Replay pcap using crc-based rate control

[goomadao]

I'd like to replay pcap files with crc-based rate control method to get better precision, using queue:sendWithDelay(bufs) instead of rateLimiter:sendN(bufs, n) in replay-pcap.lua. But there were two problems that I couldn't figure out.

1. When sending and receiving pcap packets with Intel I350 Gigabit NIC, whether the rx-all option is on or off, packets not in the pcap file can be received. While when sending with Intel X722 10GbE NIC and receiving with Intel 82599ES 10-Gigabit NIC, packets not in the pcap file can be received only if the rx-all option is on, which seems normal and resonable.
2. The output of MoonGen was weird as follows, the pps & bps became negative sometimes.

[INFO]  Initializing DPDK. This will take a few seconds...
EAL: Detected 48 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:1a:00.0 on NUMA socket 0
EAL:   probe driver: 8086:37d0 net_i40e
EAL: PCI device 0000:1a:00.1 on NUMA socket 0
EAL:   probe driver: 8086:37d0 net_i40e
EAL: PCI device 0000:1a:00.2 on NUMA socket 0
EAL:   probe driver: 8086:37d1 net_i40e
EAL: PCI device 0000:1a:00.3 on NUMA socket 0
EAL:   probe driver: 8086:37d1 net_i40e
EAL: PCI device 0000:3b:00.0 on NUMA socket 0
EAL:   probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:3b:00.1 on NUMA socket 0
EAL:   probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:3d:00.0 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
EAL: PCI device 0000:3d:00.1 on NUMA socket 0
EAL:   probe driver: 8086:1521 net_e1000_igb
[INFO]  Found 2 usable devices:
   Device 0: 48:DC:2D:10:41:F1 (Intel Corporation Ethernet Connection X722 for 10GbE SFP+)
   Device 1: B8:E3:B1:55:85:11 (Intel Corporation I350 Gigabit Network Connection)
[INFO]  Waiting for devices to come up...
[INFO]  Device 1 (B8:E3:B1:55:85:11) is up: 1000 MBit/s
[INFO]  1 device is up.
[Device: id=1] TX: 0.00 Mpps, 37 Mbit/s (38 Mbit/s with framing)
[Device: id=1] TX: 0.00 Mpps, 61 Mbit/s (62 Mbit/s with framing)
[Device: id=1] TX: -0.00 Mpps, -44 Mbit/s (-44 Mbit/s with framing)
[Device: id=1] TX: 0.00 Mpps, 61 Mbit/s (62 Mbit/s with framing)
[Device: id=1] TX: -0.00 Mpps, -43 Mbit/s (-44 Mbit/s with framing)
[Device: id=1] TX: 0.00 Mpps, 59 Mbit/s (60 Mbit/s with framing)
[Device: id=1] TX: -0.00 Mpps, -43 Mbit/s (-44 Mbit/s with framing)
[Device: id=1] TX: 0.00 Mpps, 59 Mbit/s (60 Mbit/s with framing)
[Device: id=1] TX: -0.00 Mpps, -43 Mbit/s (-43 Mbit/s with framing)

Do you have any idea of those? Thanks in advance for your fantastic software.