When using remote lists like this or this it's a hassle to manually check for changes and update - this script will do that for you!
User-created entries will not be touched and those removed from the remote list will be disabled instead.
If you're not using remote lists like the ones mentioned above then this script will be useless to you - Pi-hole already updates the lists weekly automatically.
- Pi-hole V5 installed (fresh install preferred)
- php-cli >=7.0 and a few extensions (
sudo apt-get install php-cli php-sqlite3 php-intl php-curl) - systemd is optional but recommended
Docker users - look below.
This command will install this script to /usr/local/sbin:
wget -O - https://raw.githubusercontent.com/jacklul/pihole-updatelists/master/install.sh | sudo bashAlternatively you can clone this repo and sudo bash install.sh.
If systemd is available this script will also add service and timer unit files to the system, otherwise a crontab entry in /etc/cron.d/pihole-updatelists will be created.
If for some reasons the install script does not copy service and timer files while your distro has systemd scheduler available you can force the installation by passing systemd as a parameter to the install script - modifying the install command above with sudo bash -s systemd instead.
Note that in most cases you will be able to execute this script globally as pihole-updatelists command but some will require you to add /usr/local/sbin to $PATH or execute it via /usr/local/sbin/pihole-updatelists.
This script does nothing by default (except running pihole updateGravity), you have to configure it.
You can quickly update the script with sudo pihole-updatelists --update which checks for script difference and re-runs the install script when needed.
If you don't plan on updating adlists or want to keep Pi-hole's gravity update schedule you should skip this section and set UPDATE_GRAVITY=false in the configuration file.
You should disable entry with pihole updateGravity command in /etc/cron.d/pihole as this script already runs it:
sudo nano /etc/cron.d/piholePut a # before this line (numbers might be different):
#49 4 * * 7 root PATH="$PATH:/usr/local/bin/" pihole updateGravity >/var/log/pihole_updateGravity.log || cat /var/log/pihole_updateGravity.log
Alternatively, the following sed command will disable the same entry:
sudo sed -e '/pihole updateGravity/ s/^#*/#/' -i /etc/cron.d/piholeYou might have to do this after each Pi-hole update.
You can override pihole-FTL.service to disable the cron entry automatically after each update:
sudo systemctl edit pihole-FTL.service[Service]
ExecStartPre=-/bin/sh -c "[ -w /etc/cron.d/pihole ] && /bin/sed -e '/pihole updateGravity/ s/^#*/#/' -i /etc/cron.d/pihole"
If you already imported any of the remote lists manually you should migrate their entries to allow the script to disable them in case they are removed from the remote list.
If you used pihole5-list-tool to import adlists and whitelist you can use these commands to do this quickly:
sudo sqlite3 /etc/pihole/gravity.db "UPDATE adlist SET comment = 'Managed by pihole-updatelists' WHERE comment LIKE '%Firebog |%' OR comment LIKE '%[ph5lt]'"
sudo sqlite3 /etc/pihole/gravity.db "UPDATE domainlist SET comment = 'Managed by pihole-updatelists' WHERE comment LIKE '%AndeepND |%' OR comment LIKE '%[ph5lt]'"(code up to date as of pihole5-list-tool 0.6.0)
Alternatively, some manual work is required - pick one:
- Manually modify comment field of all imported domains/adlists to match the one this script uses (see
COMMENTvariable in Configuration section) (recommended but might be a lot of work) - Manually delete all imported domains/adlists from the web interface (might be a lot of work)
- Wipe all adlists and domains (not recommended but fast - use this if you want to start fresh)
- backup your lists and custom entries (write them down somewhere, do not use the Teleporter)
- run the following commands:
sudo sqlite3 /etc/pihole/gravity.db "DELETE FROM adlist" sudo sqlite3 /etc/pihole/gravity.db "DELETE FROM adlist_by_group" sudo sqlite3 /etc/pihole/gravity.db "DELETE FROM domainlist" sudo sqlite3 /etc/pihole/gravity.db "DELETE FROM domainlist_by_group"
- keep reading and configure the script then run
sudo pihole-updateliststo finish up - (only when
UPDATE_GRAVITY=false) runpihole updateGravity
Follow the official instructions but use jacklul/pihole:latest image instead, pass configuration variables as environment variables in docker-compose.yml.
If you need to pull a specific version of Pi-hole image you have no other choice but to use custom Dockerfile.
Use jacklul/pihole:latest image instead of pihole/pihole:latest. Version-specific tags are also available but keep in mind they will contain version of the script that was available at the time of that particular version.
If you don't want to use my image you can write custom Dockerfile:
FROM pihole/pihole:latest
RUN apt-get update && apt-get install -Vy wget php-cli php-sqlite3 php-intl php-curl
RUN wget -O - https://raw.githubusercontent.com/jacklul/pihole-updatelists/master/install.sh | bash -s docker
Then build your image locally and use that image in your docker-composer.yml or launch command line.
You will have to update your local image manually each time update is released.
Your docker-compose.yml file should look similar to this:
version: "3"
services:
pihole:
container_name: pihole
image: jacklul/pihole:latest
ports:
- "53:53/tcp"
- "53:53/udp"
- "67:67/udp"
- "80:80/tcp"
environment:
TZ: 'America/Chicago'
ADLISTS_URL: 'https://v.firebog.net/hosts/lists.php?type=tick'
WHITELIST_URL: 'https://raw.githubusercontent.com/anudeepND/whitelist/master/domains/whitelist.txt'
#REGEX_WHITELIST_URL: ''
#BLACKLIST_URL: ''
REGEX_BLACKLIST_URL: 'https://raw.githubusercontent.com/mmotti/pihole-regex/master/regex.list'
volumes:
- './etc-pihole/:/etc/pihole/'
- './etc-dnsmasq.d/:/etc/dnsmasq.d/'
# If you need advanced configuration create a mount to access the config file:
#- './etc-pihole-updatelists/:/etc/pihole-updatelists/'
cap_add:
- NET_ADMIN
restart: unless-stopped(for more up to date docker-compose.yml see pi-hole/docker-pi-hole)
If you already have existing gravity.db you should also check out Migrating lists and domains section, keep in mind that you will have to adjust paths in the commands mentioned there.
Docker start script uses these extra environment variables:
PHUL_DNSCHECK_DOMAIN- the domain tonslookupto check whenever DNS resolution is available (pi.holeby default)PHUL_DNSCHECK_TIMELIMIT- maximum time to wait for the DNS resolution to become available (300seconds by default)
Default configuration file is /etc/pihole-updatelists.conf.
sudo nano /etc/pihole-updatelists.conf| Variable | Default | Description |
|---|---|---|
| ADLISTS_URL | " " | Remote list URL containing list of adlists to import URLs to single adlists are supported but it might be better if you add them manually |
| WHITELIST_URL | " " | Remote list URL containing exact domains to whitelist |
| REGEX_WHITELIST_URL | " " | Remote list URL containing regex rules for whitelisting |
| BLACKLIST_URL | " " | Remote list URL containing exact domains to blacklist This is specifically for handcrafted lists only, do not use regular blocklists here! |
| REGEX_BLACKLIST_URL | " " | Remote list URL containing regex rules for blacklisting |
| COMMENT | "Managed by pihole-updatelists" | Comment string used to know which entries were created by the script You can still add your own comments to individual entries as long you keep this string intact |
| GROUP_ID | 0 | Assign additional group to all inserted entries, to assign only the specified group (do not add to the default) make the number negative 0 is the default group, you can view ID of the group in Pi-hole's web interface by hovering mouse cursor over group name field on the 'Group management' page Multiple groups are not supported |
| PERSISTENT_GROUP | true | Makes sure entries have the specified group assigned on each script run This does not prevent you from assigning more groups through the web interface but can remove entries from the default group if GROUP_ID is a negative number When disabled but an entry has no groups assigned and is about to be enabled then it will be re-added to the groups it's supposed to be in WARNING: This option might be buggy when running multiple different configurations with same lists |
| REQUIRE_COMMENT | true | Prevent touching entries not created by this script by comparing comment field When false any user-created entry will be disabled, only those created by the script will be active |
| MIGRATION_MODE | 1 | Decides how to migrate disabled entries from another config sections 1 - replace comment field 2 - append to comment field 0 - disables migration, entry will be ignored |
| GROUP_EXCLUSIVE | false | Causes defined group in GROUP_ID to contain one defined list exclusively - only entries from the last list inserted will be enabled This option is experimental |
| UPDATE_GRAVITY | true | Update gravity after lists are updated? (runs pihole updateGravity) When false invokes lists reload instead Set to null to do nothing |
| VERBOSE | false | Show more information while the script is running |
| DEBUG | false | Show debug messages for troubleshooting purposes If you're having issues - this might help tracking it down |
| DOWNLOAD_TIMEOUT | 60 | Maximum time in seconds one list download can take before giving up You should increase this when downloads fail because of timeout |
| IGNORE_DOWNLOAD_FAILURE | false | Ignore download failures when using multiple lists This will cause entries from the lists that failed to download to be disabled |
| GRAVITY_DB | "/etc/pihole/gravity.db" | Path to gravity.db in case you need to change it |
| LOCK_FILE | "/var/lock/pihole-updatelists.lock" | Process lockfile to prevent multiple instances of the script from running You shouldn't change it - unless /var/lock is unavailable |
| LOG_FILE | " " | Log console output to file In most cases you don't have to set this as you can view full log in the system journal Put - before path to overwrite file instead of appending to it |
| PIHOLE_CMD | "/usr/local/bin/pihole" | Path to pihole script, Change this only if it isn't in the default location |
| GIT_BRANCH | "master" | Branch to pull remote checksum and update from |
String values should be put between " ", otherwise weird things might happen.
You can also give paths to the local files instead of URLs, for example setting WHITELIST_URL to /home/pi/whitelist.txt will fetch this file from filesystem.
It is also possible to load configuration variables from the environment by using --env parameter - this will overwrite values in default section of the config file.
Some variables will have to be prefixed with PHUL_ for compatibility:
CONFIG_FILE, GRAVITY_DB, LOCK_FILE, PIHOLE_CMD, LOG_FILE, VERBOSE, DEBUG, GIT_BRANCH
You can specify alternative config file by passing the path to the script through config parameter: pihole-updatelists --config=/home/pi/pihole-updatelists2.conf - this combined with different COMMENT string can allow multiple script configurations for the same Pi-hole instance.
A more advanced way is to use sections in the configuration file:
Warning: this method can sometimes be buggy or have weird behaviors!
(bottom of the file)
[GroupA_adlists]
WHITELIST_URL="https://raw.githubusercontent.com/you/adlists/master/my_whitelist1.txt"
GROUP_ID=-1
COMMENT="pihole-updatelists - whitelist1"
[GroupB_adlists]
WHITELIST_URL="https://raw.githubusercontent.com/you/adlists/master/my_whitelist2.txt"
GROUP_ID=-2
COMMENT="pihole-updatelists - whitelist2"
Configurations where one of the lists contains entries from the other are not officially supported but may work:
; When one of the lists contains entries from the other
; it's best to have it defined after the other one
; Group with ID=1 will use 'tick' list of adlists
[GroupA_adlists]
ADLISTS_URL="https://v.firebog.net/hosts/lists.php?type=tick"
GROUP_ID=-1
COMMENT="pihole-updatelists - firebog (tick)"
; Group with ID=2 will use 'nocross' list of adlists
[GroupB_adlists]
ADLISTS_URL="https://v.firebog.net/hosts/lists.php?type=nocross"
GROUP_ID=-2
COMMENT="pihole-updatelists - firebog (nocross)"
You will want to have a different COMMENT value in each section, they have to be unique and one must not match the other!
Main configuration (the one without section header) is processed first, then the sections in the order of their appearance.
IMPORTANT: You can only use selected variables in sections:
ADLISTS_URL, WHITELIST_URL, REGEX_WHITELIST_URL, BLACKLIST_URL, REGEX_BLACKLIST_URL, COMMENT, GROUP_ID, PERSISTENT_GROUP, GROUP_EXCLUSIVE, IGNORE_DOWNLOAD_FAILURE
You can pass multiple URLs to the list variables by separating them with whitespace (space or new line):
ADLISTS_URL="https://v.firebog.net/hosts/lists.php?type=tick https://raw.githubusercontent.com/you/adlists/master/my_adlists.txt"If one of the lists fails to download nothing will be affected for that list type.
| List | URL/Variable value | Description |
|---|---|---|
| Adlist (ADLISTS_URL) |
https://v.firebog.net/hosts/lists.php?type=tick | https://firebog.net - safe lists only |
| Whitelist (WHITELIST_URL) |
https://raw.githubusercontent.com/anudeepND/whitelist/master/domains/whitelist.txt | https://github.com/anudeepND/whitelist - commonly whitelisted |
| Regex blacklist (REGEX_BLACKLIST_URL) |
https://raw.githubusercontent.com/mmotti/pihole-regex/master/regex.list | https://github.com/mmotti/pihole-regex - basic regex rules |
Please note that mmotti/pihole-regex list can sometimes block domains that should not be blocked - any false positives should be reported to the repository to be included in the whitelist (in that case you might consider adding that list to the WHITELIST_URL too).
These can be used when executing pihole-updatelists.
| Option | Description |
|---|---|
--help, -h |
Show help message, which is simply this list |
--no-gravity, -n |
Force gravity update to be skipped |
--no-reload, -b |
Force lists reload to be skipped Only if gravity update is disabled either by configuration ( UPDATE_GRAVITY=false) or --no-gravity parameter |
--verbose, -v |
Turn on verbose mode |
--debug, -d |
Turn on debug mode |
--config=<file> |
Load alternative configuration file |
--env, -e |
Load configuration from environment variables |
--git-branch=<branch> |
Select git branch to pull remote checksum and update from Can only be used with --update and --version |
--update |
Update the script using selected git branch |
--rollback |
Rollback script version to previous |
--force |
Force update without checking for newest version |
--yes, -y |
Automatically reply YES to all questions |
--version |
Show script checksum (and also if update is available) |
By default, the script runs at random time (between 03:00 and 04:00) on Saturday, to change it you'll have to override timer unit file:
sudo systemctl edit pihole-updatelists.timer[Timer]
RandomizedDelaySec=5m
OnCalendar=
OnCalendar=Sat *-*-* 00:00:00
If systemd is not available you just modify the crontab entry in /etc/cron.d/pihole-updatelists:
14 6 * * 6 root /usr/local/sbin/pihole-updatelistsOverride service unit file:
sudo systemctl edit pihole-updatelists.service[Service]
Type=oneshot
ExecStartPre=echo "before"
ExecStartPost=echo "after"
If systemd is not available you just modify the crontab entry in /etc/cron.d/pihole-updatelists:
30 3 * * 6 root /home/pi/before.sh && /usr/local/sbin/pihole-updatelists && /home/pi/after.shYou can use ; instead of && if you don't want the execution to stop on previous command failure.
sudo sqlite3 /etc/pihole/gravity.db "UPDATE adlist SET comment = 'NEWCOMMENT' WHERE comment LIKE '%Managed by pihole-updatelists%'"
sudo sqlite3 /etc/pihole/gravity.db "UPDATE domainlist SET comment = 'NEWCOMMENT' WHERE comment LIKE '%Managed by pihole-updatelists%'"Replace NEWCOMMENT with your new desired comment value. This assumes Managed by pihole-updatelists is the old comment value, replace it with your old custom value when needed.
If you wish to add custom comments to entries you can use the following file syntax:
example-domain.com # your comment
Which will cause example-domain.com to have comment set to your comment | Managed by pihole-updatelists.
You can also add your comments directly through the Pi-hole's web interface by either appending or prepending the comment field for entries.
wget -O - https://raw.githubusercontent.com/jacklul/pihole-updatelists/master/install.sh | sudo bash -s uninstallor remove files manually:
sudo rm -vf /usr/local/sbin/pihole-updatelists /etc/bash_completion.d/pihole-updatelists /etc/systemd/system/pihole-updatelists.service /etc/systemd/system/pihole-updatelists.timer /etc/cron.d/pihole-updatelists