v2.2.14

v2.2.14 Release Notes - October 31, 2023

Fixes

Verify transactions in a block are well formed

Verify that transactions in blocks appear exactly as their marshaled form after unmarshaling.
#4504

Dependencies

Fabric v2.2.14 has been tested with the following dependencies:

• Go 1.21.3
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Alpine 3.18.

Deprecations (existing)

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments, however for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications, in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through the normal config update flow.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v3.0.0-preview

v3.0.0-preview Release Notes - September 1, 2023

The v3.0.0-preview release is an early preview of Fabric v3.0, specifically to demonstrate and get feedback on the new Byzantine Fault Tolerant (BFT) ordering service.

v3.0.0-preview is not intended to be used in production and is not intended as an upgrade target from prior versions.

New features

Byzantine Fault Tolerant (BFT) ordering service

Hyperledger Fabric has utilized a Raft crash fault tolerant (CFT) ordering service since version v1.4.1.
A Byzantine Fault Tolerant (BFT) ordering service can withstand not only crash failures, but also a subset of nodes behaving maliciously.
Fabric v3.0.0-preview is the first release to provide a BFT ordering service based on the SmartBFT consensus library.
Consider using the BFT orderer if true decentralization is required, where up to and not including a third of the parties running the orderers may not be trusted due to malicious intent or being compromised.
For more details of the BFT ordering service and other recent features, see the What's New documentation.

Improvements and Fixes

All improvements and fixes as of v2.5.4 have also been included in v3.0.0-preview.

Dependencies

Fabric v3.0.0-preview has been tested with the following dependencies:

• Go 1.20.7
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Changes

Support for ordering service system channel has been removed

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability, and operational benefits.
The system channel is removed in Fabric v3.0, as well as the concept of a 'consortium' of organizations that can create channels.
If you used the system channel in prior releases, you must remove the system channel and migrate to the channel participation API before upgrading to v3.x.
For information about removal of the system channel, see the Create a channel without system channel documentation.

Support for 'Solo' consensus ordering service has been removed

The 'Solo' consensus type was intended for test environments only in prior releases and has never been supported for production environments.
Support for 'Solo' consensus has been removed in Fabric v3.0.
For trial environments you can utilize a single node Raft ordering service as demonstrated in the test network tutorial.

Support for 'Kafka' consensus ordering service has been removed

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred production consensus type.
Support for 'Kafka' consensus has been removed in Fabric v3.0.
If you used Kafka consensus in prior releases, you must migrate to Raft consensus prior to upgrading to v3.x.
For details about the migration process, see the Migrating from Kafka to Raft documentation.

Other changes planned for v3.0

Support for specifying orderer endpoints at the global level in channel configuration is deprecated and may be removed.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

Support for configtxgen flag --outputAnchorPeersUpdate is deprecated and may be removed.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

The fabric-tools docker image is deprecated and may be removed

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

Block dissemination via gossip is deprecated and may be removed

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

Legacy chaincode lifecycle is deprecated and may be removed

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.2.13

v2.2.13 Release Notes - August 2, 2023

Fixes

Misconfigured certificate can cause a peer or orderer node to fail

A misconfigured certificate can cause a peer or ordering service node to fail with error:
runtime error: index out of range [1] with length 1.
Additional handling of certificates in Go 1.19 and above did not handle an error condition correctly.
The fix will now log an error failed to traverse certificate verification chain instead of failing the peer or orderer node.
#4324

Dependencies

Fabric v2.2.13 has been tested with the following dependencies:

• Go 1.20.6
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Alpine 3.18.

Deprecations (existing)

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments, however for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications, in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through the normal config update flow.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.4

v2.5.4 Release Notes - August 2, 2023

Fixes

Misconfigured certificate can cause a peer or orderer node to fail

A misconfigured certificate can cause a peer or ordering service node to fail with error:
runtime error: index out of range [1] with length 1.
Additional handling of certificates in Go 1.19 and above did not handle an error condition correctly.
The fix will now log an error failed to traverse certificate verification chain instead of failing the peer or orderer node.
#4320

Orderer startup may fail due to max entry size limit exceeded

An ordering service node with large blocks may fail to start with error:
Failed to create chain support for channel, error: error creating consenter for channel: failed to restore persisted raft data: failed to create or read WAL: failed to read WAL and cannot repair: wal: max entry size limit exceeded.
The version of etcd raft included in Fabric v2.5 had a maximum wal (write-ahead log) entry size of 10MB. The issue has been fixed in later versions of etcd raft. Fabric v2.5.4 updates etcd raft to v3.5.9 which includes the fix.
#4343

Dependencies

Fabric v2.5.4 has been tested with the following dependencies:

• Go 1.20.6
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.3

v2.5.3 Release Notes - June 14, 2023

Fixes

Deadlock can occur on orderer startup while applying raft configuration changes from previous blocks

An ordering service node may get into a deadlock state after startup while applying raft configuration changes from previous blocks.
The ordering service node would need to be restarted in order to make forward progress processing blocks.
This fix ensures that the ordering service node doesn't get into a deadlock state.
#4267

Dependencies

Fabric v2.5.3 has been tested with the following dependencies:

• Go 1.20.5
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.2

v2.5.2 Release Notes - June 2, 2023

Fixes

peer - Fix private data collection update during state database rebuild

The peer may panic if processing a private data collection membership update while rebuilding state database.
This may happen when upgrading from v1.x to v2.x since the state database is rebuilt during the upgrade process.
It may also happen upon restart if the peer has stopped while committing a block to the state database.
The fix ensures that the private data collection update can be processed during state database rebuild.
#4246

Dependencies

Fabric v2.5.2 has been tested with the following dependencies:

• Go 1.20.4
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.2.12

v2.2.12 Release Notes - June 2, 2023

Fixes

peer - Fix private data collection update during state database rebuild

The peer may panic if processing a private data collection membership update while rebuilding state database.
This may happen when upgrading from v1.x to v2.x since the state database is rebuilt during the upgrade process.
It may also happen upon restart if the peer has stopped while committing a block to the state database.
The fix ensures that the private data collection update can be processed during state database rebuild.
#4248

Dependencies

Fabric v2.2.12 has been tested with the following dependencies:

• Go 1.20.4
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Alpine 3.16.

Deprecations (existing)

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments, however for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications, in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through the normal config update flow.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.1

v2.5.1 Release Notes - May 1, 2023

Fixes

Add go binary to fabric-tools docker image

Since the docker images are based on ubuntu rather than golang alpine image starting in v2.5,
the go binary did not exist on the fabric-tools image as it did in prior releases.
This change re-adds the go binary to the fabric-tools image,
which is required if using the fabric-tools image to build and package go chaincodes.
#4177

Dependencies

Fabric v2.5.1 has been tested with the following dependencies:

• Go 1.20.3
• CouchDB v3.3.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.2.11

v2.2.11 Release Notes - April 21, 2023

Improvements

peer - Log peer configuration upon startup

Log effective peer configuration upon startup at info level.
Also log peer environment variables at debug level to help troubleshoot the source of peer config.
#4122

Fixes

peer and orderer - Restore support for PKCS11 MSPs that contain RSA certificate authorities

While Fabric has never supported RSA for transaction signatures or validation,
certificate authorities included in MSP definitions could be associated with
RSA keys. This ability was inadvertently removed during the development of
release 2.0 and prevented migration of some networks to a 2.x version.
v2.2.2 added toleration for RSA public keys in CA certificates for the SW MSP implementation.
This change adds toleration for RSA public keys in CA certificates for the PKCS11 MSP implementation.
#4128

Dependencies

Fabric v2.2.11 updates third party Go dependencies.

Fabric v2.2.11 has been tested with the following dependencies:

• Go 1.20.3
• CouchDB v3.2.2

Fabric docker images on dockerhub utilize Alpine 3.16.

Deprecations (existing)

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments, however for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications, in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through the normal config update flow.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.

v2.5.0

v2.5.0 Release Notes - March 31, 2023

New features

Purge history of private data

While it has always been possible to delete private data from current state, this new feature enables purging the history of private data from a peer while preserving a hash of the private data as immutable evidence on the blockchain.

• Useful for purging private data on demand for privacy reasons or to adhere to government regulations.
• Deletes private data from state and from peer’s private data history so that it can no longer be queried from block events or from other peers.
• Available as a new chaincode API PurgePrivateData().
• Requires setting application capability to V2_5 in channel configuration

For more details, see the Private data documentation.

Improvements

Multi-architecture binaries and docker images are now available

The release binaries and docker images have been updated as follows:

• Support for amd64 and arm64.
• Release binaries are statically linked for maximum portability.
• Docker images utilize dynamically linked binaries and are now based on Ubuntu (rather than Alpine) to make them more consistent with typical production runtime environments (production runtime environments are typically based on glibc and often require dynamic linking of HSM modules).

Orderer configuration SendBufferSize now defaults to 100

Orderer configuration SendBufferSize default has changed from 10 to 100 to improve performance of large workloads.

Peer gateway service now supports seamless resumption of chaincode event listening

Client applications can now resume chaincode event listening after a disconnect and reconnect without receiving any duplicate or missing events.
The client must specify an AfterTransactionId property in addition to a start block number when requesting chaincode events in order to ensure no duplicate or missing events are returned.

Fixes

All fixes as of v2.4.9 are also included in v2.5.0.

Dependencies

Fabric v2.5.0 has been tested with the following dependencies:

• Go 1.20.2
• CouchDB v3.2.2

Fabric docker images on dockerhub utilize Ubuntu 20.04.

Deprecations (existing)

Ordering service system channel is deprecated

v2.3 introduced the ability to manage an ordering service without a system channel.
Managing an ordering service without a system channel has privacy, scalability,
and operational benefits. The use of a system channel is deprecated and may be removed in a future release.
For information about removal of the system channel, see the Create a channel without system channel documentation.

FAB-15754: The 'Solo' consensus type is deprecated.

The 'Solo' consensus type has always been marked non-production and should be in
use only in test environments; however, for compatibility it is still available,
but may be removed entirely in a future release.

FAB-16408: The 'Kafka' consensus type is deprecated.

The 'Raft' consensus type was introduced in v1.4.1 and has become the preferred
production consensus type. There is a documented and tested migration path from
Kafka to Raft, and existing users should migrate to the newer Raft consensus type.
For compatibility with existing deployments, Kafka is still supported,
but may be removed entirely in a future release.
Additionally, the fabric-kafka and fabric-zookeeper docker images are no longer updated, maintained, or published.

Fabric CouchDB image is deprecated

v2.2.0 added support for CouchDB 3.1.0 as the recommended and tested version of CouchDB.
If prior versions are utilized, a Warning will appear in the peer log.
Note that CouchDB 3.1.0 requires that an admin username and password be set,
while this was optional in CouchDB v2.x. See the
Fabric CouchDB documentation
for configuration details.
Also note that CouchDB 3.1.0 default max_document_size is reduced to 8MB. Set a higher value if needed in your environment.
Finally, the fabric-couchdb docker image will not be updated to v3.1.0 and will no longer be updated, maintained, or published.
Users can utilize the official CouchDB docker image maintained by the Apache CouchDB project instead.

FAB-7559: Support for specifying orderer endpoints at the global level in channel configuration is deprecated.

Utilize the new 'OrdererEndpoints' stanza within the channel configuration of an organization instead.
Configuring orderer endpoints at the organization level accommodates
scenarios where orderers are run by different organizations. Using
this configuration ensures that only the TLS CA certificates of that organization
are used for orderer communications; in contrast to the global channel level endpoints which
would cause an aggregation of all orderer TLS CA certificates across
all orderer organizations to be used for orderer communications.

FAB-17428: Support for configtxgen flag --outputAnchorPeersUpdate is deprecated.

The --outputAnchorPeersUpdate mechanism for updating anchor peers has always had
limitations (for instance, it only works the first time anchor peers are updated).
Instead, anchor peer updates should be performed through channel configuration updates.

FAB-15406: The fabric-tools docker image is deprecated

The fabric-tools docker image will not be published in future Fabric releases.
Instead of using the fabric-tools docker image, users should utilize the
published Fabric binaries. The Fabric binaries can be used to make client calls
to Fabric runtime components, regardless of where the Fabric components are running.

FAB-15317: Block dissemination via gossip is deprecated

Block dissemination via gossip is deprecated and may be removed in a future release.
Fabric peers can be configured to receive blocks directly from an ordering service
node, and not gossip blocks, by using the following configuration:

peer.gossip.orgLeader: true
peer.gossip.useLeaderElection: false
peer.gossip.state.enabled: false
peer.deliveryclient.blockGossipEnabled: false

FAB-15061: Legacy chaincode lifecycle is deprecated

The legacy chaincode lifecycle from v1.x is deprecated and will be removed
in a future release. To prepare for the eventual removal, utilize the v2.x
chaincode lifecycle instead, by enabling V2_0 application capability on all
channels, and redeploying all chaincodes using the v2.x lifecycle. The new
chaincode lifecycle provides a more flexible and robust governance model
for chaincodes. For more details see the
documentation for enabling the new lifecycle.