Sonoff USB 3.0 and Homematic CCU = Problem

[LordNicon79]

Hi,
I hope I'm right with my problem here. I have HA on my RPI4. I connected a Sonoff Zigbee 3.0 USB stick and a HomematicIP RFUSB stick. First of all, the Sonoff is found perfectly and works perfectly and then I install Homematic CCU and set up the USBStick. After the next reboot, the Sonoff USB STick will no longer work/start.
If I then deactivate Homematic CCU again, everything is ok again and the Sonoff Stick runs.
The protocol said:
Error setting up entry Sonoff Zigbee 3.0 USB Dongle Plus - Sonoff Zigbee 3.0 USB Dongle Plus for zha
15:45:05 – (FEHLER) components/zha/core/gateway.py
Couldn't start ZNP = Texas Instruments Z-Stack ZNP protocol: CC253x, CC26x2, CC13x2 coordinator (attempt 1 of 3)
15:45:05 – (WARNUNG) Zigbee Home Automation - Die Nachricht ist zum ersten Mal um 15:44:39 aufgetreten und erscheint 3 mal

Does anyone happen to have an idea or knows the problem? Unfortunately I am still too inexperienced to crack the problem

Thanks for your help! :-)

[Powerbarzi]

Hi, got the same problem yesterday, only that I use the ConbeeII Zigbee instead of the Sonoff. Have you already found something to fix the error?

[LordNicon79]

Hi, sorry, I found no fix until now. I use a separat ccu3. I will wait for a new Version of HA an try it again. 16.11.2022 10:22:10 Powerbarzi ***@***.***>:

…

Hi, got the same problem yesterday, only that I use the ConbeeII Zigbee instead of the Sonoff. Have you already found something to fix the error? — Reply to this email directly, view it on GitHub[#1980 (comment)], or unsubscribe[https://github.com/notifications/unsubscribe-auth/AKJB3PBLL37PI4IIRIAVDETWISRT5ANCNFSM6AAAAAAQ6VZQAM]. You are receiving this because you authored the thread.[Verfolgungsbild][https://github.com/notifications/beacon/AKJB3PDQ356ZLAHWJ6V73GTWISRT5A5CNFSM6AAAAAAQ6VZQAOWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAH5TAM.gif]

[IAmWebSA]

Same issue here.

Any solution available?

Setting tty config for USB somewhere?