PGSQL_SERVER=12-alpine
#PGSQL_SERVER=13
#PGSQL_SERVER=13-alpine
#PGSQL_SERVER=14
PGSQL_SERVER=14-alpine
#PGSQL_SERVER=latest
#PGSQL_SERVER=alpine
###
### 1.5 Choose Redis Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
### https://github.com/docker/toolbox/issues/510
###
#
# Redis without arm64 support
#
#REDIS_SERVER=2.8
#REDIS_SERVER=3.0
#REDIS_SERVER=3.0-alpine
#
# Redis with arm64 support
#
#REDIS_SERVER=3.2
#REDIS_SERVER=3.2-alpine
#REDIS_SERVER=4.0
#REDIS_SERVER=4.0-alpine
#REDIS_SERVER=5.0
#REDIS_SERVER=5.0-alpine
#REDIS_SERVER=6.0
#REDIS_SERVER=6.0-alpine
#REDIS_SERVER=6.2
REDIS_SERVER=6.2-alpine
#REDIS_SERVER=latest
#REDIS_SERVER=alpine
###
### 1.6 Choose Memcached Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
### https://github.com/docker/toolbox/issues/510
###
#
# Memcached without arm64 support
#
#MEMCD_SERVER=1.4
#MEMCD_SERVER=1.4-alpine
#
# Memcached with arm64 support
#
#MEMCD_SERVER=1.5
#MEMCD_SERVER=1.5-alpine
#MEMCD_SERVER=1.6
MEMCD_SERVER=1.6-alpine
#MEMCD_SERVER=latest
#MEMCD_SERVER=alpine
###
### 1.7 Choose Mongo Server Image
###
### https://www.mongodb.com/evolved
###
#
# MongoDB without arm64 support
#
#MONGO_SERVER=2.8
#MONGO_SERVER=3.0
#MONGO_SERVER=3.2
#
# MongoDB with arm64 support
#
#MONGO_SERVER=3.4
#MONGO_SERVER=3.6
#MONGO_SERVER=4.0
#MONGO_SERVER=4.2
#MONGO_SERVER=4.4
MONGO_SERVER=5.0
#MONGO_SERVER=latest
################################################################################
###
### 2. Host Mounts (Your computer)
###
################################################################################
###
### Global mount options
###
### Note: When adding custom mount options, ensure to start with a
### leading ',' (comma), as those options are prepended to already
### existing mount options.
###
### Note: If no mount options are specified, leave this variable empty
### and do not add a leading ',' (comma).
###
### MOUNT_OPTIONS=,cached
### MOUNT_OPTIONS=
###
### Example: Allow to share mounts accross container with SELINUX enabled
###
### MOUNT_OPTIONS=,z
###
MOUNT_OPTIONS=
###
### Local filesystem path to www projects.
###
### Note: When changing this variable you must re-create the container.
### Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_HTTPD_DATADIR=./data/www
###
### Local filesystem path to where your backups are stored
###
### Note: When changing this variable you must re-create the container.
### Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_BACKUPDIR=./backups
###
### The path on your host OS of the ssh directory to be mounted into the
### PHP container into /home/devilbox/.ssh.
###
### IMPORTANT: The path is mounted read-only to ensure you cannot accidentally
## delete anything inside the php container.
###
HOST_PATH_SSH_DIR=~/.ssh
################################################################################
###
### 3. PHP Docker Settings
###
################################################################################
###
### Enable certain PHP modules which are not enabled by default
###
### Currently the only modules that can be enabled are 'ioncube' and 'blackfire'
### Also ensure to disable xdebug when using any of the above:
### https://xdebug.org/docs/install#compat
###
### PHP_MODULES_ENABLE=ioncube, blackfire
###
PHP_MODULES_ENABLE=
###
### Disable any PHP modules that you don't require
###
### Specify a comma separated list without spaces of modules to disable
###
### PHP_MODULES_DISABLE=xdebug,imagick,swoole
###
PHP_MODULES_DISABLE=oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole
###
### Postfix settings for email catch-all
###
### When set to '1' postfix is normally started and made available. However you still need
### to configure it to your needs yourself. For that you can use the autostart scripts
### and define a couple of 'postconf -e name=value' commands.
###
### When set to '2' (email catch-all), no mail will leave the Devilbox. It is automatically
### internally routed the the devilbox mail account and you can see each sent mail
### in the bundled intranet: https://localhost/mail.php
###
### Values:
### 0: Disable postfix (do not start it)
### 1: Enable/Start postfix
### 2: Enable/Start postfix and enable email catch-all
###
PHP_MAIL_CATCH_ALL=2
###
### Configure everything else about PHP in
### * cfg/php-ini-X.X/*.ini
### * cfg/php-fpm-X.X/*.conf
################################################################################
###
### 4. HTTPD Docker Settings
###
################################################################################
###
### Expose HTTPD Port to Host
###
HOST_PORT_HTTPD=80
HOST_PORT_HTTPD_SSL=443
###
### Globally enable/disable HTTP/2 support
###
### This cannot be done on a per vhost level and must be enabled/disabled globally.
###
### Values:
### * 0: HTTP/2 is disabled
### * 1: HTTP/2 is enabled
###
HTTPD_HTTP2_ENABLE=1
###
### SSL (HTTP/HTTPS) settings for automated vhost generation
###
### By default each project will have two vhosts (one for HTTP and one for HTTPS).
### You can control the SSL settings for your projects via the below stated values.
###
### This is internally achieved via the '-m' argument of https://github.com/devilbox/vhost-gen
###
### Values:
### * both: Serve HTTP and HTTPS for all projects
### * redir: HTTP always redirects to HTTPS
### * ssl: Only serve HTTPS
### * plain: Only serve HTTP
###
HTTPD_VHOST_SSL_TYPE=both
###
### Document Root Subdirectory
###
### In your project directory, which subfolder should
### serve your files?
###
### When changing this value, restart the devilbox.
###
HTTPD_DOCROOT_DIR=htdocs
###
### Per vHost Config Subdirectory
###
### In your project directory, which subfolder should
### hold apache, nginx templates for a customized vhost?
###
### When changing this value, restart the devilbox.
###
HTTPD_TEMPLATE_DIR=.devilbox
###
### Webserver timeout (in seconds) to upstream PHP-FPM server
###
### This value should be greater than PHP's max_execution_time,
### otherwise the php script could still run and the webserver will
### simply drop the connection before getting an answer by PHP.
###
HTTPD_TIMEOUT_TO_PHP_FPM=180
###
### NGINX ONLY
###
### Set worker_processes and worker_connections
###
### https://nginx.org/en/docs/ngx_core_module.html#worker_processes
### https://nginx.org/en/docs/ngx_core_module.html#worker_connections
###
HTTPD_NGINX_WORKER_PROCESSES=auto
HTTPD_NGINX_WORKER_CONNECTIONS=1024
################################################################################
###
### 5. MySQL Docker Settings
###
################################################################################
###
### MySQL root user password
###
### The password is required for the initial creation of the MySQL database
### as well as the Devilbox intranet to display schema and configuration settings.
###
### If you change your MySQL root user password via mysql cli, phpMyAdmin or other tools
### after the database has been created, ensure to adjust the value here accordingly as well.
###
### If you only change this value here after the database has been created,
### the MySQL root user password will not actually be changed and the Devilbox intranet
### won't be able to connect to the MySQL service.
###
MYSQL_ROOT_PASSWORD=
###
### Expose MySQL Port to Host
###
HOST_PORT_MYSQL=3306
################################################################################
###
### 6. PostgreSQL Docker Settings
###
################################################################################
###
### PostgreSQL 'root' user name (usually postgres)
###
PGSQL_ROOT_USER=postgres
###
### PostgreSQL 'root' user password
###
### If you want to set a password, ensure to remove 'trust' from
### PGSQL_HOST_AUTH_METHOD below
###
PGSQL_ROOT_PASSWORD=
###
### In order to not use a password for PostgreSQL, keep this value at 'trust'
###
PGSQL_HOST_AUTH_METHOD=trust
###
### Expose PostgreSQL Port to Host
###
HOST_PORT_PGSQL=5432
################################################################################
###
### 7. Redis Docker Settings
###
################################################################################
###
### Expose Redis Port to Host
###
HOST_PORT_REDIS=6379
###
### Custom startup arguments
###
### Apply custom startup arguments to redis
###
### Example: Password protection
### Add password protection to the Redis server by specifying it should
### require a password.
### Note: Do not add quotes or spaces to the password
###
### REDIS_ARGS=--requirepass my-redis-root-password
###
### Example: Verbosity
###
### REDIS_ARGS=--loglevel verbose
###
REDIS_ARGS=
#REDIS_ARGS=--loglevel verbose --requirepass my-redis-root-password
################################################################################
###
### 8. Memcached Docker Settings
###
################################################################################
###
### Expose Memcached Port to Host
###
HOST_PORT_MEMCD=11211
################################################################################
###
### 9. MongoDB Docker Settings
###
################################################################################
###
### Expose MongoDB Port to Host
###
HOST_PORT_MONGO=27017
################################################################################
###
### 10. Bind Docker Settings
###
################################################################################
###
### Expose Bind Port to Host
###
HOST_PORT_BIND=1053
###
### Add comma separated DNS server from which you want to receive DNS
### You can also add DNS servers from your LAN (if any are available)
###
BIND_DNS_RESOLVER=8.8.8.8,8.8.4.4
###
### Validate DNSSEC
###
### Values:
### no: DNSSEC validation is disabled
### yes: DNSSEC validation is enabled, but a trust anchor must be manually configured.
### auto: DNSSEC validation is enabled, and a default trust anchor for root zone is used.
###
BIND_DNSSEC_VALIDATE=no
###
### Bind timing options (time in seconds)
###
### Leave empty for defaults.
### Only change when you know what you are doing.
###
BIND_TTL_TIME=
BIND_REFRESH_TIME=
BIND_RETRY_TIME=
BIND_EXPIRY_TIME=
BIND_MAX_CACHE_TIME=
###
### Show DNS Queries in Docker logs output?
###
### 1: Yes
### 0: No
BIND_LOG_DNS_QUERIES=0
################################################################################
###
### 11. Custom variables
###
################################################################################
###
### Any variable defined in this file will be available
### as environment variables to your PHP/HHV Docker container.
###
### This might be useful to set application environment and retrieve
### them via: <?php getenv('MY_APPLICATION_ENV'); ?>
###
###
### Example:
### <?php echo getenv('Foo'); ?> would produce: 'some value'
###
#Foo=some valueConfig: docker-compose.override.yml
No response
Config: ./check-config.sh
(base) ➜ devilbox git:(master) bash check-config.sh
# ==============================================================================
# Checking git
# ==============================================================================
[SUCC] git is clean
# ==============================================================================
# Checking .env file
# ==============================================================================
[SUCC] .env file exists
[SUCC] .env file is readable
[SUCC] All variables are present in .env file
[SUCC] No variables is duplicated in .env file
# ==============================================================================
# Checking .env file values
# ==============================================================================
[SUCC] All .env file variables have correct values
# ==============================================================================
# Checking required Devilbox core directories exist
# ==============================================================================
[SUCC] All PHP cfg/ sub directories are present
[SUCC] All PHP log/ sub directories are present
[SUCC] All HTTPD cfg/ sub directories are present
[SUCC] All HTTPD log/ sub directories are present
# ==============================================================================
# Checking devilbox core directory permissions
# ==============================================================================
[SUCC] All devilbox directories have correct permissions
[SUCC] All devilbox directories have correct uid
[SUCC] All devilbox directories have correct gid
# ==============================================================================
# Checking devilbox core file permissions
# ==============================================================================
[SUCC] All devilbox files have correct permissions
[SUCC] All devilbox files have correct uid
[SUCC] All devilbox files have correct gid
# ==============================================================================
# Checking projects permissions
# ==============================================================================
[SUCC] All project dirs have correct permissions
[SUCC] All project dirs have correct uid
[SUCC] All project dirs have correct gid
# ==============================================================================
# Checking projects settings
# ==============================================================================
[SUCC] All projects have valid DNS records
[SUCC] All projects have valid HTTPD_DOCROOT_DIR
# ==============================================================================
# Checking customizations
# ==============================================================================
[INFO] No custom configurations applied
# ==============================================================================
# SUMMARY
# ==============================================================================
[SUCC] Found no errors
[INFO] No custom configurations applied
[INFO] Ensure to run 'docker-compose stop; docker-compose rm -f' on .env changes or custom configsLog: docker-compose logs
(base) ➜ devilbox git:(master) docker-compose logs
devilbox-mysql-1 | 2024-10-20 20:03:54+00:00 [Note] [Entrypoint]: Entrypoint script for MariaDB Server 1:10.6.12+maria~ubu2004 started.
devilbox-mysql-1 | 2024-10-20 20:03:54+00:00 [Note] [Entrypoint]: Switching to dedicated user 'mysql'
devilbox-mysql-1 | 2024-10-20 20:03:54+00:00 [Note] [Entrypoint]: Entrypoint script for MariaDB Server 1:10.6.12+maria~ubu2004 started.
devilbox-mysql-1 | 2024-10-20 20:03:54+00:00 [Note] [Entrypoint]: MariaDB upgrade not required
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] Starting MariaDB 10.6.12-MariaDB-1:10.6.12+maria~ubu2004-log source revision 4c79e15cc3716f69c044d4287ad2160da8101cdc as process 1
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Compressed tables use zlib 1.2.11
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Number of pools: 1
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Using ARMv8 crc32 + pmull instructions
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts)
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Using Linux native AIO
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Initializing buffer pool, total size = 134217728, chunk size = 134217728
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Completed initialization of buffer pool
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: 128 rollback segments are active.
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Creating shared tablespace for temporary tables
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB.
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: 10.6.12 started; log sequence number 13959676127; transaction id 883996
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] Plugin 'FEEDBACK' is disabled.
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] Server socket created on IP: '0.0.0.0'.
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] Server socket created on IP: '::'.
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] mysqld: ready for connections.
devilbox-mysql-1 | Version: '10.6.12-MariaDB-1:10.6.12+maria~ubu2004-log' socket: '/run/mysqld/mysqld.sock' port: 3306 mariadb.org binary distribution
devilbox-mysql-1 | 2024-10-20 20:03:54 0 [Note] InnoDB: Buffer pool(s) load completed at 241020 20:03:54
devilbox-httpd-1 | [INFO] Entrypoint debug: 2
devilbox-httpd-1 | [INFO] Runtime debug: 1
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Environment Variables (set/default)
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Variables: General:
devilbox-httpd-1 | [INFO] Set $NEW_UID Value: 501
devilbox-httpd-1 | [INFO] Set $NEW_GID Value: 20
devilbox-httpd-1 | [INFO] Set $TIMEZONE Value: UTC
devilbox-httpd-1 | [INFO] Variables: Main Vhost:
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_ENABLE Value: 1
devilbox-httpd-1 | [INFO] Unset $MAIN_VHOST_DOCROOT_DIR Default: htdocs
devilbox-httpd-1 | [INFO] Unset $MAIN_VHOST_TEMPLATE_DIR Default: cfg
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_ALIASES_ALLOW Value: /devilbox-api/:/var/www/default/api, /vhost.d/:/etc/httpd
devilbox-httpd-1 | [INFO] Unset $MAIN_VHOST_ALIASES_DENY Default: /\.git, /\.ht.*
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_BACKEND Value: conf:phpfpm:tcp:172.16.238.10:9000
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_BACKEND_TIMEOUT Value: 180
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_SSL_TYPE Value: both
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_SSL_CN Value: localhost,*.localhost,devilbox,*.devilbox,httpd
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_STATUS_ENABLE Value: 1
devilbox-httpd-1 | [INFO] Set $MAIN_VHOST_STATUS_ALIAS Value: /devilbox-httpd-status
devilbox-httpd-1 | [INFO] Variables: Mass Vhost:
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_ENABLE Value: 1
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_DOCROOT_DIR Value: htdocs
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_TEMPLATE_DIR Value: .devilbox
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_ALIASES_ALLOW Value: /devilbox-api/:/var/www/default/api:http(s)?://(.*)$
devilbox-httpd-1 | [INFO] Unset $MASS_VHOST_ALIASES_DENY Default: /\.git, /\.ht.*
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_BACKEND Value: conf:phpfpm:tcp:172.16.238.10:9000
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_BACKEND_REWRITE Value: file:backend.cfg
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_BACKEND_TIMEOUT Value: 180
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_SSL_TYPE Value: both
devilbox-httpd-1 | [INFO] Set $MASS_VHOST_TLD_SUFFIX Value: .loc
devilbox-httpd-1 | [INFO] Variables: Misc:
devilbox-httpd-1 | [INFO] Set $WORKER_CONNECTIONS Value: 1024
devilbox-httpd-1 | [INFO] Set $WORKER_PROCESSES Value: auto
devilbox-httpd-1 | [INFO] Set $HTTP2_ENABLE Value: 1
devilbox-httpd-1 | [INFO] Set $DOCKER_LOGS Value: 0
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Validate Settings
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-php-1 | [INFO] Debug level: 2
devilbox-php-1 | [INFO] Changing user 'devilbox' uid to: 501
devilbox-httpd-1 | [INFO] Settings: General:
devilbox-httpd-1 | [OK] Valid $NEW_UID User ID (uid) 501
devilbox-php-1 | root $ usermod -u 501 devilbox 2>/dev/null
devilbox-httpd-1 | [OK] Valid $NEW_GID Group ID (gid) 20
devilbox-php-1 | root $ chown -R devilbox /home/devilbox 2>/dev/null || true
devilbox-php-1 | root $ chown -R devilbox /var/lib/php/session
devilbox-php-1 | root $ chown -R devilbox /var/lib/php/wsdlcache
devilbox-php-1 | root $ chown -R devilbox /var/spool/mail/devilbox
devilbox-php-1 | root $ chown -R devilbox /etc/supervisor/custom.d
devilbox-php-1 | [WARN] Group with 20 already exists: dialout
devilbox-php-1 | [INFO] Changing GID of dialout to 9876
devilbox-php-1 | root $ groupmod -g 9876 dialout
devilbox-php-1 | [INFO] Changing group 'devilbox' gid to: 20
devilbox-php-1 | root $ groupmod -g 20 devilbox 2>/dev/null
devilbox-php-1 | root $ chown -R :devilbox /home/devilbox 2>/dev/null || true
devilbox-php-1 | root $ chown -R :devilbox /var/lib/php/session
devilbox-php-1 | root $ chown -R :devilbox /var/lib/php/wsdlcache
devilbox-php-1 | root $ chown -R :devilbox /var/spool/mail/devilbox
devilbox-php-1 | root $ chown -R :devilbox /etc/supervisor/custom.d
devilbox-php-1 | [INFO] Setting container timezone to: UTC
devilbox-php-1 | root $ ln -sf /usr/share/zoneinfo/UTC /etc/localtime
devilbox-php-1 | [INFO] Setting PHP: timezone=UTC
devilbox-php-1 | root $ echo 'date.timezone = UTC' > /usr/local/etc/php/conf.d/devilbox-runtime-timezone.ini
devilbox-php-1 | [INFO] Docker date set to: Sun Oct 20 20:03:54 UTC 2024
devilbox-php-1 | [INFO] $DOCKER_LOGS set to 0. Logging to files under: /var/log/php
devilbox-php-1 | [INFO] Make sure to mount this directory in order to view logs
devilbox-php-1 | root $ chown -R devilbox:devilbox /var/log/php
devilbox-php-1 | root $ chmod 0755 /var/log/php
devilbox-php-1 | [INFO] $ENABLE_MAIL set to 2. Enabling postfix catch-all
devilbox-php-1 | root $ chown devilbox:devilbox /var/log/php
devilbox-php-1 | root $ chown devilbox:devilbox /var/log/php/mail.log
devilbox-php-1 | root $ chmod 0644 /var/log/php/mail.log
devilbox-php-1 | root $ chmod 0644 /var/mail/devilbox
devilbox-php-1 | root $ chown devilbox:devilbox /var/mail
devilbox-php-1 | root $ chown devilbox:devilbox /var/mail/devilbox
devilbox-php-1 | root $ postconf -e 'strict_mailbox_ownership=no'
devilbox-php-1 | root $ postconf -e 'inet_protocols=ipv4'
devilbox-php-1 | root $ postconf -e 'myhostname=localhost'
devilbox-php-1 | root $ postconf -e 'virtual_alias_maps=pcre:/etc/postfix/virtual'
devilbox-php-1 | root $ echo '/.*@.*/ devilbox' >> /etc/postfix/virtual
devilbox-php-1 | root $ newaliases
devilbox-php-1 | [INFO] Forwarding httpd:80 to 127.0.0.1:80 inside this docker.
devilbox-php-1 | [INFO] Forwarding httpd:443 to 127.0.0.1:443 inside this docker.
devilbox-bind-1 | [INFO] Debug level: 2
devilbox-bind-1 |
devilbox-bind-1 |
devilbox-php-1 | [INFO] Forwarding mysql:3306 to 127.0.0.1:3306 inside this docker.
devilbox-php-1 | [INFO] Forwarding pgsql:5432 to 127.0.0.1:5432 inside this docker.
devilbox-php-1 | [INFO] Forwarding redis:6379 to 127.0.0.1:6379 inside this docker.
devilbox-php-1 | [INFO] Forwarding memcd:11211 to 127.0.0.1:11211 inside this docker.
devilbox-php-1 | [INFO] Forwarding mongo:27017 to 127.0.0.1:27017 inside this docker.
devilbox-php-1 | [INFO] Enabling 'socat-80-httpd-80' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'socat-443-httpd-443' to be started by supervisord
devilbox-httpd-1 | [OK] Valid $TIMEZONE ignored (not specified)
devilbox-httpd-1 | [INFO] Settings: Main Vhost:
devilbox-php-1 | [INFO] Enabling 'socat-3306-mysql-3306' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'socat-5432-pgsql-5432' to be started by supervisord
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_ENABLE Default vhost Enabled
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_DOCROOT_DIR Document root: /var/www/default/htdocs
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_TEMPLATE_DIR Template dir /var/www/default/cfg
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_ALIASES_ALLOW Defined Aliases /devilbox-api/, /vhost.d/
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_ALIASES_DENY Defined Aliases /\.git, /\.ht.*
devilbox-php-1 | [INFO] Enabling 'socat-6379-redis-6379' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'socat-11211-memcd-11211' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'socat-27017-mongo-27017' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'rsyslogd' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'postfix' to be started by supervisord
devilbox-php-1 | [INFO] Enabling 'php-fpm' to be started by supervisord
devilbox-php-1 | root $ find /usr/local/etc/php/conf.d -type f -iname '*.ini' -exec chmod 0644 "{}" \;
devilbox-php-1 | root $ find /usr/local/etc/php-fpm.d -type f -iname '*.conf' -exec chmod 0644 "{}" \;
devilbox-php-1 | [INFO] $ENABLE_MODULES set, but empty. Not enabling any PHP modules.
devilbox-php-1 | [INFO] Disabling the following PHP modules: oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole
devilbox-php-1 | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-oci8.ini
devilbox-php-1 | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-pdo_sqlsrv.ini
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_BACKEND PHP via PHP-FPM Remote: tcp://172.16.238.10:9000
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_BACKEND_TIMEOUT Timeout: 180sec
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_SSL_TYPE Vhost protocol HTTP and HTTPS
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_SSL_CN SSL cert subject CN = localhost,*.localhost,devilbox,*.devilbox,httpd
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_STATUS_ENABLE Status page Enabled
devilbox-httpd-1 | [OK] Valid $MAIN_VHOST_STATUS_ALIAS Status page URL /devilbox-httpd-status
devilbox-httpd-1 | [INFO] Settings: Mass Vhost:
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_ENABLE Mass vhost Enabled
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_DOCROOT_DIR Document root: /shared/httpd/<project>/htdocs
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_TEMPLATE_DIR Template dir /shared/httpd/<project>/.devilbox
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_ALIASES_ALLOW Defined Aliases /devilbox-api/
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_ALIASES_DENY Defined Aliases /\.git, /\.ht.*
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_BACKEND PHP via PHP-FPM Remote: tcp://172.16.238.10:9000
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_BACKEND_REWRITE Backend overwrite /shared/httpd/<project>/.devilbox/backend.cfg
devilbox-php-1 | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-sqlsrv.ini
devilbox-php-1 | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-rdkafka.ini
devilbox-php-1 | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-swoole.ini
devilbox-php-1 | root $ chown devilbox:devilbox /etc/mysqldump-secure.conf
devilbox-php-1 | root $ chown devilbox:devilbox /etc/mysqldump-secure.cnf
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_BACKEND_TIMEOUT Timeout: 180sec
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_SSL_TYPE Vhost protocol HTTP and HTTPS
devilbox-httpd-1 | [OK] Valid $MASS_VHOST_TLD_SUFFIX Vhost domain <project>.loc
devilbox-httpd-1 | [INFO] Settings: Misc:
devilbox-php-1 | root $ chown devilbox:devilbox /var/log/mysqldump-secure.log
devilbox-php-1 | root $ chown devilbox:devilbox /shared/backups/mysql
devilbox-php-1 | [INFO] $MYSQL_BACKUP_USER set for mysqldump-secure. Changing to 'root'
devilbox-php-1 | root $ sed -i'' 's/^user.*/user = root/g' /etc/mysqldump-secure.cnf
devilbox-php-1 | [INFO] $MYSQL_BACKUP_PASS set for mysqldump-secure. Changing to '******'
devilbox-httpd-1 | [OK] Valid $WORKER_CONNECTIONS worker_connections 1024
devilbox-httpd-1 | [OK] Valid $WORKER_PROCESSES worker_processes auto
devilbox-httpd-1 | [OK] Valid $HTTP2_ENABLE HTTP/2 Enabled
devilbox-httpd-1 | [OK] Valid $DOCKER_LOGS Log to stdout and stderr
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Apply Settings
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Setting uid to 501 (user: nginx)
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | /etc/bind/named.conf
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | include "/etc/bind/named.conf.logging";
devilbox-bind-1 | include "/etc/bind/named.conf.options";
devilbox-httpd-1 | uid=501(nginx) gid=101(nginx) groups=101(nginx),101(nginx)
devilbox-httpd-1 | [INFO] Group with 20 already exists: dialout
devilbox-httpd-1 | [INFO] Changing GID of dialout to 9876
devilbox-httpd-1 | [INFO] Setting gid to 20 (group: nginx)
devilbox-httpd-1 | uid=501(nginx) gid=20(nginx) groups=20(nginx),20(nginx)
devilbox-httpd-1 | [INFO] Skipping timezone. Already set to UTC: Sun Oct 20 20:03:54 UTC 2024
devilbox-php-1 | root $ perl -pi -e 's/^password.*/password = /g' /etc/mysqldump-secure.cnf
devilbox-php-1 | [INFO] $MYSQL_BACKUP_HOST set for mysqldump-secure. Changing to 'mysql'
devilbox-php-1 | root $ sed -i'' 's/^host.*/host = mysql/g' /etc/mysqldump-secure.cnf
devilbox-php-1 | root $ chown devilbox:devilbox /shared/backups
devilbox-php-1 | root $ chown devilbox:devilbox /shared/httpd
devilbox-httpd-1 | [INFO] vhost-gen: no custom global template found in: /etc/vhost-gen.d/nginx.yml
devilbox-httpd-1 | vhost-gen: [INFO] Loading configuration file (-c): /etc/vhost-gen/main.yml
devilbox-httpd-1 | vhost-gen: [INFO] Loading vhost template (global) (-t): /etc/vhost-gen/templates-main/nginx.yml
devilbox-httpd-1 | vhost-gen: [INFO] Loading vhost template (override) (-o): /var/www/default/cfg/nginx.yml
devilbox-httpd-1 | vhost-gen: [INFO] Override Vhost template not found: /var/www/default/cfg/nginx.yml
devilbox-httpd-1 | vhost-gen: [INFO] Creating vhost type: https and http (both)
devilbox-php-1 | root $ chmod 0755 /shared/backups
devilbox-httpd-1 | vhost-gen: [INFO] Using vhost name: localhost
devilbox-httpd-1 | vhost-gen: [INFO] Log setting: dir -> True
devilbox-httpd-1 | vhost-gen: [INFO] Log setting: Not specified
devilbox-httpd-1 | vhost-gen: [INFO] Vhost config written to: /etc/httpd/conf.d/localhost.conf
devilbox-httpd-1 | [INFO] Existing Certificate Authority files found in: /ca
devilbox-httpd-1 | cert-gen: [INFO] Create CSR file: /etc/httpd/cert/main/localhost.csr
devilbox-httpd-1 | cert-gen: [INFO] Create CRT file: /etc/httpd/cert/main/localhost.crt
devilbox-httpd-1 | cert-gen: [INFO] Verify CRT file: /etc/httpd/cert/main/localhost.crt
devilbox-httpd-1 | cert-gen: [INFO] Verify CRT against CA file: /ca/devilbox-ca.crt
devilbox-httpd-1 | [INFO] Fixing ownership (recursively) in: /ca
devilbox-bind-1 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1 | [INFO] BIND logging: disabled explicitly
devilbox-bind-1 | [INFO] Using default DNS TTL time: 3600 sec
devilbox-bind-1 | [INFO] Using default DNS Refresh time: 1200 sec
devilbox-bind-1 | [INFO] Using default DNS Retry time: 180 sec
devilbox-bind-1 | [INFO] Using default DNS Expiry time: 1209600 sec
devilbox-httpd-1 | [INFO] Setting Nginx worker_processes to: auto
devilbox-httpd-1 | [INFO] Setting Nginx worker_connections to: 1024
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [INFO] Main Entrypoint
devilbox-httpd-1 | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1 | [DONE] Starting supervisord: 4.2.4 [HTTPD: nginx/1.22.1]
devilbox-bind-1 | [INFO] Using default DNS Max Cache time: 10800 sec
devilbox-bind-1 | [INFO] Changing DNS Max Cache size to: 90%
devilbox-bind-1 | [INFO] Not adding any PTR records
devilbox-bind-1 | [INFO] Adding A Record: *.loc -> 127.0.0.1
devilbox-bind-1 | zone rpz/IN: loaded serial 1729454633
devilbox-bind-1 | OK
devilbox-bind-1 | [INFO] Not adding any CNAME records
devilbox-bind-1 | [INFO] $ALLOW_QUERY not set.
devilbox-bind-1 | [INFO] DNS query rules will not be set
devilbox-php-1 | root $ chmod 0755 /shared/httpd
devilbox-php-1 | root $ cp /ca/devilbox-ca.crt /usr/local/share/ca-certificates/devilbox-devilbox-ca.crt
devilbox-php-1 | root $ update-ca-certificates
devilbox-bind-1 | [INFO] $ALLOW_RECURSION not set.
devilbox-bind-1 | [INFO] DNS recursion rules will not be set
devilbox-bind-1 | [INFO] DNSSEC Validation: no
devilbox-bind-1 | [INFO] Adding custom DNS forwarder: 8.8.8.8,8.8.4.4
devilbox-bind-1 |
devilbox-php-1 | Updating certificates in /etc/ssl/certs...
devilbox-php-1 | 1 added, 0 removed; done.
devilbox-php-1 | Running hooks in /etc/ca-certificates/update.d...
devilbox-php-1 | done.
devilbox-php-1 | [INFO] Starting supervisord
devilbox-php-1 | 2024-10-20 20:03:57,990 WARN No file matches via include "/etc/supervisor/custom.d/*.conf"
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/php-fpm.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/postfix.conf" during parsing
devilbox-bind-1 |
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/rsyslogd.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-11211-memcd-11211.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-27017-mongo-27017.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-3306-mysql-3306.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-443-httpd-443.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-5432-pgsql-5432.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-6379-redis-6379.conf" during parsing
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Included extra file "/etc/supervisor/conf.d/socat-80-httpd-80.conf" during parsing
devilbox-bind-1 | /etc/bind/named.conf.options
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | options {
devilbox-bind-1 | directory "/var/cache/bind";
devilbox-bind-1 | dnssec-validation no;
devilbox-bind-1 | auth-nxdomain no; # conform to RFC1035
devilbox-bind-1 | listen-on-v6 { any; };
devilbox-bind-1 | max-cache-size 90%;
devilbox-bind-1 | response-policy { zone "rpz"; };
devilbox-bind-1 | forwarders {
devilbox-bind-1 | 8.8.8.8;
devilbox-bind-1 | 8.8.4.4;
devilbox-bind-1 | };
devilbox-bind-1 | };
devilbox-bind-1 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1 |
devilbox-bind-1 |
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | /etc/bind/custom/conf/rpz.conf
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | zone "rpz" IN {
devilbox-bind-1 | type master;
devilbox-php-1 | 2024-10-20 20:03:57,990 INFO Set uid to user 0 succeeded
devilbox-php-1 | 2024-10-20 20:03:57,991 INFO supervisord started with pid 1
devilbox-php-1 | 2024-10-20 20:03:58,999 INFO spawned: 'rsyslogd' with pid 1502
devilbox-php-1 | 2024-10-20 20:03:59,006 INFO spawned: 'php-fpm' with pid 1503
devilbox-php-1 | 2024-10-20 20:03:59,014 INFO spawned: 'postfix' with pid 1504
devilbox-php-1 | 2024-10-20 20:03:59,018 INFO spawned: 'socat-11211-memcd-11211' with pid 1505
devilbox-bind-1 | allow-transfer { any; };
devilbox-php-1 | 2024-10-20 20:03:59,023 INFO spawned: 'socat-27017-mongo-27017' with pid 1506
devilbox-bind-1 | allow-update { any; };
devilbox-bind-1 | file "/etc/bind/custom/zone/rpz";
devilbox-bind-1 | };
devilbox-bind-1 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1 |
devilbox-bind-1 |
devilbox-php-1 | 2024-10-20 20:03:59,027 INFO spawned: 'socat-3306-mysql-3306' with pid 1509
devilbox-php-1 | 2024-10-20 20:03:59,031 INFO spawned: 'socat-443-httpd-443' with pid 1511
devilbox-php-1 | 2024-10-20 20:03:59,034 INFO spawned: 'socat-5432-pgsql-5432' with pid 1512
devilbox-php-1 | 2024-10-20 20:03:59,037 INFO spawned: 'socat-6379-redis-6379' with pid 1513
devilbox-php-1 | 2024-10-20 20:03:59,043 INFO spawned: 'socat-80-httpd-80' with pid 1514
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | /etc/bind/custom/zone/rpz
devilbox-bind-1 | --------------------------------------------------------------------------------
devilbox-bind-1 | $TTL 3600
devilbox-bind-1 | @ IN SOA bind. admin.bind. (
devilbox-bind-1 | 1729454633 ; Serial number
devilbox-bind-1 | 1200 ; Refresh time
devilbox-bind-1 | 180 ; Retry time
devilbox-bind-1 | 1209600 ; Expiry time
devilbox-bind-1 | 10800 ; Negative Cache TTL
devilbox-bind-1 | )
devilbox-bind-1 |
devilbox-php-1 | 2024-10-20 20:04:00,106 INFO success: rsyslogd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: php-fpm entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: postfix entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-11211-memcd-11211 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-27017-mongo-27017 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-3306-mysql-3306 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-443-httpd-443 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-5432-pgsql-5432 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,107 INFO success: socat-6379-redis-6379 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1 | 2024-10-20 20:04:00,108 INFO success: socat-80-httpd-80 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-bind-1 |
devilbox-bind-1 | ; NS Records
devilbox-bind-1 | IN NS bind.
devilbox-bind-1 |
devilbox-bind-1 |
devilbox-bind-1 | ; Custom Records
devilbox-bind-1 | *.loc IN A 127.0.0.1
devilbox-bind-1 | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1 | [INFO] Starting BIND 9.18.16(Optional) Additional information
I noticed that this is not a widespread problem in open issues. But an hour ago everything worked, but after rebooting the mac it no longer works