libhyperscan-dev libhyperscan5

[romprod]

Hi,

I'm trying to build this but I'm getting the following issues.

TBH I'm not sure if I'm doing it correctly, I've copied the Dockerfile localy and tried building from that.

E: Unable to locate package libhyperscan-dev

E: Unable to locate package libhyperscan5

The command '/bin/sh -c NB_CORES=${BUILD_CORES-$(getconf _NPROCESSORS_CONF)} && BUILD_DEPS=" cmake gcc make ragel wget pkg-config liblua5.1-0-dev libluajit-5.1-dev libglib2.0-dev libevent-dev libsqlite3-dev libicu-dev libssl-dev libhyperscan-dev libjemalloc-dev libmagic-dev" && apt-get update && apt-get install -y -q --no-install-recommends ${BUILD_DEPS} libevent-2.1-6 libglib2.0-0 libssl1.1 libmagic1 liblua5.1-0 libluajit-5.1-2 libsqlite3-0 libhyperscan5 libjemalloc2 sqlite3 openssl ca-certificates gnupg dirmngr netcat && cd /tmp && SKALIBS_TARBALL="skalibs-${SKALIBS_VER}.tar.gz" && wget -q https://skarnet.org/software/skalibs/${SKALIBS_TARBALL} && CHECKSUM=$(sha256sum ${SKALIBS_TARBALL} | awk '{print $1}') && if [ "${CHECKSUM}" != "${SKALIBS_SHA256_HASH}" ]; then echo "${SKALIBS_TARBALL} : bad checksum" && exit 1; fi && tar xzf ${SKALIBS_TARBALL} && cd skalibs-${SKALIBS_VER} && ./configure --prefix=/usr --datadir=/etc && make && make install && cd /tmp && EXECLINE_TARBALL="execline-${EXECLINE_VER}.tar.gz" && wget -q https://skarnet.org/software/execline/${EXECLINE_TARBALL} && CHECKSUM=$(sha256sum ${EXECLINE_TARBALL} | awk '{print $1}') && if [ "${CHECKSUM}" != "${EXECLINE_SHA256_HASH}" ]; then echo "${EXECLINE_TARBALL} : bad checksum" && exit 1; fi && tar xzf ${EXECLINE_TARBALL} && cd execline-${EXECLINE_VER} && ./configure --prefix=/usr && make && make install && cd /tmp && S6_TARBALL="s6-${S6_VER}.tar.gz" && wget -q https://skarnet.org/software/s6/${S6_TARBALL} && CHECKSUM=$(sha256sum ${S6_TARBALL} | awk '{print $1}') && if [ "${CHECKSUM}" != "${S6_SHA256_HASH}" ]; then echo "${S6_TARBALL} : bad checksum" && exit 1; fi && tar xzf ${S6_TARBALL} && cd s6-${S6_VER} && ./configure --prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin && make && make install && cd /tmp && RSPAMD_TARBALL="${RSPAMD_VER}.tar.gz" && wget -q https://github.com/vstakhov/rspamd/archive/${RSPAMD_TARBALL} && CHECKSUM=$(sha256sum ${RSPAMD_TARBALL} | awk '{print $1}') && if [ "${CHECKSUM}" != "${RSPAMD_SHA256_HASH}" ]; then echo "${RSPAMD_TARBALL} : bad checksum" && exit 1; fi && tar xzf ${RSPAMD_TARBALL} && cd rspamd-${RSPAMD_VER} && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCONFDIR=/etc/rspamd -DRUNDIR=/run/rspamd -DDBDIR=/var/mail/rspamd -DLOGDIR=/var/log/rspamd -DPLUGINSDIR=/usr/share/rspamd -DLIBDIR=/usr/lib/rspamd -DNO_SHARED=ON -DWANT_SYSTEMD_UNITS=OFF -DENABLE_TORCH=ON -DENABLE_HIREDIS=ON -DINSTALL_WEBUI=ON -DENABLE_OPTIMIZATION=ON -DENABLE_HYPERSCAN=ON -DENABLE_JEMALLOC=ON -DJEMALLOC_ROOT_DIR=/jemalloc . && make -j${NB_CORES} && make install && cd /tmp && GUCCI_BINARY="gucci-v${GUCCI_VER}-linux-amd64" && wget -q https://github.com/noqcks/gucci/releases/download/${GUCCI_VER}/${GUCCI_BINARY} && CHECKSUM=$(sha256sum ${GUCCI_BINARY} | awk '{print $1}') && if [ "${CHECKSUM}" != "${GUCCI_SHA256_HASH}" ]; then echo "${GUCCI_BINARY} : bad checksum" && exit 1; fi && chmod +x ${GUCCI_BINARY} && mv ${GUCCI_BINARY} /usr/local/bin/gucci && apt-get purge -y ${BUILD_DEPS} && apt-get autoremove -y && apt-get clean && rm -rf /tmp/* /var/lib/apt/lists/* /var/cache/debconf/*-old' returned a non-zero code: 100`