Can't install on eMMC ( S905X )

[RainBowSheepx]

The installation is successful, but everything returns after a reboot.
Probably, some partitions are read only

Current Host disk:  [ /dev/sda ]
Target eMMC disk: [ /dev/mmcblk1 ]
Select partition table type [ MSDOS ]
This script will erase all existing partitions and its data on the disk!!
Are you sure y/N ? y
Ok, proceeding...

Start create partition table on eMMC [ /dev/mmcblk1 ]...
Backup vendor u-boot
Partition [super] not found
Partition [userdata] not found
Partition [vendor] not found
Found: 13
offset: 3082813440
size: 12551454720
dev             nr      name    offset          size    end             flags
Start restoring vendor u-boot
Waiting for sync... [ ok ]
Model: MMC AWMB3R (sd/mmc)
Disk /dev/mmcblk1: 15.6GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type     File system  Flags
 1      3083MB  3620MB  537MB   primary  fat32        lba
 2      3620MB  15.6GB  12.0GB  primary

Start create filesystems on eMMC [ /dev/mmcblk1 ]...
mkfs.fat 4.2 (2021-01-31)
mke2fs 1.47.2 (1-Jan-2025)
Discarding device blocks: done
Creating filesystem with 2933248 4k blocks and 734400 inodes
Filesystem UUID: 3067533e-3db4-40de-9e3f-f6602dc380da
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

[ done ]
Mounting filesystems... [ done ]
Copy /boot to boot partition... [ done ]
Creating rootfs... [ done ]
Copying rootfs files...
Copying [ /sbin ]
              0   0%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
Copying [ /boot ]
     50,130,521 100%   77.31MB/s    0:00:00 (xfr#442, to-chk=0/449)
Copying [ /opt ]
              0 100%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
Copying [ /usr ]
    448,375,477  99%    3.79MB/s    0:01:52 (xfr#11193, to-chk=0/13491)
Copying [ /lib ]
              0   0%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
Copying [ /srv ]
              0 100%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
Copying [ /root ]
      4,228,387 100%   91.63MB/s    0:00:00 (xfr#11, to-chk=0/16)
Copying [ /bin ]
              0   0%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
Copying [ /etc ]
      1,271,329  98%    1.67MB/s    0:00:00 (xfr#249, to-chk=0/884)
Copying [ /var ]
    253,185,028  99%    9.05MB/s    0:00:26 (xfr#1371, to-chk=0/1450)
Copying [ /home ]
              0 100%    0.00kB/s    0:00:00 (xfr#0, to-chk=0/1)
[ done ]
Updating target fstab... [ done ]
Updating boot.config... [ done ]
Wait for sync... [ done ]
Cleaning up...  [done]

Ready, you can now reboot. Or not, whatever you want.
tvbox:~#lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
sda            8:0    1  7.4G  0 disk
├─sda1         8:1    1  256M  0 part /boot
└─sda2         8:2    1  7.1G  0 part /
sdb            8:16   1    0B  0 disk
mmcblk1      179:0    0 14.6G  0 disk
├─mmcblk1p1  179:1    0  512M  0 part
└─mmcblk1p2  179:2    0 11.2G  0 part
mmcblk1boot0 179:32   0    4M  1 disk
mmcblk1boot1 179:64   0    4M  1 disk

After reboot:

tvbox:~#lsblk
NAME         MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
sda            8:0    1  7.4G  0 disk
├─sda1         8:1    1  256M  0 part /boot
└─sda2         8:2    1  7.1G  0 part /
sdb            8:16   1    0B  0 disk
mmcblk1      179:0    0 14.6G  0 disk
├─mmcblk1p1  179:1    0    4M  0 part
├─mmcblk1p2  179:2    0   64M  0 part
├─mmcblk1p3  179:3    0  512M  0 part
├─mmcblk1p4  179:4    0    1K  0 part
├─mmcblk1p5  179:5    0    8M  0 part
├─mmcblk1p6  179:6    0   32M  0 part
├─mmcblk1p7  179:7    0   32M  0 part
├─mmcblk1p8  179:8    0    8M  0 part
├─mmcblk1p9  179:9    0    8M  0 part
├─mmcblk1p10 179:10   0   32M  0 part
├─mmcblk1p11 179:11   0   32M  0 part
├─mmcblk1p12 179:12   0  512M  0 part
├─mmcblk1p13 179:13   0   32M  0 part
├─mmcblk1p14 179:14   0  1.5G  0 part
└─mmcblk1p15 179:15   0 11.7G  0 part
mmcblk1boot0 179:32   0    4M  1 disk
mmcblk1boot1 179:64   0    4M  1 disk

My fw_printenv

tvbox:~#fw_printenv
1080p_h=1000
1080p_w=1778
1080p_x=71
1080p_y=40
EnableSelinux=permissive
baudrate=115200
boot_emmc_parts=d d 1 2 1c 1b
boot_script_order=bootscript cfgload s905_autoscript boot.scr
bootcmd=run cmd_boot_get_order; for var in "${boot_order}"; do run cmd_boot_${var}; done; run cmd_boot_org
bootdelay=1
cmd_boot_emmc=setenv devtype mmc; setenv devnum 1; for partnum in "${boot_emmc_parts}"; do setenv distro_bootpart ${partnum}; run cmd_bootsript_load; done
cmd_boot_get_order=boot_order="${default_boot_order}"; if test "${onetime_boot_order}" != "" ; then boot_order=${onetime_boot_order}; setenv onetime_boot_order; saveenv; fi; if test "${bootfromnand}" = "1"; then setenv bootfromnand 0; saveenv; boot_order="org ${boot_order}"; fi; echo "resulting boot_order:${boot_order}";
cmd_boot_org=run storeboot
cmd_boot_sd=if mmcinfo; then setenv devtype mmc; setenv devnum 0; setenv distro_bootpart 1; run cmd_bootsript_load; fi
cmd_boot_usb=if usb storage; then ; else usb start; fi; setenv devtype usb; setenv distro_bootpart 1; for devnum in "0 1 2 3"; do setenv devnum ${devnum}; run cmd_bootsript_load; done
cmd_bootsript_load=for scrpt in "${boot_script_order}"; do fatload ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} ${scrpt} && run cmd_make_compat && autoscr ${loadaddr}; done;
cmd_make_compat=cmd_read="fatload ${devtype} ${devnum}:${distro_bootpart}"; device=${devtype};devnr=${devnum};partnr=${distro_bootpart};partnum=${distro_bootpart};autoscript_source=${devtype}
cmdline_keys=if keyman init 0x1234; then if keyman read usid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.serialno=${usid};fi;if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac} androidboot.mac=${mac};fi;if keyman read deviceid ${loadaddr} str; then setenv bootargs ${bootargs} androidboot.deviceid=${deviceid};fi;fi;
cvbs_drv=0
cvbsmode=576cvbs
default_boot_order=sd usb emmc org
display_bpp=16
display_color_bg=0
display_color_fg=0xffff
display_color_index=16
display_height=1080
display_layer=osd1
display_width=1920
dtb_mem_addr=0x1000000
ethaddr=00:15:18:01:81:31
factory_reset_poweroff_protect=echo wipe_data=${wipe_data}; echo wipe_cache=${wipe_cache};if test ${wipe_data} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi; if test ${wipe_cache} = failed; then run init_display; run storeargs;if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;fi;
fb_addr=0x3d800000
fb_height=1080
fb_width=1920
fdt_high=0x20000000
firstboot=0
gatewayip=10.18.9.1
hdmimode=2160p60hz420
hdmitx_rgb=0
hostname=arm_gxbb
init_display=osd open;osd clear;imgread pic logo bootup $loadaddr;bmp display $bootup_offset;bmp scale
initargs=rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000
ipaddr=10.18.9.97
jtag=apao
loadaddr=1080000
netmask=255.255.255.0
outputmode=2160p60hz420
preboot=run factory_reset_poweroff_protect;run upgrade_check;run init_display;run storeargs;run upgrade_key;run upgrade_adc_key;run switch_bootmode;
recovery_from_flash=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if imgread kernel ${recovery_part} ${loadaddr} ${recovery_offset}; then wipeisb; bootm ${loadaddr}; fi
recovery_from_sdcard=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload mmc 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload mmc 0 ${loadaddr} recovery.img; then if fatload mmc 0 ${dtb_mem_addr} dtb.img; then echo sd dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
recovery_from_udisk=setenv bootargs ${bootargs} aml_dt=${aml_dt} recovery_part={recovery_part} recovery_offset={recovery_offset};if fatload usb 0 ${loadaddr} aml_autoscript; then autoscr ${loadaddr}; fi;if fatload usb 0 ${loadaddr} recovery.img; then if fatload usb 0 ${dtb_mem_addr} dtb.img; then echo udisk dtb.img loaded; fi;wipeisb; bootm ${loadaddr};fi;
recovery_offset=0
recovery_part=recovery
sdc_burning=sdc_burn ${sdcburncfg}
sdcburncfg=aml_sdc_burn.ini
serverip=10.18.9.113
storeargs=setenv bootargs ${initargs} androidboot.selinux=${EnableSelinux} logo=${display_layer},loaded,${fb_addr},${outputmode} maxcpus=${maxcpus} vout=${outputmode},enable hdmimode=${hdmimode} cvbsmode=${cvbsmode} hdmitx=${cecconfig},rgb${hdmitx_rgb}  cvbsdrv=${cvbs_drv} androidboot.firstboot=${firstboot} jtag=${jtag}; setenv bootargs ${bootargs} androidboot.hardware=amlogic;run cmdline_keys;
storeboot=if imgread kernel boot ${loadaddr}; then bootm ${loadaddr}; fi;run update;
switch_bootmode=get_rebootmode;if test ${reboot_mode} = factory_reset; then run recovery_from_flash;else if test ${reboot_mode} = update; then run update;else if test ${reboot_mode} = cold_boot; then run try_auto_burn; fi;fi;fi;
try_auto_burn=update 700 750;
update=run usb_burning; run sdc_burning; if mmcinfo; then run recovery_from_sdcard;fi;if usb start 0; then run recovery_from_udisk;fi;run recovery_from_flash;
upgrade_adc_key=saradc open 0; if saradc get_in_range 0 0x50; then msleep 50; if saradc get_in_range 0 0x50; then echo update by key...; run update; fi;fi;
upgrade_check=echo upgrade_step=${upgrade_step}; if itest ${upgrade_step} == 3; then run init_display; run storeargs; run update;else fi;
upgrade_key=if gpio input GPIOAO_2; then echo detect upgrade key; sleep 3;if gpio input GPIOAO_2; then run update; fi;fi;
upgrade_step=2
usb_burning=update 1000
wipe_cache=successful
wipe_data=successful

[devmfc]

Are you leaving the USB in the box while trying to boot from emmc? That is never gone work.
So three options:

1. Remove USB before booting.
2. Do not try to add partitions with blkdevparts cmdline (boot or box config?)
3. This is not stock Android? Slimbox or something? These images need stock Android image to boot.

[RainBowSheepx]

Thanks for the quick reply

1. If I remove USB, a clean Android starts booting
2. I didn't do it. I only used aml-multiboot-setup and aml-install-to-emmc scripts.
3. Idk, but I didn't flash new Android or recovery or something.
   This is what my Android looks like:
   
   

Also aml-part.sh

Found valid Amlogic Partition Table with 14 partitions
======================================================================
0 MiB --- offset: 0x0 B --- 0 B --- 0 s ---
        name:   bootloader
        flags:  0
        size:   4 MiB   0x400000 B
        end:    4 MiB   0x400000 B
  ---------------------
  ####  GAP 32 MiB  ####
36 MiB --- offset: 0x2400000 B --- 37748736 B --- 73728 s ---
        name:   reserved
        flags:  0
        size:   64 MiB  0x4000000 B
        end:    100 MiB         0x6400000 B
  ---------------------
  ####  GAP 8 MiB  ####
108 MiB --- offset: 0x6c00000 B --- 113246208 B --- 221184 s ---
        name:   cache
        flags:  2
        size:   512 MiB         0x20000000 B
        end:    620 MiB         0x26c00000 B
  ---------------------
  ####  GAP 8 MiB  ####
628 MiB --- offset: 0x27400000 B --- 658505728 B --- 1286144 s ---
        name:   env
        flags:  0
        size:   8 MiB   0x800000 B
        end:    636 MiB         0x27c00000 B
  ---------------------
  ####  GAP 8 MiB  ####
644 MiB --- offset: 0x28400000 B --- 675282944 B --- 1318912 s ---
        name:   logo
        flags:  1
        size:   32 MiB  0x2000000 B
        end:    676 MiB         0x2a400000 B
  ---------------------
  ####  GAP 8 MiB  ####
684 MiB --- offset: 0x2ac00000 B --- 717225984 B --- 1400832 s ---
        name:   recovery
        flags:  1
        size:   32 MiB  0x2000000 B
        end:    716 MiB         0x2cc00000 B
  ---------------------
  ####  GAP 8 MiB  ####
724 MiB --- offset: 0x2d400000 B --- 759169024 B --- 1482752 s ---
        name:   rsv
        flags:  1
        size:   8 MiB   0x800000 B
        end:    732 MiB         0x2dc00000 B
  ---------------------
  ####  GAP 8 MiB  ####
740 MiB --- offset: 0x2e400000 B --- 775946240 B --- 1515520 s ---
        name:   tee
        flags:  1
        size:   8 MiB   0x800000 B
        end:    748 MiB         0x2ec00000 B
  ---------------------
  ####  GAP 8 MiB  ####
756 MiB --- offset: 0x2f400000 B --- 792723456 B --- 1548288 s ---
        name:   crypt
        flags:  1
        size:   32 MiB  0x2000000 B
        end:    788 MiB         0x31400000 B
  ---------------------
  ####  GAP 8 MiB  ####
796 MiB --- offset: 0x31c00000 B --- 834666496 B --- 1630208 s ---
        name:   misc
        flags:  1
        size:   32 MiB  0x2000000 B
        end:    828 MiB         0x33c00000 B
  ---------------------
  ####  GAP 8 MiB  ####
836 MiB --- offset: 0x34400000 B --- 876609536 B --- 1712128 s ---
        name:   instaboot
        flags:  1
        size:   512 MiB         0x20000000 B
        end:    1348 MiB        0x54400000 B
  ---------------------
  ####  GAP 8 MiB  ####
1356 MiB --- offset: 0x54c00000 B --- 1421869056 B --- 2777088 s ---
        name:   boot
        flags:  1
        size:   32 MiB  0x2000000 B
        end:    1388 MiB        0x56c00000 B
  ---------------------
  ####  GAP 8 MiB  ####
1396 MiB --- offset: 0x57400000 B --- 1463812096 B --- 2859008 s ---
        name:   system
        flags:  1
        size:   1536 MiB        0x60000000 B
        end:    2932 MiB        0xb7400000 B
  ---------------------
  ####  GAP 8 MiB  ####
2940 MiB --- offset: 0xb7c00000 B --- 3082813440 B --- 6021120 s ---
        name:   data
        flags:  4
        size:   11970 MiB       0x2ec200000 B
        end:    14910 MiB       0x3a3e00000 B
====================================================================