[Micronova] Wrong connexion schematic #5446
Description
Feedback
Hello,
The schema to interface the micronova board and a microcontroller is wrong (components/images/micronova_optocouplers.png)
Pin 3 and 4 of the two down optocoupler are inverted, pin 4 should be tied to GND
We can found a correct schema here: https://github.com/eni23/micronova-controller/blob/master/doc/schematic-ifboard.png from this page https://github.com/eni23/micronova-controller
Thanks and regards,
Cyril
URL
https://esphome.io/components/micronova/
Additional information
No response