AZ3166

page_type	description	languages	products
sample	Connect an MXCHIP AZ3166 to Azure IoT using Azure RTOS	c	azure-iot azure-iot-pnp azure-rtos azure-iot-central

Connect an MXCHIP AZ3166 to Azure IoT

The Quickstart button above provides the complete steps for creating an IoT Central application and then configuring, building and flashing the device.

For guidance on connecting additional devices, see the Embedded device quickstarts.

What you need

• The MXCHIP AZ3166 IoT DevKit
• Wi-Fi 2.4 GHz
• USB 2.0 A male to Micro USB male cable

Steps

1. Recursively clone the repository:

   git clone --recursive https://github.com/azure-rtos/getting-started.git

2. Install the development tools:

   getting-started\tools\get-toolchain.bat

3. Add Wi-Fi and Azure IoT configuration to the config file:

   getting-started\MXChip\AZ3166\app\azure_config.h

4. Build the binary image:

   getting-started\MXChip\AZ3166\tools\rebuild.bat

5. Flash the image to the device by copying the image file to the AZ3166 drive:

   getting-started\MXChip\AZ3166\build\app\mxchip_azure_iot.bin

6. Configure a serial port app at baud rate 115,200 to monitor the device output.