From f2c6312009751bb9da870a03dde4dbf549044e27 Mon Sep 17 00:00:00 2001 From: Farid Date: Sun, 25 Feb 2024 11:00:25 +0100 Subject: [PATCH] Update README.md Added an instruction about restarting an appliance that does not show up in the integration while showing up in the mobile app without wifi. I had this issue and was about to open an issue when I found other users that faced the same issue and fixed it by restarting the appliance, and that worked for me too. --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index a2cfa8d..58f4adc 100644 --- a/README.md +++ b/README.md @@ -232,8 +232,8 @@ In contrast, setting ```sensor_value_translation: server``` will override this b * **Some of my appliances are not showing up after I added the integration** This is most commonly caused by two reasons: 1. The appliance must be powered on and connected to the Home Connect service to be discovered. Once the missing devices are turned on and connected, they will automatically be discovered and added by the integration. - This can be verified in the Home Connect mobile app **but only while the wifi on the phone is turned OFF**. If the devices are active in the mobile app while the phone's wifi is turned off then please open an issue with a debug log to report it. - 2. Due to some unreasonable rate limits set by BSH, there is a limit of about 5 + This can be verified in the Home Connect mobile app **but only while the wifi on the phone is turned OFF**. If some devices still do not show app in the integration, restart them. If the devices are active in the mobile app while the phone's wifi is turned off then please open an issue with a debug log to report it. + 3. Due to some unreasonable rate limits set by BSH, there is a limit of about 5 appliances loaded per minute. If you have more, expect the initial load to take longer. The integration will wait for the service to become available and continue loading the rest of the appliances. You may have to refresh your screen to see them in Home Assistant after they were added. See more details in the next item. * **The Home Connect Status sensor is showing the value BLOCKED and nothing works**