-
-
Notifications
You must be signed in to change notification settings - Fork 1k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Failed update 14.0->14.1 on Rpi5 #3763
Comments
Hi |
(Honestly I thought that the EEPROM thing was for NVME, and since I have an SD card didn't apply. I guess I was wrong 😁) Quick question before I fetch a SD card to try this firmware thing, @marlonqpa before all the upgrading, you were on 14.0 or 13.x? Because for both #3740 and #3720 they talk about 14.0, which is working fine in my setup. |
I tried to upgrade from 14.0 to 14.1 few times last week. With no success. |
I had the same I just reboot HA and then I tried again to update and success |
Same. I mentioned this here previously. |
From @Auka84:
Actually, same. I rebooted from Developer Tools > Restart > Advanced options > Reboot system. From @Xelnah:
Yep so I didn't try to update the EEPROM... The thing we have in common is the rebooting 🤔 From @kaovilai:
This is something I actually checked when it crashed, and everything looked fine. I have a Fritz!Box (not sure if I was looking to a cache entry or something). Given that I (and everyone else if I read correctly) managed to update to 14.1, I'm closing this |
Describe the issue you are experiencing
I have HAOS installed on a Rpi5 on the SD card.
I tried to update HAOS from the HA interface, and I wasn't able to connect to it after around 10 minutes. Tried to turn it off manually by a single click on the power button, and after 5 minutes I kept the power button pressed until it became red, then clicked once again. It booted successfully in the 14.0 slot. Here's approximately the same thing as
ha os info
would say it:What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
14.1
Did the problem occur after upgrading the Operating System?
No
Hardware details
Standard Rpi5 installation on SD Card. I have a Sonoff dongle for Zigbee.
Steps to reproduce the issue
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
System Information
Home Assistant Community Store
Home Assistant Cloud
Home Assistant Supervisor
Dashboards
Recorder
Additional information
Just to be sure: if I try again, I can always hard reboot and come back to 14.0, correct?
I'm not very familiar with the inner workings of HAOS (and frankly, that's because it always worked like a charm 🚀)
The text was updated successfully, but these errors were encountered: