qat_hw_prf.c

/* ====================================================================
 *
 *
 *   BSD LICENSE
 *
 *   Copyright(c) 2022-2024 Intel Corporation.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Intel Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *
 * ====================================================================
 */

/*****************************************************************************
 * @file qat_prf.c
 *
 * This file provides an implementation of the PRF operations for an
 * OpenSSL engine
 *
 *****************************************************************************/
#ifndef _GNU_SOURCE
# define _GNU_SOURCE
#endif

#ifdef QAT_OPENSSL_3
# include <openssl/core_names.h>
# include <openssl/crypto.h>
# include <openssl/obj_mac.h>
# include <openssl/params.h>
#endif

#include <pthread.h>
#include <string.h>
#include <signal.h>
#include <stdarg.h>
#include "qat_hw_prf.h"

#ifdef ENABLE_QAT_FIPS
# include "qat_prov_cmvp.h"
#endif

#include "cpa.h"
#include "cpa_types.h"
#include "cpa_cy_key.h"

#ifdef ENABLE_QAT_FIPS
extern int qat_fips_key_zeroize;
#endif

static EVP_PKEY_METHOD *_hidden_prf_pmeth = NULL;

#ifndef QAT_OPENSSL_3
/* Have a store of the s/w EVP_PKEY_METHOD for software fallback purposes.
 * This is only used for OpenSSL 1.1.1. For OpenSSL 3, we will use the
 * default provider for SW fallback purposes. */
static const EVP_PKEY_METHOD *sw_prf_pmeth = NULL;
#endif

#ifdef ENABLE_QAT_HW_PRF
void qat_prf_pkey_methods(void)
{
    EVP_PKEY_meth_set_init(_hidden_prf_pmeth, qat_tls1_prf_init);
    EVP_PKEY_meth_set_cleanup(_hidden_prf_pmeth, qat_prf_cleanup);
    EVP_PKEY_meth_set_derive(_hidden_prf_pmeth, NULL,
                             qat_prf_tls_derive);
    EVP_PKEY_meth_set_ctrl(_hidden_prf_pmeth, qat_tls1_prf_ctrl, NULL);
}
#endif

EVP_PKEY_METHOD *qat_prf_pmeth(void)
{
    if (_hidden_prf_pmeth) {
        if (!qat_reload_algo)
            return _hidden_prf_pmeth;
        EVP_PKEY_meth_free(_hidden_prf_pmeth);
    }

    if ((_hidden_prf_pmeth =
        EVP_PKEY_meth_new(EVP_PKEY_TLS1_PRF, 0)) == NULL) {
        QATerr(QAT_F_QAT_PRF_PMETH, ERR_R_INTERNAL_ERROR);
        return NULL;
    }

    /* Now save the current (non-offloaded) prf pmeth to sw_prf_pmeth */
    /* for software fallback purposes */
#ifndef QAT_OPENSSL_3
    if ((sw_prf_pmeth = EVP_PKEY_meth_find(EVP_PKEY_TLS1_PRF)) == NULL) {
        QATerr(QAT_F_QAT_PRF_PMETH, ERR_R_INTERNAL_ERROR);
        return NULL;
    }
#endif

#ifdef ENABLE_QAT_HW_PRF
    if (qat_hw_offload && (qat_hw_algo_enable_mask & ALGO_ENABLE_MASK_PRF)) {
        qat_prf_pkey_methods();
        qat_hw_prf_offload = 1;
        DEBUG("QAT HW PRF Registration succeeded\n");
    } else {
        qat_hw_prf_offload = 0;
    }
#endif

    if (!qat_hw_prf_offload) {
#ifndef QAT_OPENSSL_PROVIDER
        DEBUG("QAT HW PRF is disabled, using OpenSSL SW\n");
#endif
#ifndef QAT_OPENSSL_3
        EVP_PKEY_meth_copy(_hidden_prf_pmeth, sw_prf_pmeth);
#else
	/* Although QATEngine supports software fallback to the default provider when
        * using the OpenSSL 3 legacy engine API, if it fails during the registration
        * phase, the pkey method cannot be set correctly because the OpenSSL3 legacy
        * engine framework no longer provides a standard method for HKDF, PRF and SM2.
        * https://github.com/openssl/openssl/issues/19047
        */
# if defined(QAT_OPENSSL_3) && !defined(QAT_OPENSSL_PROVIDER)
#  ifdef ENABLE_QAT_HW_PRF
        qat_openssl3_prf_fallback = 1;
        qat_prf_pkey_methods();
        return _hidden_prf_pmeth;
#  endif
# else
        EVP_PKEY_meth_free(_hidden_prf_pmeth);
        return NULL;
# endif
#endif
    }

    return _hidden_prf_pmeth;
}

#ifdef ENABLE_QAT_HW_PRF
/******************************************************************************
* function:
*        qat_tls1_prf_init(EVP_PKEY_CTX *ctx)
*
* @param ctx   [IN] - PKEY Context structure pointer
*
* @param       [OUT] - Status
*
* description:
*   Qat PRF init function
******************************************************************************/
int qat_tls1_prf_init(EVP_PKEY_CTX *ctx)
{
    QAT_TLS1_PRF_CTX *qat_prf_ctx = NULL;
    int inst_num = QAT_INVALID_INSTANCE;
#ifndef QAT_OPENSSL_3
    int (*sw_init_fn_ptr)(EVP_PKEY_CTX *) = NULL;
    int ret = 0;
#endif

    if (unlikely(ctx == NULL)) {
        WARN("ctx (type EVP_PKEY_CTX) is NULL \n");
        return 0;
    }

#ifndef QAT_OPENSSL_3
    if (qat_get_qat_offload_disabled() || qat_get_sw_fallback_enabled()) {
        DEBUG("- Switched to software mode or fallback mode enabled.\n");
        EVP_PKEY_meth_get_init((EVP_PKEY_METHOD *)sw_prf_pmeth, &sw_init_fn_ptr);
        ret = (*sw_init_fn_ptr)(ctx);
        if (ret != 1) {
            WARN("s/w tls1_prf_init fn failed.\n");
            return 0;
        }
    }
#endif

    qat_prf_ctx = OPENSSL_zalloc(sizeof(*qat_prf_ctx));
    if (qat_prf_ctx == NULL) {
        WARN("Cannot allocate qat_prf_ctx\n");
        return 0;
    }

    if ((inst_num = get_instance(QAT_INSTANCE_SYM, QAT_INSTANCE_ANY))
            != QAT_INVALID_INSTANCE) {
         qat_prf_ctx->qat_svm = !qat_instance_details[inst_num].qat_instance_info.requiresPhysicallyContiguousMemory;
    } else {
        WARN("Failed to get an instance\n");
    }

    if (qat_get_qat_offload_disabled() || qat_get_sw_fallback_enabled())
        qat_prf_ctx->sw_prf_ctx_data = EVP_PKEY_CTX_get_data(ctx);
    EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx);
    return 1;
}


/******************************************************************************
* function:
*         qat_prf_cleanup(EVP_PKEY_CTX *ctx)
*
* @param ctx    [IN] - PKEY Context structure pointer
*
* description:
*   Clear the QAT specific data stored in qat_prf_ctx
******************************************************************************/
void qat_prf_cleanup(EVP_PKEY_CTX *ctx)
{
#ifdef ENABLE_QAT_FIPS
    qat_fips_key_zeroize = 0;
#endif
    QAT_TLS1_PRF_CTX *qat_prf_ctx = NULL;
#ifndef QAT_OPENSSL_3
    void (*sw_cleanup_fn_ptr)(EVP_PKEY_CTX *) = NULL;
#endif

    if (unlikely(ctx == NULL)) {
        WARN("ctx (type EVP_PKEY_CTX) is NULL \n");
        return;
    }

    qat_prf_ctx = (QAT_TLS1_PRF_CTX *)EVP_PKEY_CTX_get_data(ctx);
    if (qat_prf_ctx == NULL) {
        WARN("qat_prf_ctx is NULL\n");
        return;
    }

#ifndef QAT_OPENSSL_3
    if (qat_get_qat_offload_disabled() || qat_get_sw_fallback_enabled()) {
        DEBUG("- Switched to software mode or fallback mode enabled.\n");
        /* Clean up the sw_prf_ctx_data created by the init function */
        EVP_PKEY_meth_get_cleanup((EVP_PKEY_METHOD *)sw_prf_pmeth, &sw_cleanup_fn_ptr);
        EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx->sw_prf_ctx_data);
        (*sw_cleanup_fn_ptr)(ctx);
    }
#endif

    if (!qat_prf_ctx->qat_svm) {
        if (qat_prf_ctx->qat_sec != NULL) {
            OPENSSL_cleanse(qat_prf_ctx->qat_sec, qat_prf_ctx->qat_seclen);
            qaeCryptoMemFreeNonZero(qat_prf_ctx->qat_sec);
        }
        if (qat_prf_ctx->qat_seedlen)
            OPENSSL_cleanse(qat_prf_ctx->qat_seed, qat_prf_ctx->qat_seedlen);
        if (qat_prf_ctx->qat_userLabel != NULL)
            qaeCryptoMemFreeNonZero(qat_prf_ctx->qat_userLabel);
    } else {
        if (qat_prf_ctx->qat_sec != NULL) {
            OPENSSL_cleanse(qat_prf_ctx->qat_sec, qat_prf_ctx->qat_seclen);
            OPENSSL_free(qat_prf_ctx->qat_sec);
        }
        if (qat_prf_ctx->qat_seedlen)
            OPENSSL_cleanse(qat_prf_ctx->qat_seed, qat_prf_ctx->qat_seedlen);
        if (qat_prf_ctx->qat_userLabel != NULL)
            OPENSSL_free(qat_prf_ctx->qat_userLabel);
    }
    OPENSSL_free(qat_prf_ctx);

    EVP_PKEY_CTX_set_data(ctx, NULL);

#ifdef ENABLE_QAT_FIPS
    qat_fips_key_zeroize = 1;
    qat_fips_get_key_zeroize_status();
#endif
}


/******************************************************************************
* function:
*        qat_tls1_prf_ctrl(EVP_PKEY_CTX *ctx,
*                          int type,
*                          int p1,
*                          void *p2)
*
* @param ctx    [IN] - PKEY Context structure pointer
* @param type   [IN] - Type
* @param p1     [IN] - Length/Size
* @param *p2    [IN] - Data
*
* @param       [OUT] - Status
*
* description:
*   Qat PRF control function
******************************************************************************/
int qat_tls1_prf_ctrl(EVP_PKEY_CTX *ctx, int type, int p1, void *p2)
{
    if (unlikely(ctx == NULL)) {
        WARN("Invalid input param.\n");
        return 0;
    }

    QAT_TLS1_PRF_CTX *qat_prf_ctx = (QAT_TLS1_PRF_CTX *)EVP_PKEY_CTX_get_data(ctx);
#ifndef QAT_OPENSSL_3
    int (*sw_ctrl_fn_ptr)(EVP_PKEY_CTX *, int, int, void *) = NULL;
    int ret = 0;
#endif

    if (unlikely(qat_prf_ctx == NULL)) {
         WARN("qat_prf_ctx cannot be NULL\n");
         return 0;
    }

#ifndef QAT_OPENSSL_3
    if (qat_get_qat_offload_disabled() || qat_get_sw_fallback_enabled()) {
        DEBUG("- Switched to software mode or fallback mode enabled.\n");
        EVP_PKEY_meth_get_ctrl((EVP_PKEY_METHOD *)sw_prf_pmeth, &sw_ctrl_fn_ptr, NULL);
        EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx->sw_prf_ctx_data);
        ret = (*sw_ctrl_fn_ptr)(ctx, type, p1, p2);
        EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx);
        if (ret != 1) {
            WARN("S/W tls1_prf_ctrl fn failed\n");
            return 0;
        }
    }
#endif

    switch (type) {
        case EVP_PKEY_CTRL_TLS_MD:
            if (unlikely(p2 == NULL)) {
                WARN("Invalid input param.\n");
                return 0;
            }
            qat_prf_ctx->qat_md = p2;
            return 1;

        case EVP_PKEY_CTRL_TLS_SECRET:
            if (p1 < 0 || p1 > QAT_TLS1_PRF_SECRET_MAXBUF || p2 == NULL) {
                WARN("Either p1 is invalid or p2 is NULL\n");
                return 0;
            }
            if (qat_prf_ctx->qat_sec != NULL) {
                OPENSSL_cleanse(qat_prf_ctx->qat_sec, qat_prf_ctx->qat_seclen);
                QAT_MEM_FREE_NONZERO_BUFF(qat_prf_ctx->qat_sec, qat_prf_ctx->qat_svm);
                qat_prf_ctx->qat_seclen = 0;
            }
            OPENSSL_cleanse(qat_prf_ctx->qat_seed, qat_prf_ctx->qat_seedlen);
            qat_prf_ctx->qat_seedlen = 0;
            qat_prf_ctx->qat_userLabel_len = 0;

            /*-
             * Allocate and copy the secret data
             * In case of zero length secret key (for example EXP cipher),
             * allocate minimum byte aligned size buffer when common memory
             * driver is used.
             */
            if (!qat_prf_ctx->qat_svm)
                qat_prf_ctx->qat_sec = copyAllocPinnedMemory(p2, p1 ? p1 : 1, __FILE__, __LINE__);
            else
                qat_prf_ctx->qat_sec = OPENSSL_memdup(p2, p1 ? p1 : 1);
            if (qat_prf_ctx->qat_sec == NULL) {
                WARN("secret data malloc failed\n");
                return 0;
            }
            qat_prf_ctx->qat_seclen = p1;
            return 1;

        case EVP_PKEY_CTRL_TLS_SEED:
            if (p1 == 0 || p2 == NULL)
                return 1;
            if (qat_prf_ctx->qat_userLabel_len == 0) {
                if (p1 < 0 || p1 > QAT_TLS1_PRF_LABEL_MAXBUF) {
                    WARN("userLabel p1 %d is out of range\n", p1);
                    return 0;
                } else {
                    if (!qat_prf_ctx->qat_svm) {
                        if (qat_prf_ctx->qat_userLabel != NULL)
                            qaeCryptoMemFreeNonZero(qat_prf_ctx->qat_userLabel);
                        qat_prf_ctx->qat_userLabel = copyAllocPinnedMemory(p2, p1,
                                __FILE__, __LINE__);
                    } else {
                        if (qat_prf_ctx->qat_userLabel != NULL)
                            OPENSSL_free(qat_prf_ctx->qat_userLabel);
                        qat_prf_ctx->qat_userLabel = OPENSSL_memdup(p2, p1);
                    }

                    if (qat_prf_ctx->qat_userLabel == NULL) {
                        WARN("userLabel malloc failed\n");
                        return 0;
                    }
                    qat_prf_ctx->qat_userLabel_len = p1;
                }
            } else {
                if (p1 < 0 || p1 > (QAT_TLS1_PRF_SEED_MAXBUF - qat_prf_ctx->qat_seedlen)) {
                    WARN("p1 %d is out of range\n", p1);
                    return 0;
                } else {
                    memcpy(qat_prf_ctx->qat_seed + qat_prf_ctx->qat_seedlen, p2, p1);
                    qat_prf_ctx->qat_seedlen += p1;
                }
            }
            return 1;
        default:
            WARN("Invalid type %d\n", type);
            return -2;
    } /* switch */
}


/******************************************************************************
 * function:
 *         void qat_prf_cb(
 *                   void *pCallbackTag,
 *                   CpaStatus status,
 *                   void *pOpdata,
 *                   CpaFlatBuffer *pOut)
 *
 * @param pCallbackTag   [IN]  - Pointer to user data
 * @param status         [IN]  - Status of the operation
 * @param pOpData        [IN]  - Pointer to operation data of the request
 * @param out            [IN]  - Pointer to the output buffer
 *
 * description:
 *   Callback to indicate the completion of PRF
 ******************************************************************************/
static void qat_prf_cb(void *pCallbackTag, CpaStatus status,
                       void *pOpData, CpaFlatBuffer * pOut)
{
    if (enable_heuristic_polling) {
        QAT_ATOMIC_DEC(num_kdf_requests_in_flight);
    }
    qat_crypto_callbackFn(pCallbackTag, status, CPA_CY_SYM_OP_CIPHER, pOpData,
                          NULL, CPA_TRUE);
}


/******************************************************************************
* function:
*         qat_get_hash_algorithm(
*                   PRF *qat_prf_ctx
*                   CpaCySymHashAlgorithm *hash_algorithm)
*
* @param qat_prf_ctx    [IN]  - PRF context
* @param hash_algorithm [OUT] - Ptr to hash algorithm in CPA format
*
* description:
*   Retrieve the hash algorithm from the prf context and convert it to
*   the CPA format
******************************************************************************/
static int qat_get_hash_algorithm(QAT_TLS1_PRF_CTX * qat_prf_ctx,
                                  CpaCySymHashAlgorithm * hash_algorithm)
{
    const EVP_MD *md = NULL;
    if (qat_prf_ctx == NULL || hash_algorithm == NULL) {
        WARN("Either qat_prf_ctx %p or  hash_algorithm %p is NULL\n",
              qat_prf_ctx, hash_algorithm);
        return 0;
    }

    md = qat_prf_ctx->qat_md;
    if (md == NULL) {
        WARN("md is NULL.\n");
        return 0;
    }

    switch (EVP_MD_type(md)) {
        case NID_sha224:
            *hash_algorithm = CPA_CY_SYM_HASH_SHA224;
            break;
        case NID_sha256:
            *hash_algorithm = CPA_CY_SYM_HASH_SHA256;
            break;
        case NID_sha384:
            *hash_algorithm = CPA_CY_SYM_HASH_SHA384;
            break;
        case NID_sha512:
            *hash_algorithm = CPA_CY_SYM_HASH_SHA512;
            break;
        case NID_md5:
            *hash_algorithm = CPA_CY_SYM_HASH_MD5;
            break;

#if defined(QAT20_OOT)
        case NID_sm3:
            *hash_algorithm = CPA_CY_SYM_HASH_SM3;
            break;
#endif

        default:
            WARN("unsupported PRF hash type\n");
            return 0;
    }

    return 1;
}

/******************************************************************************
* function:
*         build_tls_prf_op_data(
*                   PRF *qat_prf_ctx,
*                   CpaCyKeyGenTlsOpData *prf_op_data)
*
* @param qat_prf_ctx    [IN]  - PRF context
* @param prf_op_data    [OUT] - Ptr to TlsOpData used as destination
*
* description:
*   Build the TlsOpData based on the values stored in the PRF context
*   Note: prf_op_data must be allocated outside this function
******************************************************************************/
static int build_tls_prf_op_data(QAT_TLS1_PRF_CTX * qat_prf_ctx,
                                 CpaCyKeyGenTlsOpData * prf_op_data)
{
    const void *label = NULL;
    if (qat_prf_ctx == NULL || prf_op_data == NULL) {
        WARN("Either qat_prf_ctx %p or prf_op_data %p is NULL\n", qat_prf_ctx, prf_op_data);
        return 0;
    }

    prf_op_data->secret.pData = (Cpa8U *) qat_prf_ctx->qat_sec;
    prf_op_data->secret.dataLenInBytes = qat_prf_ctx->qat_seclen;

    /*-
     * The label is stored in userLabel as a string Conversion from string to CPA
     * constant
     */
    label = qat_prf_ctx->qat_userLabel;
    DEBUG("Value of label = %s\n", (char *)label);

    prf_op_data->userLabel.pData = NULL;
    prf_op_data->userLabel.dataLenInBytes = 0;
    prf_op_data->seed.pData = NULL;

    if (0 ==
        strncmp(label, TLS_MD_MASTER_SECRET_CONST,
                TLS_MD_MASTER_SECRET_CONST_SIZE)) {
        prf_op_data->tlsOp = (CpaCyKeyTlsOp) CPA_CY_KEY_SSL_OP_MASTER_SECRET_DERIVE;
    } else if (0 ==
               strncmp(label, TLS_MD_KEY_EXPANSION_CONST,
                       TLS_MD_KEY_EXPANSION_CONST_SIZE)) {
        prf_op_data->tlsOp = (CpaCyKeyTlsOp) CPA_CY_KEY_TLS_OP_KEY_MATERIAL_DERIVE;
    } else if (0 ==
               strncmp(label, TLS_MD_CLIENT_FINISH_CONST,
                       TLS_MD_CLIENT_FINISH_CONST_SIZE)) {
        prf_op_data->tlsOp = (CpaCyKeyTlsOp) CPA_CY_KEY_TLS_OP_CLIENT_FINISHED_DERIVE;
    } else if (0 ==
               strncmp(label, TLS_MD_SERVER_FINISH_CONST,
                       TLS_MD_SERVER_FINISH_CONST_SIZE)) {
        prf_op_data->tlsOp = (CpaCyKeyTlsOp) CPA_CY_KEY_TLS_OP_SERVER_FINISHED_DERIVE;
    } else {
        /* Allocate and copy the user label contained in userLabel */
        /* TODO we must test this case to see if it works OK */
        DEBUG("Using USER_DEFINED label = %s\n", (char*)label);
        prf_op_data->tlsOp = (CpaCyKeyTlsOp) CPA_CY_KEY_TLS_OP_USER_DEFINED;
        prf_op_data->userLabel.pData = (Cpa8U *) qat_prf_ctx->qat_userLabel;
	if (qat_prf_ctx->qat_seedlen == 0) {
	    qat_prf_ctx->qat_seedlen = qat_prf_ctx->qat_userLabel_len;
	    memcpy(qat_prf_ctx->qat_seed, qat_prf_ctx->qat_userLabel, qat_prf_ctx->qat_seedlen);
	}
	else
            prf_op_data->userLabel.dataLenInBytes = qat_prf_ctx->qat_userLabel_len;
    }

    /*-
     * The seed for prf_op_data is obtained by concatenating seed2...5 in the
     * context.
     * The client and server randoms are reversed on the QAT API for Key
     * Derive. This is not be a problem because OpenSSL calls the function
     * with the variables in the correct order
     */

    if (qat_prf_ctx->qat_seedlen) {
        if (!qat_prf_ctx->qat_svm) {
            prf_op_data->seed.pData = copyAllocPinnedMemory(qat_prf_ctx->qat_seed,
                                                            qat_prf_ctx->qat_seedlen,
                                                            __FILE__, __LINE__);
        } else {
            prf_op_data->seed.pData = OPENSSL_memdup(qat_prf_ctx->qat_seed,
                                                     qat_prf_ctx->qat_seedlen);
        }
        if (prf_op_data->seed.pData == NULL) {
            /* On failure WARN and Error are flagged at the next level up.*/
            return 0;
        }
        prf_op_data->seed.dataLenInBytes = qat_prf_ctx->qat_seedlen;
    }
    return 1;
}

#ifdef QAT_OPENSSL_3
/******************************************************************************
* function:
*         default_provider_PRF_derive(QAT_TLS1_PRF_CTX *qat_prf_ctx,
*                                      unsigned char *out,
*                                      size_t olen)
*
* @param qat_prf_ctx     [IN]  - PRF context
* @param out             [OUT] - Ptr to the key that will be generated
* @param olen            [IN]  - Length of the key
*
* description:
*   PRF SW fallback function. Using default provider of OpenSSL 3
******************************************************************************/
int default_provider_PRF_derive(QAT_TLS1_PRF_CTX *qat_prf_ctx, unsigned char *out, size_t olen) {
    int rv = 0;
    EVP_KDF *kdf = NULL;
    EVP_KDF_CTX *kctx = NULL;
    OSSL_PARAM params[5], *p = params;
    const char *mdname;

    /* Fetch the key derivation function implementation */
    kdf = EVP_KDF_fetch(NULL, "TLS1-PRF", "provider=default");
    if (kdf == NULL) {
        fprintf(stderr, "EVP_KDF_fetch() returned NULL\n");
        goto end;
    }

    /* Create a context for the key derivation operation */
    kctx = EVP_KDF_CTX_new(kdf);
    if (kctx == NULL) {
        fprintf(stderr, "EVP_KDF_CTX_new() returned NULL\n");
        goto end;
    }

    mdname = EVP_MD_get0_name(qat_prf_ctx->qat_md);

    *p++ = OSSL_PARAM_construct_utf8_string(OSSL_KDF_PARAM_DIGEST, (char *)mdname, 0);
    *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_SECRET, qat_prf_ctx->qat_sec,
                                             qat_prf_ctx->qat_seclen);
    *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_SEED, qat_prf_ctx->qat_userLabel,
                                                qat_prf_ctx->qat_userLabel_len);
    *p++ = OSSL_PARAM_construct_octet_string(OSSL_KDF_PARAM_SEED, qat_prf_ctx->qat_seed,
                                                qat_prf_ctx->qat_seedlen);
    *p = OSSL_PARAM_construct_end();

    /* Derive the key */
    if (EVP_KDF_derive(kctx, out, olen, params) != 1) {
        fprintf(stderr, "EVP_KDF_derive() failed\n");
        goto end;
    }

    rv = 1;
end:
    EVP_KDF_CTX_free(kctx);
    EVP_KDF_free(kdf);
    return rv;
}
#endif

/******************************************************************************
* function:
*         qat_prf_tls_derive(
*                   QAT_TLS1_PRF_CTX *qat_prf_ctx,
*                   unsigned char *key,
*                   size_t *olen)
*
*
* @param qat_prf_ctx    [IN]  - PRF context
* @param key            [OUT] - Ptr to the key that will be generated
* @param olen           [IN]  - Length of the key
*
* description:
*   PRF derive function for TLS case
******************************************************************************/
int qat_prf_tls_derive(EVP_PKEY_CTX *ctx, unsigned char *key, size_t *olen)
{
    int ret = 0, job_ret = 0;
    CpaCyKeyGenTlsOpData prf_op_data;
    CpaFlatBuffer *generated_key = NULL;
    CpaStatus status = CPA_STATUS_FAIL;
    QAT_TLS1_PRF_CTX *qat_prf_ctx = NULL;
    CpaCySymHashAlgorithm hash_algo = CPA_CY_SYM_HASH_NONE;
    int key_length = 0;
    int md_nid = 0;
    op_done_t op_done;
    int qatPerformOpRetries = 0;
    int iMsgRetry = getQatMsgRetryCount();
    unsigned long int ulPollInterval = getQatPollInterval();
    int inst_num = QAT_INVALID_INSTANCE;
    thread_local_variables_t *tlv = NULL;
    int fallback = 0;
#ifndef QAT_OPENSSL_3
    int (*sw_derive_fn_ptr)(EVP_PKEY_CTX *, unsigned char *, size_t *) = NULL;
#endif

    if (unlikely(NULL == ctx || NULL == key || NULL == olen)) {
        WARN("Either ctx %p, key %p or olen %p is NULL\n", ctx, key, olen);
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_PASSED_NULL_PARAMETER);
        return ret;
    }

#ifdef ENABLE_QAT_FIPS
    qat_fips_get_approved_status();
#endif
    qat_prf_ctx = (QAT_TLS1_PRF_CTX *)EVP_PKEY_CTX_get_data(ctx);
    if (qat_prf_ctx == NULL) {
        WARN("qat_prf_ctx is NULL\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        return ret;
    }

    if ((qat_prf_ctx->qat_md == NULL) || (qat_prf_ctx->qat_sec == NULL) ||
        ((qat_prf_ctx->qat_seedlen == 0) && qat_prf_ctx->qat_userLabel_len == 0)) {
        WARN("Either md %p, secret %p, or seedlen %zu userLabel_len %zu is ZERO\n",
             qat_prf_ctx->qat_md, qat_prf_ctx->qat_sec,
             qat_prf_ctx->qat_seedlen, qat_prf_ctx->qat_userLabel_len);
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_PASSED_NULL_PARAMETER);
        return ret;
    }

    memset(&prf_op_data, 0, sizeof(CpaCyKeyGenTlsOpData));
    key_length = *olen;
    md_nid = EVP_MD_type(qat_prf_ctx->qat_md);
#if defined(QAT_OPENSSL_3) && !defined(QAT_OPENSSL_PROVIDER)
    if (qat_openssl3_prf_fallback == 1) {
        DEBUG("- Switched to software mode\n");
        fallback = 1;
        goto err;
    }
#endif

    DEBUG("QAT HW PRF Started\n");

    if (qat_get_qat_offload_disabled()) {
        DEBUG("- Switched to software mode\n");
        fallback = 1;
        goto err;
    }

#ifdef QAT_DRIVER_INTREE
    if (md_nid == NID_md5_sha1) {
        if (qat_get_sw_fallback_enabled()){
            DEBUG("TLS < 1.2 not supported. Fallback to software\n");
            fallback = 1;
            goto err;
        }
        WARN("TLS < 1.2 not supported in the in-tree driver\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        goto err;
    }
#endif

    /*
     * Only required for TLS1.2 as previous versions always use MD5 and SHA-1
     */
    if (md_nid != NID_md5_sha1) {
        if (!qat_get_hash_algorithm(qat_prf_ctx, &hash_algo)) {
            WARN("Failed to get hash algorithm\n");
            QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
            return ret;
        }
    }

    if ((inst_num = get_instance(QAT_INSTANCE_SYM, QAT_INSTANCE_ANY))
            == QAT_INVALID_INSTANCE) {
        WARN("Failed to get an instance\n");
        if (qat_get_sw_fallback_enabled()) {
            CRYPTO_QAT_LOG("Failed to get an instance - fallback to SW - %s\n", __func__);
            fallback = 1;
            goto err;
        } else {
            QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
            return 0;
        }
    }
    qat_prf_ctx->qat_svm = !qat_instance_details[inst_num].qat_instance_info.requiresPhysicallyContiguousMemory;

    /* ---- Tls Op Data ---- */
    if (!build_tls_prf_op_data(qat_prf_ctx, &prf_op_data)) {
        WARN("Error building TlsOpdata\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        goto err;
    }

    /* ---- Generated Key ---- */
    prf_op_data.generatedKeyLenInBytes = key_length;

    generated_key = (CpaFlatBuffer *) qat_mem_alloc(sizeof(CpaFlatBuffer),
                                      qat_prf_ctx->qat_svm, __FILE__, __LINE__);
    if (NULL == generated_key) {
        WARN("Failed to allocate memory for generated_key\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_MALLOC_FAILURE);
        goto err;
    }

    generated_key->pData =
            (Cpa8U *) qat_mem_alloc(key_length, qat_prf_ctx->qat_svm, __FILE__, __LINE__);
    if (NULL == generated_key->pData) {
        WARN("Failed to allocate memory for generated_key data\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_MALLOC_FAILURE);
        goto err;
    }
    generated_key->dataLenInBytes = key_length;

    /* ---- Perform the operation ---- */
    DUMP_PRF_OP_DATA(prf_op_data);

    tlv = qat_check_create_local_variables();
    if (NULL == tlv) {
        WARN("could not create local variables\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        goto err;
    }

    qat_init_op_done(&op_done);
    if (op_done.job != NULL) {
        if (qat_setup_async_event_notification(op_done.job) == 0) {
            WARN("Failed to setup async event notification\n");
            QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
            qat_cleanup_op_done(&op_done);
            goto err;
        }
    }

    do {
        DUMP_KEYGEN_TLS(qat_instance_handles[inst_num], generated_key);
        /* Call the function of CPA according the to the version of TLS */
        if (md_nid != NID_md5_sha1) {
            DEBUG("Calling cpaCyKeyGenTls2 \n");
            status =
                cpaCyKeyGenTls2(qat_instance_handles[inst_num], qat_prf_cb,
                                &op_done, &prf_op_data, hash_algo,
                                generated_key);
        } else {
            DEBUG("Calling cpaCyKeyGenTls \n");
            status =
                cpaCyKeyGenTls(qat_instance_handles[inst_num], qat_prf_cb, &op_done,
                               &prf_op_data, generated_key);
        }

        if (status == CPA_STATUS_RETRY) {
            if (op_done.job == NULL) {
                usleep(ulPollInterval +
                       (qatPerformOpRetries %
                        QAT_RETRY_BACKOFF_MODULO_DIVISOR));
                qatPerformOpRetries++;
                if (iMsgRetry != QAT_INFINITE_MAX_NUM_RETRIES) {
                    if (qatPerformOpRetries >= iMsgRetry) {
                        WARN("No. of retries exceeded max retry : %d\n", iMsgRetry);
                        break;
                    }
                }
            } else {
                if ((qat_wake_job(op_done.job, ASYNC_STATUS_EAGAIN) == 0) ||
                    (qat_pause_job(op_done.job, ASYNC_STATUS_EAGAIN) == 0)) {
                    WARN("qat_wake_job or qat_pause_job failed\n");
                    break;
                }
            }
        }

    } while (status == CPA_STATUS_RETRY);

    if (CPA_STATUS_SUCCESS != status) {
        WARN("Failed to submit request to qat - status = %d\n", status);
        if (qat_get_sw_fallback_enabled() &&
            (status == CPA_STATUS_RESTARTING || status == CPA_STATUS_FAIL)) {
            CRYPTO_QAT_LOG("Failed to submit request to qat inst_num %d device_id %d - fallback to SW - %s\n",
                           inst_num,
                           qat_instance_details[inst_num].qat_instance_info.physInstId.packageId,
                           __func__);
            fallback = 1;
        } else if (status == CPA_STATUS_UNSUPPORTED) {
            WARN("Algorithm Unsupported in QAT_HW! Using OpenSSL SW\n");
            fallback = 1;
        } else {
            QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        }
        if (op_done.job != NULL) {
            qat_clear_async_event_notification(op_done.job);
        }
        qat_cleanup_op_done(&op_done);
        goto err;
    }

    QAT_INC_IN_FLIGHT_REQS(num_requests_in_flight, tlv);
    if (qat_use_signals()) {
        if (tlv->localOpsInFlight == 1) {
            if (sem_post(&hw_polling_thread_sem) != 0) {
                WARN("hw sem_post failed!, hw_polling_thread_sem address: %p.\n",
                      &hw_polling_thread_sem);
                QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
                QAT_DEC_IN_FLIGHT_REQS(num_requests_in_flight, tlv);
                goto err;
            }
        }
    }

    if (qat_get_sw_fallback_enabled()) {
        CRYPTO_QAT_LOG("Submit success qat inst_num %d device_id %d - %s\n",
                       inst_num,
                       qat_instance_details[inst_num].qat_instance_info.physInstId.packageId,
                       __func__);
    }

    if (enable_heuristic_polling) {
        QAT_ATOMIC_INC(num_kdf_requests_in_flight);
    }

    do {
        if(op_done.job != NULL) {
            /* If we get a failure on qat_pause_job then we will
               not flag an error here and quit because we have
               an asynchronous request in flight.
               We don't want to start cleaning up data
               structures that are still being used. If
               qat_pause_job fails we will just yield and
               loop around and try again until the request
               completes and we can continue. */
            if ((job_ret = qat_pause_job(op_done.job, ASYNC_STATUS_OK)) == 0)
                sched_yield();
        } else {
            sched_yield();
        }
    }
    while (!op_done.flag ||
           QAT_CHK_JOB_RESUMED_UNEXPECTEDLY(job_ret));

    DUMP_KEYGEN_TLS_OUTPUT(generated_key);
    QAT_DEC_IN_FLIGHT_REQS(num_requests_in_flight, tlv);

    if (op_done.verifyResult != CPA_TRUE) {
        WARN("Verification of result failed\n");
        if (qat_get_sw_fallback_enabled() && op_done.status == CPA_STATUS_FAIL) {
            CRYPTO_QAT_LOG("Verification of result failed for qat inst_num %d device_id %d - fallback to SW - %s\n",
                           inst_num,
                           qat_instance_details[inst_num].qat_instance_info.physInstId.packageId,
                           __func__);
            fallback = 1;
        } else {
            QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        }
        qat_cleanup_op_done(&op_done);
        goto err;
    }

    qat_cleanup_op_done(&op_done);

    DUMPL("Generated key", generated_key->pData, key_length);

    if (unlikely(generated_key->pData == NULL)) {
        WARN("generated_key->pData is NULL\n");
        QATerr(QAT_F_QAT_PRF_TLS_DERIVE, ERR_R_INTERNAL_ERROR);
        goto err;
    }

    memcpy(key, generated_key->pData, key_length);

    ret = 1;

 err:
    /* Free the memory  */
    if (prf_op_data.seed.pData) {
        OPENSSL_cleanse(prf_op_data.seed.pData, prf_op_data.seed.dataLenInBytes);
        QAT_MEM_FREE_BUFF(prf_op_data.seed.pData, qat_prf_ctx->qat_svm);
    }
    if (NULL != generated_key) {
        QAT_CLEANSE_MEMFREE_NONZERO_FLATBUFF(*generated_key, qat_prf_ctx->qat_svm);
        QAT_MEM_FREE_BUFF(generated_key, qat_prf_ctx->qat_svm);
    }
    if (fallback) {
        WARN("- Fallback to software mode.\n");
        CRYPTO_QAT_LOG("Resubmitting request to SW - %s\n", __func__);
#ifndef QAT_OPENSSL_3
        EVP_PKEY_meth_get_derive((EVP_PKEY_METHOD *)sw_prf_pmeth, NULL, &sw_derive_fn_ptr);
        EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx->sw_prf_ctx_data);
        ret = (*sw_derive_fn_ptr)(ctx, key, olen);
        EVP_PKEY_CTX_set_data(ctx, qat_prf_ctx);
#else
        ret = default_provider_PRF_derive(qat_prf_ctx, key, *olen);
#endif
    }
    return ret;
}
#endif /* ENABLE_QAT_HW_PRF */