Home Assistant OS 14.1

[sairon]

Home Assistant Operating System

• Bump Buildroot to 2024.02.9 (Bump Buildroot to 2024.02.9 #3745) @sairon
• Enable TCPMSS target iptables module for all boards (Enable TCPMSS target iptables module for all boards #3739) @sairon

Raspberry Pi

• RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 (RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 #3715) @sairon
• Compile hailo_pci module from original sources on RPi 5 (Compile hailo_pci module from original sources on RPi 5 #3732) @sairon
• Fix Hailo-8 firmware path expected since driver v4.19.0 (Fix Hailo-8 firmware path expected since driver v4.19.0 #3721) @sairon
• Bump RPi SDIO WiFi firmware to latest version (Bump RPi SDIO WiFi firmware to latest version #3719) @sairon
• Bump Hailo-8 firmware to 4.19.0 for RPi kernel 6.6.62 (Bump Hailo-8 firmware to 4.19.0 for RPi kernel 6.6.62 #3716) @sairon

Home Assistant Yellow

• RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 (RaspberryPi: Update kernel to 6.6.62 - dd2394360860d15146c96635796a75b05bb32b61 #3715) @sairon
• Remove existing rauc.db from a data disk on the first boot (Remove existing rauc.db from a data disk on the first boot #3737) @sairon
• Add Hailo PCIe driver and firmware for Yellow (Add Hailo PCIe driver and firmware for Yellow #3734) @sairon
• Bump RPi SDIO WiFi firmware to latest version (Bump RPi SDIO WiFi firmware to latest version #3719) @sairon

Home Assistant Green

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Generic x86-64

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

ASUS Tinker

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon

Generic aarch64

• Linux: Update kernel to 6.6.66 (Linux: Update kernel to 6.6.66 #3744) @sairon
• Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA (Add Hailo PCIe driver and firmware for x86-64, aarch64 and OVA #3736) @sairon

Build System

• Add HA Yellow image to RPi Imager index update action (Add HA Yellow image to RPi Imager index update action #3731) @sairon
• Bump docker/setup-buildx-action from 3.7.1 to 3.8.0 (Bump docker/setup-buildx-action from 3.7.1 to 3.8.0 #3746) @dependabot

---

This discussion was created from the release Home Assistant OS 14.1.

[Anto79-ops]

There are no issues on my NUC 12 (x86-64, bare-metal) with USB SkyConnect and USB Aeotec Z-Stick 7.

The system is running normally.

[saschachina]

No issues on my ESPRIMO Q920 (Generic x86-64) with USB Sonoff Dongle P (CC2652)

[Glodarilie]

if i make update i cant connect anymore to my HA, i have a raspberry pi5, if i unplug and plug back, it come back but update is not done

[kaovilai]

Same issue I think. So this means I need an independent from HA, Wi-Fi internet connected plug to force restart Pi5 to avoid HA outage like this.

[kaovilai]

After clicking update from Web UI (from another country conected via Tailscale Funnel), the RPi5 restarted and I am unable to reconnect to the device via the Funnel or other means.

Remotely checking the AT&T Nokia Router/Gateway(BGW320-505) via Smart Home Manager app reveals the device is no longer ethernet connected. Will get back to the device in few weeks to investigate, but for now my house is only smart for internet connected devices.