-
|
Hello experts, I have set the water heating to turn on from 16:30-22:00 to a maximum temperature of 45 degrees. The heating starts fine at 16:30, but the water cools down because it goes through the circulation pipe to get the hot water to the floor. Boiler: Buderus LOGAMAX PLUS GB 072 |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 1 reply
-
|
In normal dhw mode (dhw/comfort hot) this is the hysteresis on value (dhw/hyston), but some systems have also dhw mode eco with larger hysteresis, test different settings for mode and hysteresis. |
Beta Was this translation helpful? Give feedback.
-
|
It is not possible to set the minimum DWH temperature. It is only possible to set the boiler to ECO mode (i.e. minus 10 degrees from the maximum), or standard mode (i.e. 5 degrees from the maximum).
I changed from ECO to Standard
Miro |
Beta Was this translation helpful? Give feedback.
It is not possible to set the minimum DWH temperature. It is only possible to set the boiler to ECO mode (i.e. minus 10 degrees from the maximum), or standard mode (i.e. 5 degrees from the maximum).
I only found the manual not in ENG ...
I changed from ECO to Standard
Max temp 45degrees and now the heating turns on again when the temperature drops below 40 degrees.
Miro